References
- AASHTO, 2002a. Specific gravity and absorption of fine aggregate. T 84/ 84. Washington, DC. n.d.
- AASHTO, 2002b. Standard method of test for determining the percentage of fracture in coarse aggregate. TP 61. Washington, DC. n.d. doi:https://doi.org/10.1520/d5821-13.
- AASHTO, 2002c. Standard method of test for resistance to degradation of small-size coarse aggregate by abrasion and impact in the Los Angeles machine. T 96. Washington, DC: American Association of State Highway and Transportation Officials.
- AASHTO, 2008. Standard method of test for plastic fines in graded aggregates and soils by use of the sand equivalent test. T 176. Washington, DC: American Association of State Highway and Transportation Officials.
- AASHTO, 2011. Standard method of test for uncompacted void content of fine aggregate. T 304. Washington, DC: American Association of State Highway and Transportation Officials.
- Al-Omari, A., et al., 2019. Effect of crumb tire rubber, microcrystalline synthetic wax, and nano silica on asphalt rheology. Road Materials and Pavement Design, 21, 1–23. doi:https://doi.org/10.1080/14680629.2018.1527718.
- Alsheyab, M.A., 2018. Evaluating the effect of nominal maximum aggregate size and aggregate gradation on surface frictional properties of superpave laboratory-compacted hot mix asphalt specimens. M.Sc. Thesis. Jordan University of Science and Technology. doi:https://doi.org/10.13140/RG.2.2.19146.72646.
- Asi, I.M., Qasrawi, H.Y., and Shalabi, F.I, 2007. Use of steel slag aggregate in asphalt concrete mixes. Canadian Journal of Civil Engineering, 34 (8), 902–911. doi:https://doi.org/10.1139/l07-025.
- The Asphalt Institute, 1980. Factors affecting compaction, Educational Series 9 (ES-9), November, Maryland.
- ASTM, D., 2010. 4791-10, standard test method for flat particles, elongated particles, or flat and elongated particles in coarse aggregate. West Conshohocken, PA: ASTM International. doi:https://doi.org/10.1520/d4791-05e01.
- ASTM, D., 2012. 2872-12, standard test method for effect of heat and air on a moving film of asphalt (rolling thin-film oven test). West Conshohocken, PA: ASTM International. doi:https://doi.org/10.1520/d2872-19.
- ASTM, D., 2015a. 4402 / 4402M-15, standard test method for viscosity determination of asphalt at elevated temperatures using a rotational viscometer. West Conshohocken, PA: ASTM International.
- ASTM, D., 2015b. 7175-15, Standard test method for determining the rheological properties of asphalt binder using a dynamic shear rheometer. West Conshohocken, PA: ASTM International. doi:https://doi.org/10.1520/d7175-08.
- ASTM, D., 2016. 6816-11, standard practice for determining low-temperature performance grade (PG) of asphalt binders. West Conshohocken, PA: ASTM International. doi:https://doi.org/10.1520/d6816-11r16.
- ASTM, D., 2018b. 6521-18, standard practice for accelerated aging of asphalt binder using a pressurized aging vessel (PAV). West Conshohocken, PA: ASTM International. doi:https://doi.org/10.1520/d6521-13.
- ASTM, E., 2006. 965-96, standard test method for measuring pavement macrotexture depth using a volumetric technique. West Conshohocken, PA: ASTM International. doi:https://doi.org/10.1520/e0965-96r06.
- ASTM, E., 2018a. 303-93, Standard test method for measuring surface frictional properties using the British pendulum tester. West Conshohocken, PA: ASTM International. doi:https://doi.org/10.1520/e0303-93r18.
- Design, Superpave Mix, 1996. Superpave Series No. 2 (SP-2). Asphalt Institute, Lexington, KY.
- Do, M.T., and Cerezo, V., 2015. Road surface texture and skid resistance. Surface Topography: Metrology and Properties, 3 (4), 16. doi:https://doi.org/10.1088/2051-672x/3/4/043001.
- Fwa, T., Choo, Y., and Liu, Y., 2003. Effect of aggregate spacing on skid resistance of asphalt pavement. Journal of Transportation Engineering, 129 (4), 420–426. doi:https://doi.org/10.1061/(asce)0733-947x(2003)129:4(420).
- Georgiou, P., and Loizos, A., 2019. Quality assurance of HMA pavement surface macrotexture: empirical models vs experimental approach. International Journal of Pavement Research and Technology, 12 (4), 356–363. doi:https://doi.org/10.1007/s42947-019-0042-z.
- Gheni, A.A., et al., 2017. Texture and design of green chip seal using recycled crumb rubber aggregate. Journal of Cleaner Production, 166, 1084–1101. doi:https://doi.org/10.1016/j.jclepro.2017.08.127.
