References
- Ahmari, S., et al., 2012. Production of geopolymeric binder from blended waste concrete powder and fly ash. Construction and Building Materials, 35, 718–729. doi: https://doi.org/10.1016/j.conbuildmat.2012.04.044
- Ahmari, S. and Zhang, L., 2013. Utilization of cement kiln dust (CKD) to enhance mine tailings-based geopolymer bricks. Construction and Building Materials, 40, 1002–1011. doi: https://doi.org/10.1016/j.conbuildmat.2012.11.069
- Al Bakri, A.M., et al., 2011. The effect of curing temperature on physical and chemical properties of geopolymers. Physics Procedia, 22, 286–291. doi: https://doi.org/10.1016/j.phpro.2011.11.045
- Al Bakri, A.M., et al., 2012. Characterization of LUSI mud volcano as geopolymer raw material. Advanced Materials Research, 548, 82–86. doi: https://doi.org/10.4028/www.scientific.net/AMR.548.82
- Allahverdi, A., Mehrpour, K., and Kani, E.N., 2008. Taftan pozzolan-based geopolymer cement. IUST International Journal of Engineering Science, 19 (3), 1–5.
- Alonso, S. and Palomo, A., 2001. Alkaline activation of metakaolin and calcium hydroxide mixtures: influence of temperature, activator concentration and solids ratio. Materials Letters, 47 (1), 55–62. doi: https://doi.org/10.1016/S0167-577X(00)00212-3
- Anuar, K.A., Ridzuan, A.R.M., and Ismail, S., 2011. Strength characteristics of geopolymer concrete containing recycled concrete aggregate. International Journal of Civil & Environmental Engineering, 11 (1), 59–62.
- Austroads, 2006. Guide to pavement technology part 4D: stabilised materials. Sydney, NSW: Austroads.
- Austroads, 2010. Guide to pavement technology part 2: pavement structural design. Sydney, NSW: Austroads.
- Austroads, 2014. Cemented materials characterisation: final report. Sydney, NSW: Austroads.
- Board, T.R., Little, D.N., and Nair, S., 2009. Recommended practice for stabilization of subgrade soils and base materials. Washington, DC: The National Academies Press.
- British standard, 2016. EN 196-1 methods of testing cement – part 1: determination of strength.
- Burciaga-Díaz, O., Escalante-García, J.I., and, Scherer G., 2012. Strength and durability in acid media of alkali silicate-activated metakaolin geopolymers. Journal of the American Ceramic Society, 95 (7), 2307–2313. doi: https://doi.org/10.1111/j.1551-2916.2012.05249.x
- Camacho-Tauta, J., et al., 2016. Full-scale evaluation in a fatigue track of a base course treated with geopolymers. Procedia Engineering, 143, 18–25. doi: https://doi.org/10.1016/j.proeng.2016.06.071
- Chakrabarti, S., Kodikara, J.K., and Pardo, L., 2002. Survey results on stabilisation methods and performance of local government roads in Australia. Road & Transport Research, 11 (3), 3–16.
- Cheema, D., Lloyd, N., and Rangan, B.V., 2009. Durability of geopolymer concrete box culverts-A green alternative. Proceedings of 34th Conference on Our World in Concrete and Structures (pp. 85–92). CI Premier Pty Ltd.
- Cheng, T.W. and Chiu, J.P., 2003. Fire-resistant geopolymer produced by granulated blast furnace slag. Minerals Engineering, 16 (3), 205–210. doi: https://doi.org/10.1016/S0892-6875(03)00008-6
- Chindaprasirt, P., et al., 2011. High-strength geopolymer using fine high-calcium fly ash. Journal of Materials in Civil Engineering, 23 (3), 264–270. doi: https://doi.org/10.1061/(ASCE)MT.1943-5533.0000161
- Chindaprasirt, P., Chareerat, T., and Sirivivatnanon, V., 2007. Workability and strength of coarse high calcium fly ash geopolymer. Cement and Concrete Composites, 29 (3), 224–229. doi: https://doi.org/10.1016/j.cemconcomp.2006.11.002
- Chummuneerat, S., 2014. Performance, evaluation, and enhancement of hydrated cement treated crushed rock base (HCTCRB) as a road base material for Western Australian roads. Doctoral dissertation, Curtin University.
- Davidovits, J., 2011. Geopolymer chemistry and applications. Saint-Quentin: Institute Géopolymère.
- Davidovits, J., 2013. Geopolymer cement. A review. Geopolymer Institute. Technical Papers, 21, 1–11.
