References
- Abu Al-Rub, R. K., et al., 2012. Comparing finite element and constitutive modelling techniques for predicting rutting of asphalt pavements. International Journal of Pavement Engineering, 13 (4), 322–338. doi: https://doi.org/10.1080/10298436.2011.566613
- Chen, J., Wang, H., and Xie, P., 2019. Pavement temperature prediction: theoretical models and critical affecting factors. Applied Thermal Engineering, 158.
- Darabi, M. K., et al., 2011. A thermo-viscoelastic–viscoplastic–viscodamage constitutive model for asphaltic materials. International Journal of Solids and Structures, 48 (1), 191–207. doi: https://doi.org/10.1016/j.ijsolstr.2010.09.019
- Hermansson, Å, 2000. Simulation model for calculating pavement temperatures including maximum temperature. Transportation Research Record, 1699 (1), 134–141. doi: https://doi.org/10.3141/1699-19
- Huang, C. W., et al., 2010. Three-dimensional simulations of asphalt pavement permanent deformation using a nonlinear viscoelastic and viscoplastic model. Journal of Materials in Civil Engineering, 23 (1), 56–68. doi: https://doi.org/10.1061/(ASCE)MT.1943-5533.0000022
- Liu, H., Luo, R., and Lv, H, 2018. Establishing continuous relaxation spectrum based on complex modulus tests to construct relaxation modulus master curves in compliance with linear viscoelastic theory. Construction and Building Materials, 165, 372–384. doi: https://doi.org/10.1016/j.conbuildmat.2017.12.204
- Lu, Y., Lu, L., and Wright, P. J, 2002. Visco-elastoplastic method for pavement performance evaluation. Proceedings of the Institution of Civil Engineers-Transport, 153 (4), 227–234. doi: https://doi.org/10.1680/tran.2002.153.4.227
- Lytton, R. L., et al., 2018a. Characteristics of damaged asphalt mixtures in tension and compression. International Journal of Pavement Engineering, 19 (3), 292–306. doi: https://doi.org/10.1080/10298436.2017.1347439
- Lytton, R. L., et al., 2018b. Characteristics of undamaged asphalt mixtures in tension and compression. International Journal of Pavement Engineering, 19 (3), 192–204. doi: https://doi.org/10.1080/10298436.2017.1279489
- Ma, T, Zhang, D, Zhang, Y, et al., 2018. Simulation of wheel tracking test for asphalt mixture using discrete element modelling. Road Materials and Pavement Design, 19 (2), 367–384. doi: https://doi.org/10.1080/14680629.2016.1261725
- Muthadi, N. R., and Kim, Y. R, 2008. Local calibration of mechanistic-empirical pavement design guide for flexible pavement design. Transportation Research Record, 2087 (1), 131–141. doi: https://doi.org/10.3141/2087-14
- Park S, W, and Schapery R, A, 1999. Methods of interconversion between linear viscoelastic material functions. part I—A numerical method based on Prony series. International Journal of Solids and Structures, 36 (11), 1653–1675. doi: https://doi.org/10.1016/S0020-7683(98)00055-9
- Perzyna, P, 1971. Thermodynamic theory of viscoplasticity. Advances in Applied Mechanics, 11, 313–354. doi: https://doi.org/10.1016/S0065-2156(08)70345-4
- Qin, Y, 2016. Pavement surface maximum temperature increases linearly with solar absorption and reciprocal thermal inertial. International Journal of Heat and Mass Transfer, 97, 391–399. doi: https://doi.org/10.1016/j.ijheatmasstransfer.2016.02.032
- Qin, Y., and Hiller, J. E, 2013. Ways of formulating wind speed in heat convection significantly influencing pavement temperature prediction. Heat and Mass Transfer, 49 (5), 745–752. doi: https://doi.org/10.1007/s00231-013-1116-0
- Rao, Narasimha, & Kumar, K. V., and K, R., 2007. Simulation of tire dynamic behavior using various finite element techniques. International Journal for Computational Methods in Engineering Science and Mechanics, 8 (5), 363–372. doi: https://doi.org/10.1080/15502280701471566
- Saevarsdottir, T, Erlingsson, S, and Carlsson, H, 2016. Instrumentation and performance modelling of heavy vehicle simulator tests. International Journal of Pavement Engineering, 17 (2), 148–165. doi: https://doi.org/10.1080/10298436.2014.972957
- Wang, H, Al-Qadi I, L, and Stanciulescu, I, 2012. Simulation of tyre–pavement interaction for predicting contact stresses at static and various rolling conditions. International Journal of Pavement Engineering, 13 (4), 310–321. doi: https://doi.org/10.1080/10298436.2011.565767
- Wang Y, S, and Wu, J, 2009. Numberical analysis on the steady-state rolling of load-Carrying tire[C]//2009 s International Conference on Intelligent Computation Technology and Automation. IEEE, 4, 566–569.
- Wasage, T., Statsna, J., and Zanzotto, L, 2010. Repeated loading and unloading tests of asphalt binders and mixes. Road Materials and Pavement Design, 11 (3), 725–744. doi: https://doi.org/10.1080/14680629.2010.9690301
- Williams, R. C., and Prowell, B. D, 1999. Comparison of laboratory wheel-tracking test results with Wes Track performance. Transportation Research Record, 1681 (1), 121–128. doi: https://doi.org/10.3141/1681-15
- Zhang, Y. Anisotropic characterization of asphalt mixtures in compression. Diss. 2012.
- Zhang, Y., et al., 2015. A generalized Drucker–prager viscoplastic yield surface model for asphalt concrete. Materials and Structures, 48 (11), 3585–3601. doi: https://doi.org/10.1617/s11527-014-0425-1
- Zhang, Y, Ma, T, Ling, M, et al., 2019. Predicting dynamic shear modulus of asphalt Mastics using Discretized-element Simulation and Reinforcement Mechanisms. Journal of Materials in Civil Engineering, 31 (8), 04019163. doi: https://doi.org/10.1061/(ASCE)MT.1943-5533.0002831
- Zhu, H., and Sun, L, 2013. Mechanistic rutting prediction using a two-stage viscoelastic-viscoplastic damage constitutive model of asphalt mixtures. Journal of Engineering Mechanics, 139 (11), 1577–1591. doi: https://doi.org/10.1061/(ASCE)EM.1943-7889.0000598
- Zienkiewicz, Olek C, Taylor, Robert L., and Fox, David, 2014. The finite element method for solid and structural mechanics. Elsevier, 147–177.