References
- AASHTO T 198-15, 2015. Standard method of test for splitting tensile strength of cylindrical concrete specimens. Washington, DC: American Association of State and Highway Transportation Officials.
- Airey, G., and Collop, A.C., 2016. Mechanical and structural assessment of laboratory- and field-compacted asphalt mixtures. International Journal of Pavement Engineering, 17 (1), 50–63. doi:https://doi.org/10.1080/10298436.2014.925551.
- American Association of Highway and Transportation, 1995. Background of SUPERPAVE asphalt mixture design and analysis. Washington, DC: United States Departament of Transportation.
- American Association of State Highway Transportation Officials, 2002. Guide for design of pavement structures. Washington, DC: United States Departament of Transportation.
- American Foundry Society, 2017. Modern Casting Magazine – Metal Casters Go Green Ed.: Dec. 2017 P. 26 [online]. Available from: https://www.qgdigitalpublishing.com/publication/?i=626802#{%22issue_id%22:626802,%22publication_id%22:%2255001%22,%22page%22:26}[Accessed 21 Oct 2018].
- Appiah, J. K., Berko-Boateng, V. N., and Tagbor, T. A., 2017. Use of waste plastic materials for road construction in Ghana. Case Studies in Construction Materials, 6, 1–7. doi: https://doi.org/10.1016/j.cscm.2016.11.001
- Arabani, M., Moghadas Nejad, F., and Azarhoosh, A. R., 2012. Laboratory evaluation of recycled waste concrete into asphalt mixtures. International Journal of Pavement Engineering, 14 (6), 531–539. doi:https://doi.org/10.1080/10298436.2012.747685.
- ASTM D6009-96, 2001. Standard guide for sampling waste piles. West Conshohocken, PA: ASTM International. doi:https://doi.org/10.1520/D6009-96
- ASTM D6926-16, 2016. Standard practice for preparation of asphalt mixture specimens using marshall apparatus. West Conshohocken, PA: ASTM International. doi:https://doi.org/10.1520/D6926-16
- ASTM D7369-09, 2009. Standard test method for determining the resilient modulus of bituminous mixtures by indirect tension test. West Conshohocken, PA: ASTM International. doi:https://doi.org/10.1520/D7369-09
- Bakis, R., Koyuncu, H., and Demirbas, A., 2006. An investigation of waste foundry sand in asphalt concrete mixtures. Waste Management & Research, 24 (3), 269–274. doi:https://doi.org/10.1177/0734242X06064822.
- Bina, P., 2002. Methodology for the use of industrial waste in paving: case study of sand casting. Thesis (Master). Institute of Technological Research.
- Bureau of Transportation Statistics, 2014. National transportation statistics: U.S. automobile and truck fleets by use [online]. Bureau of transportation statistics – BTS. Available from: http://www.bts.gov/topics/national-transportation-statistics [Accessed 21 September 2018].
- Campelo, N.S., et al., 2019. Use of waste foundry sand (WFS) as filler in hot-mixed asphalt concrete. Intech Open: Use of Sandy Materials in Civil Engineering. doi:https://doi.org/10.5772/intechopen.89715.
- Costa, C., 2008. Casting sand discarded in substitution of fine aggregate in asphalt mixes for paving. Thesis (PhD). Military Engineering Institute.
- Dalhat, M.A., and Al-Abdul Wahhab, H. I., 2015. Performance of recycled plastic waste modified asphalt binder in Saudi Arabia. International Journal of Pavement Engineering, 18 (4), 349–357. doi:https://doi.org/10.1080/10298436.2015.1088150.
- Dyer, P.P.O.L., et al., 2018. Environmental characterization of Foundry Waste Sand (WFS) in hot mix asphalt (HMA) mixtures. Construction and Building Materials, 171, 474–484. doi:https://doi.org/10.1016/j.conbuildmat.2018.03.151.
- Environment Protection Agency, 2004. The CFR collection of all federal regulations codified and enforced by all federal agencies Title 40 [online]. Available from: https://www.epa.gov/rcra/resource-conservation-and-recovery-act-rcra-regulations [Accessed 21 October 2018 ].
- European Commission, 2014. Transport emissions: a European strategy for low-emission mobility [online]. European Commission – EC. Available from: http://www.ec.europa.eu/clima/policies/transport_en [Accessed 21 September 2018].
- Hainin, M.R., et al., 2015. Steel slag as a road construction material. Jurnal Teknologi (Sciences & Engineering), 73 (4), 33–38. doi:https://doi.org/10.11113/jt.v73.4282.
- Hassan, H.F., and Al-Shamsi, K., 2010. Characterisation of asphalt mixes containing MSW ash using the dynamic modulus |E*| test. International Journal of Pavement Engineering, 11 (6), 575–582. doi:https://doi.org/10.1080/10298436.2010.501865.
- Holtzer, M., and Dańko, R., 2015. Molds and cores systems in foundry. Microstructure and properties of ductile iron and compacted graphite iron castings. Springer Briefs in Materials, Cap, 2, 27–42. doi:https://doi.org/10.1007/978-3-319-14583-9_2.
- Hveem, F.N., 1955. Pavement deflection and fatigue failures. Bulletim, 114, 43–87.
- Klinsky, L. M. G., and Bardini, V. S. S., 2012. Re-use of residual cast sand in blends of hot-rolled asphalt sand. Transportes, 20, 27–34. doi:https://doi.org/10.4237/transportes.v20i4.614.
- National Confederation of Transports, 2018. Transport catalogue: road transportation [online]. National Confederation of Transports (Brazil) – CNT. Available from: http://www.anuariodotransporte.cnt.org.br/2018/ [Accessed 21 September 2018].
- National Cooperative Highway Research Program, 2004. Guide for Mechanistic-Empirical Design 1-37 A. ARA Inc., ERES Consultant Division, Champaign, IL.
- Suji, D., Poovendran, S., and Prabhakar, P., 2016. Experimental study on partial replacement of waste foundry sand in flexible pavements. International Journal of Civil and Structural Engineering Research, 4 (1), 188–197.
- Tavares, D. S., 2012. Laboratory evaluation of SMA asphalt mixture with aggregates of steel slag aggregates. Dissertation (Master), Federal University of Rio de Janeiro.
- Wesseling, D. H., 2005. A study of mechanical behaviour of asphalt concrete with industrial residues incorporated. Dissertation (Master), Federal University of Rio Grande do Sul.
- Witczak, M., 2005. Simple performance tests: summary of recommended methods and database. NCHRP Report 547. Washington, DC: Transportation Research Board.
- Yazoghli-Marzouk, O., et al., 2014. Recycling foundry sand in road construction–field assessment. Journal of Construction and Building Materials, 61, 69–78. doi:https://doi.org/10.1016/j.conbuildmat.2014.02.055.