- Deevasan, K.K. and Ranganath, R.V., 2011. Geopolymer concrete using industrial byproducts. Proceedings of the Institution of Civil Engineers - Construction Materials, 164 (1), 43–50. doi: https://doi.org/10.1680/coma.900034
- Department of the Army, the Navy and the Air Force, 1994. Soil stabilization of pavements. Washington, DC: Headquaters Department of the Army, the Navy and the Air Force.
- De Vargas, A.S., et al., 2011. The effects of Na2O/SiO2 molar ratio, curing temperature and age on compressive strength, morphology and microstructure of alkali-activated fly ash-based geopolymers. Cement and Concrete Composites, 33 (6), 653–660. doi: https://doi.org/10.1016/j.cemconcomp.2011.03.006
- Dimas, D., Giannopoulou, I., and Panias, D., 2009. Polymerization in sodium silicate solutions: a fundamental process in geopolymerization technology. Journal of Materials Science, 44 (14), 3719–3730. doi: https://doi.org/10.1007/s10853-009-3497-5
- DOH, 2000. DH-S204/2000 Standard of soil cement base: Department of Highways. Thailand.
- DRR, 2013. DRR244-2013 Standard of soil cement base: Department of Rural Roads.
- Duxson, P.S.W.M., et al., 2007. The effect of alkali and Si/Al ratio on the development of mechanical properties of metakaolin-based geopolymers. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 292 (1), 8–20. doi: https://doi.org/10.1016/j.colsurfa.2006.05.044
- Duxson, P. and Provis, J.L., 2008. Designing precursors for geopolymer cements. Journal of the American Ceramic Society, 91 (12), 3864–3869. doi: https://doi.org/10.1111/j.1551-2916.2008.02787.x
- Feng, D., et al., 2012. Thermal activation of albite for the synthesis of one-part mix geopolymers. Journal of the American Ceramic Society, 95 (2), 565–572. doi: https://doi.org/10.1111/j.1551-2916.2011.04925.x
- Ghosh, K. and Ghosh, P., 2012. Effect of Na2O/Al2O3, SiO2/Al2O3 and w/b ratio on setting time and workability of fly ash based geopolymer. International Journal of Engineering Research and Applications, 2, 2142–2147.
- Gourley, J.T. and Johnson, G.B., 2005. Developments in geopolymer precast concrete. World congress geopolymer, Perth, Australia (pp. 139–143).
- Hanjitsuwan, S., et al., 2014. Effects of NaOH concentrations on physical and electrical properties of high calcium fly ash geopolymer paste. Cement and Concrete Composites, 45, 9–14. doi: https://doi.org/10.1016/j.cemconcomp.2013.09.012
- Hardjito, D., et al., 2004. Factors influencing the compressive strength of fly ash-based geopolymer concrete. Civil Engineering Dimension, 6 (2), 88–93.
- Hardjito, D., Cheak, C.C., and Ing, C.H.L., 2009. Strength and setting times of low calcium fly ash-based geopolymer mortar. Modern Applied Science, 2 (4), 3–11.
- Hardjito, D. and Fung, S.S., 2010. Fly ash-based geopolymer mortar incorporating bottom ash. Modern Applied Science, 4 (1), 44–52.
- Hu, S., et al., 2008. Bonding and abrasion resistance of geopolymeric repair material made with steel slag. Cement and Concrete Composites, 30, 239–244. doi: https://doi.org/10.1016/j.cemconcomp.2007.04.004
- Jitsangiam, P., Chindaprasirt, P., and Nikraz, H., 2013. An evaluation of the suitability of SUPERPAVE and Marshall asphalt mix designs as they relate to Thailand’s climatic conditions. Construction and Building Materials, 40, 961–970. doi: https://doi.org/10.1016/j.conbuildmat.2012.11.011
- Khale, D. and Chaudhary, R., 2007. Mechanism of geopolymerization and factors influencing its development: a review. Journal of Materials Science, 42 (3), 729–746. doi: https://doi.org/10.1007/s10853-006-0401-4
- Khater, H., 2012a. Effect of calcium on geopolymerization of aluminosilicate wastes. Journal of Materials in Civil Engineering, 24 (1), 92–101. doi: https://doi.org/10.1061/(ASCE)MT.1943-5533.0000352
- Khater, H.M., 2012b. Effect of cement kiln dust on geopolymer composition and its resistance to sulphate attack. International Journal of Civil and Structural Engineering, 2 (3), 749–762.