- Goodman, S.N., Hassan, Y., and Abd El Halim, A.O., 2006. Preliminary estimation of asphalt pavement frictional properties from superpave gyratory specimens and mix parameters, CD-ROM. Washington, DC: Transportation Research Board, National Research Council. 14p. doi:https://doi.org/10.1177/0361198106194900116.
- Heitzman, M., 1992. Design and construction of asphalt paving materials with crumb rubber modifier. Transportation Research Record, 1339. https://trid.trb.org/view/370637.
- Khaki, A.M., Forouhid, A.E., and Zare, M., 2015. Comparison of the noise level and the skid resistance of asphalt pavement mixtures on road surface. Journal of Measurements in Engineering, 3 (3), 71–76. doi:https://doi.org/10.3166/rmpd.9.333-344.
- Khasawneh, M.A., 2017. Laboratory study on the frictional properties of HMA specimens using a newly developed asphalt polisher. International Journal of Civil Engineering, 15 (7), 1007–1017. doi:https://doi.org/10.1007/s40999-017-0186-7.
- Khasawneh, M.A., and Alsheyab, M.A., 2020. Effect of nominal maximum aggregate size and aggregate gradation on the surface frictional properties of hot mix asphalt mixtures. Construction and Building Materials, 244, 118355. https://doi.org/10.1016/j.conbuildmat.2020.118355.
- Khasawneh, M., and Liang, R.Y., 2011. Air void effects on frictional properties of existing asphalt pavement surfaces. International Journal of Pavements, 10 (1-2-3), 62–71.
- Khasawneh, M.A., Shbeeb, N.I., and Al-Omari, A.A., 2020. Analytical tool to shorten polishing time based on mean texture depth (MTD) of flexible pavements. Road Materials and Pavement Design, 21 (3), 737–756. doi:https://doi.org/10.1080/14680629.2018.1527717.
- King Jr., W., et al., 2013. Evaluation of open graded friction course (OGFC) mixtures. Rep. No. FHWA/LA.13/513. Baton Rouge, LA: Louisiana Transportation Research Center. doi:https://doi.org/10.1520/d7064_d7064m-08e01.
- Kogbara, R.B., et al., 2016. A state-of-the-art review of parameters influencing measurement and modeling of skid resistance of asphalt pavements. Construction and Building Materials, 114, 602–617. doi:https://doi.org/10.1016/j.conbuildmat.2016.04.002.
- Kowalski, K.J., McDaniel, R.S., and Olek, J., 2008. Development of a laboratory procedure to evaluate the influence of aggregate type and mixture proportions on the frictional characteristics of flexible pavements. Asphalt Paving Technology-Proceedings, 77, 35.
- Kummer, H.W., 1966. Unified theory of rubber and tire friction. University Park: Pennsylvania State University College of Engineering.
- Magnoni, M., et al., 2016. Evaluation of the effect of aggregates mineralogy and geometry on asphalt mixture friction. Journal of Civil & Environmental Engineering, 6 (3), doi:https://doi.org/10.4172/2165-784x.1000223.
- National Cooperative Highway Research Program, 2009. Guide for pavement friction. National Cooperative highway research program, (NCHRP Project 01-43). Washington, DC: Transportation Research Board. doi:https://doi.org/10.17226/23038.
- Nicholls, J.C., 1997. Review of UK porous asphalt trials. TRL Rep. 264. London: Transport Research Laboratory.
- Noyce, D., et al., 2005. Incorporating road safety into pavement management: maximizing asphalt pavement surface friction for road safety improvement. Madison, WI: Draft Literature Review and State Surveys; Midwest Regional University Transportation Center (UMTRI).
- Praticò, F.G., and Vaiana, R., 2013. A study on volumetric versus surface properties of wearing courses. Construction and Building Materials, 38, 766–775. doi:https://doi.org/10.1016/j.conbuildmat.2012.09.021.
- Schram, S., 2011. Specifications for aggregate frictional qualities in flexible pavements. Transportation Research Record: Journal of the Transportation Research Board, 2209 (1), 18–25. doi:https://doi.org/10.3141/2209-03.
- Wang, H., and Flintsch, G.W., 2007. Investigation of short and long-term variations of pavement surface characteristics at the Virginia Smart Road, CD-ROM. Washington, D.C., West Conshohocken, PA: Transportation Research Board, National Research Council , 17p. doi:https://doi.org/10.1520/d4402_d4402m-13.
- Woodward, D., et al., 2016. The wear of stone mastic asphalt due to slow speed high stress simulated laboratory trafficking. Construction and Building Materials, 110, 270–277. doi:https://doi.org/10.1016/j.conbuildmat.2016.02.031.