Advanced characterization of unbound granular materials for pavement structural design in Egypt

References

• AASHTO, 1993. Guide for design of pavement structure. Washington, DC: American Association of State Highway and Transportation Officials.
   Google Scholar
• AASHTO, 2003. The California bearing ratio. Washington, D.C., USA: AASHTO T 193-99.
   Google Scholar
• AASHTO, 2012. Classification of soils and soil-aggregate mixtures for highway construction Purposes. Washington, DC, USA: AASHTO M 145-91.
   Google Scholar
• AASHTO, 2012. Determining the resilient modulus of soils and aggregate materials. Washington, DC, USA: AASHTO T 307-99.
   Google Scholar
• AASHTO, 2012. Materials finer than 75-μm (No. 200) Sieve in mineral aggregates by Washing. Washington, DC, USA: AASHTO T 11-91.
   Google Scholar
• AASHTO, 2012. Moisture-density relations of soils using a 4.54-kg (10-Ib) rammer and a 457-mm (18-in.) Drop. Washington, D.C., USA: AASHTO T 180-97.
   Google Scholar
• AASHTO, 2012. Resistance to degradation of small-size coarse aggregate by Abrasion and impact in the Los Angeles machine. Washington, DC, USA: AASHTO T 96-99.
   Google Scholar
• AASHTO, 2012. Sieve analysis of fine and coarse aggregates. Washington, DC, USA: AASHTO T 27-99.
   Google Scholar
• AASHTO, 2012. Specific gravity and absorption of coarse aggregate. Washington, D.C., USA: AASHTO T 85-91.
   Google Scholar
• AASHTO, 2012. Specific gravity and absorption of fine aggregate. Washington, D.C., USA: AASHTO T 84-00.
   Google Scholar
• AASHTO, 2014. Determining the liquid limit of soils. Washington, DC, USA: AASHTO T 89-96.
   Google Scholar
• AASHTO, 2015. Determining the plastic limit and plasticity index of soils. Washington, D.C., USA: AASHTO T 90-00.
   Google Scholar
• Aboutalebi Esfahani, M. and and Goli, A., 2018. Effects of aggregate gradation on resilient modulus and CBR in unbound granular materials. International Journal of Transportation Engineering, 5 (4), 367–381.
   Google Scholar
• Alnedawi, A., Nepal, K. P., and Al-Ameri, R., 2019a. New shakedown criterion and permanent deformation properties of unbound granular materials. Journal of Modern Transportation, 27 (2), 108–119. doi: https://doi.org/10.1007/s40534-019-0185-2
   Web of Science ®Google Scholar
• Alnedawi, A., Nepal, K. P., and Al-Ameri, R., 2019b. Permanent deformation prediction model of unbound granular materials for flexible pavement design. Transportation Infrastructure Geotechnology, 6 (1), 39–55. doi: https://doi.org/10.1007/s40515-018-00068-1
   Google Scholar
• Angell, D. J., 1988. Technical basis for pavement design manual. Brisbane, Queensland: Main Roads Department.
   Google Scholar
• ARA, 2008. Local calibration guidance for the recommended guide for mechanistic-empirical design of new and rehabilitated pavement structures. Final report, NCHRP Project 1-40B. Washington, DC: Transportation Research Board of the National Academies.
   Google Scholar
• ARA, Inc., ERES Consultants Division, 2004. Guide for mechanistic– empirical design of new and rehabilitated pavement structures. Final report, NCHRP Project 1-37A. Washington, DC: Transportation Research Board of the National Academies. http://www.trb.org/mepdg/guide.htm.
   Google Scholar
• Arshad, M, 2018. Correlation between Resilient Modulus (MR) and Constrained Modulus (MC) values of granular materials. Construction and Building Materials, 159, 440–450. doi: https://doi.org/10.1016/j.conbuildmat.2017.10.047
   Web of Science ®Google Scholar
• Austroads, 2012. Pavement design – A guide to the structural design of road pavements. Melbourne, Australia: Kelvin Press.
   Google Scholar
• Bayomy, F. and Safwan, K., 2010. Dynamic characterization of egyptian hot mix asphalt concrete for highway pavement design and evaluation. Idaho, USA: NSF Project, National Institute for Advanced Transportation Technology.