- Komnitsas, K. and Zaharaki, D., 2007. Geopolymerisation: a review and prospects for the minerals industry. Minerals Engineering, 20 (14), 1261–1277. doi: https://doi.org/10.1016/j.mineng.2007.07.011
- Li, C., Sun, H., and Li, L., 2010. A review: the comparison between alkali-activated slag (Si+Ca) and metakaolin (Si+Al) cements. Cement and Concrete Research, 40 (9), 1341–1349. doi: https://doi.org/10.1016/j.cemconres.2010.03.020
- Liew, Y.M., et al., 2012. Processing and characterization of calcined kaolin cement powder. Construction and Building Materials, 30, 794–802. doi: https://doi.org/10.1016/j.conbuildmat.2011.12.079
- Lloyd, N.A. and Rangan, B.V., 2010. Geopolymer concrete: a review of development and opportunities. Proceedings of 35th conference on Our World in Concrete and Structures, Singapore Concrete Institute, Singapore (pp. 25–27), August.
- Memon, F.A., et al., 2013. Effect of sodium hydroxide concentration on fresh properties and compressive strength of self-compacting geopolymer concrete. Journal of Engineering Science and Technology, 8 (1), 44–56.
- Mostafa, N. and Brown, P., 2005. Heat of hydration of high reactive pozzolans in blended cements: isothermal conduction calorimetry. Thermochimica Acta, 435 (2), 162–167. doi: https://doi.org/10.1016/j.tca.2005.05.014
- Nath, P. and Sarker, P.K., 2014. Effect of GGBFS on setting, workability and early strength properties of fly ash geopolymer concrete cured in ambient condition. Construction and Building Materials, 66, 163–171. doi: https://doi.org/10.1016/j.conbuildmat.2014.05.080
- NCHRP, 2004. Guide for mechanistic-empirical design of new and rehabilitated pavement structures. Washington, DC: National Cooperative Highway Research Program.
- Nuruddin, M.F., et al., 2011a. Compressive strength and interfacial transition zone characteristic of geopolymer concrete with different cast in-situ curing condition. World Academy of Science, Engineering and Technology (WASET), Dubai (pp. 25–28).
- Nuruddin, M.F., et al., 2011b. Utilisation of waste material in geopolymeric concrete. Proceedings of the Institution of Civil Engineers - Construction Materials, 164 (6), 315–327. doi: https://doi.org/10.1680/coma.2011.164.6.315
- Nusit, K., et al., 2017. Advanced characteristics of cement-treated materials with respect to strength performance and damage evolution. Journal of Materials in Civil Engineering, 29 (4), 04016255. doi: https://doi.org/10.1061/(ASCE)MT.1943-5533.0001772
- Pacheco-Torgal, F., et al., 2012. Durability of alkali-activated binders: a clear advantage over Portland cement or an unproven issue? Construction and Building Materials, 30, 400–405. doi: https://doi.org/10.1016/j.conbuildmat.2011.12.017
- Pacheco-Torgal, F., Castro-Gomes, J., and Jalali, S., 2008. Alkali-activated binders: a review. Part 2. About materials and binders manufacture. Construction and Building Materials, 22 (7), 1315–1322. doi: https://doi.org/10.1016/j.conbuildmat.2007.03.019
- Pacheco-Torgal, F., Castro-Gomes, J., and Jalali, S., 2009. Tungsten mine waste geopolymeric binder: preliminary hydration products investigations. Construction and Building Materials, 23 (1), 200–209. doi: https://doi.org/10.1016/j.conbuildmat.2008.01.003
- Palomo, A., et al., 2007. Opc-fly ash cementitious systems: study of gel binders produced during alkaline hydration. Journal of Materials Science, 42, 2958–2966. doi: https://doi.org/10.1007/s10853-006-0585-7
- Panias, D., Giannopoulou, I.P., and Perraki, T., 2007. Effect of synthesis parameters on the mechanical properties of fly ash-based geopolymers. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 301 (1), 246–254. doi: https://doi.org/10.1016/j.colsurfa.2006.12.064
- PCA, 1992. Soil-cement laboratory handbook. Chicago, IL: Portland Cement Association.
- Phoo-ngernkham, T. and Sinsiri, T., 2011. Workability and compressive strength of geopolymer mortar from fly ash containing diatomite. KKU Engineering Journal, 38 (1), 11–26.
- Phummiphan, I., et al., 2018. High calcium fly ash geopolymer stabilized lateritic soil and granulated blast furnace slag blends as a pavement base material. Journal of Hazardous Materials, 341, 257–267. doi: https://doi.org/10.1016/j.jhazmat.2017.07.067
- Raijiwala, D.B. and Patil, H.S., 2010. Geopolymer concrete a green concrete. 2010 2nd international conference on Chemical, Biological and Environmental Engineering (pp. 202–206), November.
- Rattanasak, U. and Chindaprasirt, P., 2009. Influence of NaOH solution on the synthesis of fly ash geopolymer. Minerals Engineering, 22, 1073–1078. doi: https://doi.org/10.1016/j.mineng.2009.03.022
- Siddiqui, K.S., 2007. Strength and durability of low-calcium fly ash-based geopolymer concrete. Final year honours dissertation, The University of Western Australia, Perth.
