References
- Airey, G.D., 2003. Rheological properties of styrene butadiene styrene polymer modified road bitumens. Fuel, 82 (14), 1709–1719.
- Amin, I., et al., 2016. Laboratory evaluation of asphalt binder modified with carbon nanotubes for Egyptian climate. Construction and Building Materials, 121, 361–372.
- Ashish, P.K. and Singh, D., 2017. High-and intermediate-temperature performance of asphalt binder containing carbon nanotube using different rheological approaches. Journal of Materials in Civil Engineering, 30 (1), 4017254.
- ASTM International, 2009. ASTM D2493, Standard Viscosity-Temperature Chart for Asphalts’ American Society for Testing and Materials, Pennsylvania, USA.
- Azargohar, R. and Dalai, A.K., 2005. Production of activated carbon from luscar char: experimental and modeling studies. Microporous and Mesoporous Materials, 85 (3), 219–225.
- Bala, N. and Napiah, M., 2018. Fatigue life and rutting performance modelling of nanosilica/polymer composite modified asphalt mixtures using weibull distribution. International Journal of Pavement Engineering, 0 (0), 1–10.
- Bala, N., Napiah, M., and Kamaruddin, I., 2018. Nanosilica composite asphalt mixtures performance-based design and optimisation using response surface methodology. International Journal of Pavement Engineering, 8436, 1–12.
- Behnood, A. and Olek, J., 2017. Rheological properties of asphalt binders modified with styrene-butadiene-styrene (SBS), ground tire rubber (GTR), or polyphosphoric acid (PPA). Construction and Building Materials, 151, 464–478.
- Bolotin, K.I., et al., 2008. Ultrahigh electron mobility in suspended graphene. Solid State Communications, 146 (9–10), 351–355.
- Can, M.Y., Kaya, Y., and Algur, O.F., 2006. Response surface optimization of the removal of nickel from aqueous solution by cone biomass of pinus sylvestris. Bioresource Technology, 97 (14), 1761–1765.
- Chen, D., Feng, H., and Li, J., 2012. Graphene oxide: preparation, functionalization, and electrochemical applications. Chemical Reviews, 112 (11), 6027–6053.
- Cui, Y., Kundalwal, S.I., and Kumar, S., 2016. Gas barrier performance of graphene/polymer nanocomposites. Carbon, 98, 313–333.
- Devi, S.C. and Khan, R.A., 2020. Effect of graphene oxide on mechanical and durability performance of concrete. Journal of Building Engineering, 27 (October 2019), 101007.
- Dikin, D.A., et al., 2007. Preparation and characterization of graphene oxide paper. Nature, 448 (7152), 457–460.
- Enieb, M. and Diab, A., 2017. Characteristics of asphalt binder and mixture containing nanosilica. International Journal of Pavement Research and Technology, 10 (2), 148–157.
- Fang, C., et al., 2013. Nanomaterials applied in asphalt modification: a review. Journal of Materials Science and Technology, 29 (7), 589–594.
- Golestani, B., et al., 2015. Nanoclay application to asphalt concrete: characterization of polymer and linear nanocomposite-modified asphalt binder and mixture. Construction and Building Materials, 91, 32–38.
- Haghshenas, H.F., et al., 2015. A mathematical model for predicting stripping potential of hot mix asphalt. Construction and Building Materials, 75, 488–495.
- Hamzah, M.O., Gungat, L., and Golchin, B., 2017. Estimation of optimum binder content of recycled asphalt incorporating a wax warm additive using response surface method. International Journal of Pavement Engineering, 18 (8), 682–692.
- Isacsson, U. and Lu, X., 1995. Testing and appraisal of polymer modified road bitumens-state of the art. Materials and Structures, 28 (3), 139–159.
- Jeffry, S.N.A., et al., 2018. Effects of nanocharcoal coconut-shell ash on the physical and rheological properties of bitumen. Construction and Building Materials, 158, 1–10.
- JTG, 2004. JTG F40–2004 ‘Techinical specifications for construction of highway asphalt pavements’. China Ministry of Transport, Beijing.
- JTG, 2011. JTG E20–2011 ‘Standard test methods of bitumen and bituminous mixtures for highway engineering’. China Ministry of Transport, Beijing.
- Kavussi, A., et al., 2014. Moisture susceptibility of warm mix asphalt: a statistical analysis of the laboratory testing results. Construction and Building Materials, 52, 511–517.
- Khodaii, A., Haghshenas, H.F., and Kazemi Tehrani, H., 2012. Effect of grading and lime content on HMA stripping using statistical methodology. Construction and Building Materials, 34, 131–135.