   Google Scholar
• Bilodeau, J. P., Plamondon, C. O., and Dore, G., 2016. Estimation of resilient modulus of unbound granular materials used as pavement base: combined effect of grainsize distribution and aggregate source frictional properties. Materials and Structures, 49 (10), 4363–4373. doi: https://doi.org/10.1617/s11527-016-0793-9
   Web of Science ®Google Scholar
• Brown, S. F. and Hyde, A. F. L., 1975, Significance of cyclic Confining stress in repeated load triaxial testing of granular material. In: Transportation research Record 537, Washington, DC: TRB, National Research Council, 49–58.
   Google Scholar
• Çöleri, E., 2007. Relationship between resilient modulus and soil index properties of unbound materials. Master’s Thesis. Middle East Technical University, Ankara, Turkey.
   Google Scholar
• Cunninghama, C. N., Evansb, T. M., and Tayebalib, A. A., 2013. Gradation effects on the mechanical response of crushed stone aggregate. International Journal of Pavement Engineering, 14 (3), 231–241. doi: https://doi.org/10.1080/10298436.2012.690518
   Web of Science ®Google Scholar
• Egyptian Code of Practice (ECP), 2008a. Urban and rural roads, edition 1: road materials and their tests (part four). Egypt: The Ministry of Housing, Utilities and Urban Communities.
   Google Scholar
• Egyptian Code of Practice (ECP), 2008b. Urban and rural roads, edition 1: structure design of urban and rural roads (part six). Egypt: The Ministry of Housing, Utilities and Urban Communities.
   Google Scholar
• El-Ashwah, A. S., et al., 2019. A new approach for developing resilient modulus master surface to characterize granular pavement materials and subgrade soils. Construction and Building Materials, 194, 372–385. doi: https://doi.org/10.1016/j.conbuildmat.2018.10.212
   Web of Science ®Google Scholar
• El-Ashwah, A. S., et al., 2020. Advanced Characterization of unbound granular materials for pavement structural design in egypt. In: Presented at the 99th annual meeting of the transportation research board, Paper No. 20-02764. Washingto, DC, USA.
   Google Scholar
• Freeme, C. R., Maree, J. H., and Viljoen, A. W., 1982. Mechanistic design of asphalt pavements and verification using the heavy vehicle simulator. Pretoria, South Africa: National Institute for Transport and Road Research.
   Google Scholar
• Ghabchi, R., et al., 2013. Effect of gradation and source properties on stability and drainability of aggregate bases: a laboratory and field study. International Journal of Pavement Engineering, 14 (3), 274–290. doi: https://doi.org/10.1080/10298436.2012.711475
   Web of Science ®Google Scholar
• Green, J. L. and Hall, J. W., 1975. Nondestructive vibratory testing of airport pavements. Volume 1: Experimental test results and development of evaluation methodology and procedure. Technical Report S-75-14. Vicksburg, Miss.: U.S. Army Engineers Waterways Experiment Station.
   Google Scholar
• Gu, F., et al., 2014. Estimation of resilient modulus of unbound aggregates using performance-related base course properties. Journal of Materials in Civil Engineering, 27 (6), 04014188-1–10.
   Web of Science ®Google Scholar
• Heukelom, W. and Klomp, A., 1962. Dynamic testing as a means of controlling pavements during and after construction. In: Proceedings of the 1st international conference on structural design of asphalt pavements, International Society for Asphalt Pavements, Lino Lakes, Minn.
   Google Scholar
• Hopkins, T. C., 1994. Minimum bearing strength of soil subgrades required to construct flexible pavements. In: Proceedings of the 4th international conference on the bearing capacity of roads and airfields, University of Minnesota, Minneapolis, Vol. 1, 605–617.
   Google Scholar
• Hossain, M. and Lane, D., 2015. Development of a catalog of resilient modulus values for aggregate base for use with the Mechanistic-empirical Pavement Design Guide (MEPDG). Charlottesville, VA: Virginia Center for Transportation Innovation and Research.
   Google Scholar
• Huang, Y., 2004. Pavement analysis and design. 2nd ed. Upper Saddle River: Prentice Hall.