- Singh, B., et al., 2015. Geopolymer concrete: a review of some recent developments. Construction and Building Materials, 85, 78–90. doi: https://doi.org/10.1016/j.conbuildmat.2015.03.036
- Somna, K., et al., 2011. NaOH-activated ground fly ash geopolymer cured at ambient temperature. Fuel, 90 (6), 2118–2124. doi: https://doi.org/10.1016/j.fuel.2011.01.018
- Suwan, T., 2016. Development of self-cured geopolymer cement. Doctoral dissertation, Brunel University London, UK.
- Suwan, T. and Fan, M., 2014. Influence of OPC replacement and manufacturing procedures on the properties of self-cured geopolymer. Construction and Building Materials, 73, 551–561. doi: https://doi.org/10.1016/j.conbuildmat.2014.09.065
- Suwan, T. and Fan, M., 2017. Effect of manufacturing process on the mechanisms and mechanical properties of fly ash-based geopolymer in ambient curing temperature. Materials and Manufacturing Processes, 32 (5), 461–467. doi: https://doi.org/10.1080/10426914.2016.1198013
- Suwan, T., Fan, M., and Braimah, N., 2016a. Internal heat liberation and strength development of self-cured geopolymers in ambient curing conditions. Construction and Building Materials, 114, 297–306. doi: https://doi.org/10.1016/j.conbuildmat.2016.03.197
- Suwan, T., Fan, M., and Braimah, N., 2016b. Micro-mechanisms and compressive strength of geopolymer-Portland cementitious system under various curing temperatures. Materials Chemistry and Physics, 180, 219–225. doi: https://doi.org/10.1016/j.matchemphys.2016.05.069
- Tang, N., et al., 2018. Geopolymer as an additive of warm mix asphalt: preparation and properties. Journal of Cleaner Production, 192, 906–915. doi: https://doi.org/10.1016/j.jclepro.2018.04.276
- Tchakoute, H.K., et al., 2013. Utilization of volcanic ashes for the production of geopolymers cured at ambient temperature. Cement and Concrete Composites, 38, 75–81. doi: https://doi.org/10.1016/j.cemconcomp.2013.03.010
- Temuujin, J., Williams, R.P., and Van Riessen, A., 2009. Effect of mechanical activation of fly ash on the properties of geopolymer cured at ambient temperature. Journal of Materials Processing Technology, 209 (12), 5276–5280. doi: https://doi.org/10.1016/j.jmatprotec.2009.03.016
- Tenn, N., et al., 2015. Formulation of new materials based on geopolymer binders and different road aggregates. Ceramics International, 41 (4), 5812–5820. doi: https://doi.org/10.1016/j.ceramint.2015.01.010
- Theyse, H.L., De Beer, M., and Rust, F.C., 1996. Overview of South African mechanistic pavement design method. Transportation Research Record: Journal of the Transportation Research Board, 1539 (1), 6–17. doi: https://doi.org/10.1177/0361198196153900102
- Turner, L.K. and Collins, F.G., 2013. Carbon dioxide equivalent (CO2-e) emissions: a comparison between geopolymer and OPC cement concrete. Construction and Building Materials, 43, 125–130. doi: https://doi.org/10.1016/j.conbuildmat.2013.01.023
- Vaidya, S., Diaz, E.I., and Allouche, E.N., 2011. Experimental evaluation of self-cure geopolymer concrete for mass pour applications. World of coal ash (WOCA) conference, May 2011 (pp. 9–12).
- Van Jaarsveld, J.G., 2000. The physical and chemical characterisation of fly ash based geopolymers. Doctoral dissertation, University of Melbourne, Australia.
- Wen, H., et al., 2014. Characterization of cementitiously stabilized layers for use in pavement design and analysis (No. Project 4-36). Washington, DC: National Cooperative Highway Research Program.
- Xu, H. and Van Deventer, J.S.J., 2000. The geopolymerisation of alumino-silicate minerals. International Journal of Mineral Processing, 59 (3), 247–266. doi: https://doi.org/10.1016/S0301-7516(99)00074-5
- Xu, H. and van Deventer, J.S., 2003. The effect of alkali metals on the formation of geopolymeric gels from alkali-feldspars. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 216 (1–3), 27–44. doi: https://doi.org/10.1016/S0927-7757(02)00499-5
- Yip, C.K., Lukey, G.C., and Van Deventer, J.S.J., 2005. The coexistence of geopolymeric gel and calcium silicate hydrate at the early stage of alkaline activation. Cement and Concrete Research, 35 (9), 1688–1697. doi: https://doi.org/10.1016/j.cemconres.2004.10.042