References
- AASHTO, 2011. T 166 – bulk specific gravity of compacted hot mix asphalt (HMA) using saturated surface-dry specimens. Washington, DC: American Association of State Highway and Transportation Officials.
- AASHTO, 2012. T 312 – Preparing and determining the density of hot mix asphalt (HMA) specimens by means of the Superpave Gyratory Compactor. Washington, DC: American Association of State Highway and Transportation Officials.
- AASHTO, 2013. TP 105 – determining the fracture energy of asphalt mixtures using the semicircular bend geometry (SCB). Washington, D.C.: American Association of State Highway and Transportation Officials.
- AASHTO, 2016. TP 124 – Provisional standard method of test for determining the fracture potentional of asphalt mixtures using semicircular bend geometry (SCB) at intermediate temperature. Washington, DC: American Association of State Highway and Transportation Officials.
- AASHTO, 2018. TP 122 – Determinination of performance grade of physically aged asphalt binder using extended bending beam rheometer (BBR) method. Washington, DC: American Association of State Highway and Transportation Officials.
- Arabani, M., and Ferdowsi, B, 2008. Evaluating the semi-circular bending test for HMA mixtures. International Journal of Engineering-Transactions A: Basics, 22 (1), 47–58.
- Arafat, S., and Wasiuddin, N.M, 2019. A comparative study between the effectiveness of a softer grade binder and a rejuvenating agent in hot mix asphalt with reclaimed asphalt pavement. Airfield and Highway Pavements, 2019, 77–87.
- Asli, H., et al., 2012. Investigation on physical properties of waste cooking oil – rejuvenated bitumen binder. Construction and Building Materials, 37 (0), 398–405. Available from: https://doi.org/https://doi.org/10.1016/j.conbuildmat.2012.07.042.
- Braham, A., and Mudford, C, 2013. Development of fracture resistance curves for asphalt concrete. Journal of Materials in Civil Engineering, 25 (11), 1631–1637. Available from:. doi: https://doi.org/10.1061/(ASCE)MT.1943-5533.0000724
- Chen, M., et al., 2014a. Physical, chemical and rheological properties of waste edible vegetable oil rejuvenated asphalt binders. Construction and Building Materials, 66 (0), 286–298. Available from:. doi: https://doi.org/10.1016/j.conbuildmat.2014.05.033
- Chen, M., et al., 2014b. High temperature properties of rejuvenating recovered binder with rejuvenator, waste cooking and cotton seed oils. Construction and Building Materials, 59 (0), 10–16. Available from:. doi: https://doi.org/10.1016/j.conbuildmat.2014.02.032
- Chong, K.P., and Kuruppu, M.D, 1984. New specimen for fracture toughness determination for rock and other materials. International Journal of Fracture, 26 (2), R59–R62. Available from: https://doi.org/https://doi.org/10.1007/BF01157555.
- Chong, K.P., Kuruppu, M.D., and Kuszmaul, J.S., 1989. Fracture toughness determination of rocks with core-based specimens. In: S.P. Shah, S.E. Swartz, eds. Fracture of concrete and rock. New York: Springer, 13–25.
- D’angelo, J., Grzybowski, K., and Lewis, S, 2012. Asphalt binder modification with re-refined heavy vacuum distillation oil (RHVDO). Fifty-seventh annual conference of the Canadian Technical Asphalt Association (CTAA).
- Elseifi, M.A., et al., 2012. Modeling and evaluation of the cracking resistance of asphalt mixtures using the semi-circular bending test at intermediate temperatures. Road Materials and Pavement Design, 13 (sup1), 124–139. Available from: https://doi.org/https://doi.org/10.1080/14680629.2012.657035.
- EN 12697-44, 2010. Bituminous mixtures – test methods for hot mix asphalt – part 44: crack propagation by semi-circular bending test. Brussels: European Committee for Standardization.
- Falchetto, A.C., et al., 2018. Comparison of low-temperature fracture and strength properties of asphalt mixture obtained from IDT and SCB under different testing configurations. Road Materials and Pavement Design, 19 (3), 591–604. doi:https://doi.org/10.1080/14680629.2018.1418722.
- Hill, B., and Buttlar, W.G, 2016. Evaluation of polymer modification in asphalt mixtures through digital image correlation and performance space diagrams. Construction and Building Materials, 122, 667–673. Available from: http://www.sciencedirect.com/science/article/pii/S0950061816310364. doi: https://doi.org/10.1016/j.conbuildmat.2016.06.108
- Johnson, K.A.N., and Hesp, S.A, 2014. Effect of waste engine oil residue on the quality and durability of SHRP MRL binders. Transportation Research Board 93rd Annual Meeting, 2444 (1), 102–109. doi: https://doi.org/10.3141/2444-12
- Kim, M., et al., 2017. Density and SCB measured fracture resistance of temperature segregated asphalt mixtures. International Journal of Pavement Research and Technology, 10 (2), 112–121. doi: https://doi.org/10.1016/j.ijprt.2017.01.004
- Krans, R., Tolman, F., and Van De Ven, M, 1996. Semi-circular bending test: a practical crack growth test using asphalt concrete cores. RILEM proceedings, Chapman & Hall, 123-132.