   Google Scholar
• Hyndman, R. and Koehler, A. B., 2006. Another look at measures of forecast accuracy. International Journal of Forecasting, 22 (4), 679–688. doi: https://doi.org/10.1016/j.ijforecast.2006.03.001
   Web of Science ®Google Scholar
• Ibrahim, E. M., et al., 2017. Effect of geogrid reinforcement on flexible pavements. Innovative Infrastructure Solutions, 2 (54), 1–15.
   Google Scholar
• Ji, R., et al., 2014. Evaluation of resilient modulus of subgrade and base materials in indiana and its implementation in MEPDG. The Scientific World Journal, 2014, 1–14. https://doi.org/https://doi.org/10.1155/2014/372838.
   Google Scholar
• Kolisoja, P, 1997. Resilient deformation characteristics of granular materials. PhD Dissertation. Tampere University of Technology, Publication No 223, Finland.
   Google Scholar
• Lekarp, F., Isacsson, U., and Dawson, A., 2000. State of the Art. I: resilient response of unbound aggregates. Journal of Transportation Engineering, 126 (1), 66–75. doi: https://doi.org/10.1061/(ASCE)0733-947X(2000)126:1(66)
   Web of Science ®Google Scholar
• Mousa, E., et al., 2017. Laboratory characterization of reclaimed asphalt pavement for road construction in Egypt. Canadian Journal of Civil Engineering, 44 (6), 417–425. doi: https://doi.org/10.1139/cjce-2016-0435
   Web of Science ®Google Scholar
• NAASRA, National Association of Australian State Road Authorities, 1950. Highway bridge design specification, Sydney, Australia.
   Google Scholar
• Nguyen, B, 2016. Resilient behaviour of fine-grained and granular materials for the design of flexible pavements. PhD Dissertation. Civil, Environmental and Chemical Engineering, RMIT University.
   Google Scholar
• Pan, T. and Tutumluer, E., 2005. Imaging based evaluation of coarse aggregate size and shape properties affecting pavement performance. Austin, TX, United States: Geotechnical Special Publication.
   Google Scholar
• Paterson, W. D. O., 1978. Towards applying mechanistic pavement design in practice. In: Proceedings of the 9th Australian Road research Board Conference, University of Queensland, Brisbane, Australia.
   Google Scholar
• Paterson, W. D. O. and Maree, J. H., 1978. An interim mechanistic procedure for the structural design of asphalt pavements. Technical Report RP/5/78. National Institute for Transport and Road Research, CSIR, South Africa.
   Google Scholar
• Pellinen, T. K., 2001. Investigation of the use of dynamic modulus as indicator of hot-mix asphalt performance. Ph.D. Dissertation. Department of Civil and Environmental Engineering, Arizona State University, Tempe, AZ.
   Google Scholar
• Powell, W. D., et al., 1984. The structural design of bituminous roads. Report LR 1132. Crowthorne, England: U.K. Transport and Road Research Laboratory.
   Google Scholar
• Utah Department of Transportation (UDOT), 2012. UDOT Pavement Design Manual of Instruction, Utah Department of Transportation, Salt Lake City, UT.
   Google Scholar
• Webb, W. M. and Campbell, B. E., 1986. Preliminary investigation into resilient modulus testing for new AASHTO pavement design guide. Atlanta, GA: Office of Materials and Research, Georgia Department of Transportation.
   Google Scholar
• WSDOT Pavement Policy, 2015. Washington State Department of Transportation, Construction Division Pavements Office, Olympia.
   Google Scholar
• Xiao, Y., et al., 2012. Gradation effects influencing mechanical properties of aggregate base-granular subbase materials in Minnesota. Transportation Research Record: Journal of the Transportation Research Board, 2267, 14–26. doi: https://doi.org/10.3141/2267-02
   Web of Science ®Google Scholar
• Xiao, Y. and Tutumluer, E., 2012. Best value Granular material for road foundations. Final report to Minnesota DOT. Saint Paul: Minnesota DOT.
   Google Scholar
• Xiao, Y. and Tutumluer, E., 2016. Gradation and packing characteristics affecting stability of granular materials: Aggregate imaging-based discrete element modeling approach. International Journal of Geomechanics, 17 (3), 04016064-1–18.
   Web of Science ®Google Scholar