- Kuilla, T., et al., 2010. Recent advances in graphene based polymer composites. Progress in Polymer Science (Oxford), 35 (11), 1350–1375.
- Kumar, H.V., Woltornist, S.J., and Adamson, D.H., 2016. Fractionation and characterization of graphene oxide by oxidation extent through emulsion stabilization. Carbon, 98, 491–495.
- Li, R., et al., 2017a. Developments of nano materials and technologies on asphalt materials – a review. Construction and Building Materials, 143, 633–648.
- Li, X., et al., 2017b. Effects of graphene oxide agglomerates on workability, hydration, microstructure and compressive strength of cement paste. Construction and Building Materials, 145, 402–410.
- Li, Y., Wu, S., and Amirkhanian, S., 2018. Investigation of the graphene oxide and asphalt interaction and its effect on asphalt pavement performance. Construction and Building Materials, 165, 572–584.
- Liu, K., Zhang, K., and Shi, X., 2018. Performance evaluation and modification mechanism analysis of asphalt binders modified by graphene oxide. Construction and Building Materials, 163, 880–889.
- Mansourkhaki, A., Ameri, M., and Daryaee, D., 2019. Application of different modifiers for improvement of chemical characterization and physical-rheological parameters of reclaimed asphalt binder. Construction and Building Materials, 203, 83–94.
- Marcano, D.C., et al., 2010. Improved synthesis of graphene oxide. ACS Nano, 4 (8), 4806–4814.
- Moghaddam, T.B., et al., 2015. Optimization of asphalt and modifier contents for polyethylene terephthalate modified asphalt mixtures using response surface methodology. Measurement: Journal of the International Measurement Confederation, 74, 159–169.
- Montgomery, D.C., 2012. Design and analysis of experiments. New York: Wiley.
- Nassar, A.I., Thom, N., and Parry, T., 2016. Optimizing the mix design of cold bitumen emulsion mixtures using response surface methodology. Construction and Building Materials, 104, 216–229.
- Papageorgiou, D.G., Kinloch, I.A., and Young, R.J., 2015. Graphene/elastomer nanocomposites. Carbon, 95, 460–484.
- Phiri, J., Gane, P., and Maloney, T.C., 2017. General overview of graphene: production, properties and application in polymer composites. Materials Science and Engineering B: Solid-State Materials for Advanced Technology, 215, 9–28.
- Saltan, M., Terzi, S., and Karahancer, S., 2018. Performance analysis of nano modified bitumen and hot mix asphalt. Construction and Building Materials, 173, 228–237.
- Sengoz, B. and Isikyakar, G., 2008. Analysis of styrene-butadiene-styrene polymer modified bitumen using fluorescent microscopy and conventional test methods. Journal of Hazardous Materials, 150 (2), 424–432.
- Shang, Y., et al., 2015. Effect of graphene oxide on the rheological properties of cement pastes. Construction and Building Materials, 96, 20–28.
- Soltani, M., et al., 2015. Analysis of fatigue properties of unmodified and polyethylene terephthalate modified asphalt mixtures using response surface methodology. Engineering Failure Analysis, 58, 238–248.
- Wang, Y., et al., 2011a. Graphene and graphene oxide: biofunctionalization and applications in biotechnology. Trends in Biotechnology, 29 (5), 205–212.
- Wang, Y., et al., 2011b. Graphene oxide/polybenzimidazole composites fabricated by a solvent-exchange method. Carbon, 49 (4), 1199–1207.
- Wu, S., et al., 2017. Evaluation of aging resistance of graphene oxide modified asphalt. Applied Sciences, 7 (7), 702.
- Zaaba, N.I., et al., 2017. Synthesis of graphene oxide using modified hummers method: solvent influence. Procedia Engineering, 184, 469–477.
- Zeng, W., et al., 2017. The utilization of graphene oxide in traditional construction materials: asphalt. Materials, 10 (1), 48.
- Zhang, H.L., et al., 2016. High and low temperature properties of nano-particles/polymer modified asphalt. Construction and Building Materials, 114, 323–332.
- Zhong, Y.L., et al., 2015. Scalable production of graphene via wet chemistry: progress and challenges. Materials Today, 18 (2), 73–78.
- Zhu, Y., et al., 2010. Graphene and graphene oxide: synthesis, properties, and applications. Advanced Materials, 22 (35), 3906–3924.
- Zhu, J., et al., 2019. Performance of hot and warm mix asphalt mixtures enhanced by nano-sized graphene oxide. Construction and Building Materials, 217, 273–282.