- Kuruppu, M.D., and Chong, K.P, 2012. Fracture toughness testing of brittle materials using semi-circular bend (SCB) specimen. Engineering Fracture Mechanics, 91, 133–150. Available from: http://www.sciencedirect.com/science/article/pii/S0013794412000598. doi: https://doi.org/10.1016/j.engfracmech.2012.01.013
- Leng, Z., et al., 2012. Effect of reheating plant warm SMA on its fracture potential. 7th RILEM International Conference on Cracking in PavementsSpringer, 1341-1349.
- Li, X., et al., 2008. Effect of factors affecting fracture energy of asphalt concrete at low temperature. Road Materials and Pavement Design, 9 (sup1), 397–416. Available from: https://doi.org/https://doi.org/10.1080/14680629.2008.9690176 [Accessed 2014/07/21].
- Li, X. and Marasteanu, M, 2004. Evaluation of the low temperature fracture resistance of asphalt mixtures using the semi circular bend test (with discussion). Journal of the Association of Asphalt Paving Technologists, 73, 401–426.
- Li, X.J., and Marasteanu, M.O, 2010. Using semi circular bending test to evaluate low temperature fracture resistance for asphalt concrete. Experimental Mechanics, 50 (7), 867–876. Available from: https://doi.org/https://doi.org/10.1007/s11340-009-9303-0.
- Lim, I., Johnston, I., and Choi, S, 1993. Stress intensity factors for semi-circular specimens under three-point bending. Engineering Fracture Mechanics, 44 (3), 363–382. doi: https://doi.org/10.1016/0013-7944(93)90030-V
- Ma, T., et al., 2010. Compound rejuvenation of polymer modified asphalt binder. Journal Wuhan University of Technology, Materials Science Edition, 25 (6), 1070–1076. Available from: https://doi.org/https://doi.org/10.1007/s11595-010-0152-6.
- Marasteanu, M.O., et al., 2004. Low temperature fracture test for asphalt mixtures. Fifth international RILEM conference on Reflective Cracking in Pavements, RILEM Publications SARL, 249-256.
- Marasteanu, M., et al., 2012. National pooled fund study – Phase II: final report – investigations of low temperature cracking in asphalt pavements. MN/RC 2012-23.
- Ozer, H., et al., 2016. Fracture characterization of asphalt mixtures with high recycled content using Illinois semicircular bending test method and flexibility index. Transportation Research Record, 2575 (1), 130–137. doi: https://doi.org/10.3141/2575-14
- Pirmohammad, S., and Ayatollahi, M.R, 2014. Fracture resistance of asphalt concrete under different loading modes and temperature conditions. Construction and Building Materials, 53, 235–242. Available from: http://www.sciencedirect.com/science/article/pii/S095006181301129X. doi: https://doi.org/10.1016/j.conbuildmat.2013.11.096
- Romera, R., et al., 2006. Rheological aspects of the rejuvenation of aged bitumen. Rheologica Acta, 45 (4), 474–478. Available from: https://doi.org/https://doi.org/10.1007/s00397-005-0078-7.
- Saha, G., and Biligiri, K.P, 2016. Fracture properties of asphalt mixtures using semi-circular bending test: a state-of-the-art review and future research. Construction and Building Materials, 105, 103–112. Available from: http://www.sciencedirect.com/science/article/pii/S0950061815307200. doi: https://doi.org/10.1016/j.conbuildmat.2015.12.046
- Shen, J., Amirkhanian, S., and Aune Miller, J, 2007. Effects of rejuvenating agents on superpave mixtures containing reclaimed asphalt pavement. Journal of Materials in Civil Engineering, 19 (5), 376–384. Available from:. doi: https://doi.org/10.1061/(ASCE)0899-1561(2007)19:5(376)
- Shen, J., and Ohne, Y, 2002. Determining rejuvenator content for recycling reclaimed asphalt pavement by shrp binder specifications. International Journal of Pavement Engineering, 3 (4), 261–268. Available from: https://doi.org/https://doi.org/10.1080/1029843021000083685 [Accessed 28 September 2015].
- Teshale, E.Z, 2012. Low-temperature fracture behavior of asphalt concrete in semi-circular bend test. Minneapolis, MN, United States: University of Minnesota.
- Tran, N.H., Taylor, A., and Willis, R, 2012. Effect of rejuvenator on performance properties of HMA mixtures with high RAP and RAS contents. Auburn, AL: National Center for Asphalt Technology.
- Valero, 2010. Benicia refinery tour [online]. http://phx.corporate-ir.net/External.File?item=UGFyZW50SUQ9NTg3NTN8Q2hpbGRJRD0tMXxUeXBlPTM=&t=1 [Accessed Access Date 2018].
- Wu, Z., et al., 2005. Fracture resistance characterization of superpave mixtures using the semi-circular bending test. Journal of ASTM International, 2 (3), 1–15. doi: https://doi.org/10.1520/JAI12264
- Zargar, M., et al., 2012. Investigation of the possibility of using waste cooking oil as a rejuvenating agent for aged bitumen. Journal of Hazardous Materials, 233–234 (0), 254–258. Available from: https://doi.org/https://doi.org/10.1016/j.jhazmat.2012.06.021.
- Zaumanis, M., Mallick, R.B., and Frank, R, 2014. Determining optimum rejuvenator dose for asphalt recycling based on superpave performance grade specifications. Construction and Building Materials, 69 (0), 159–166. Available from: https://doi.org/https://doi.org/10.1016/j.conbuildmat.2014.07.035.