References
- Aboufoul, M., and Garcia, A, 2017. Influence of air voids characteristics on the hydraulic conductivity of asphalt mixture. Road Materials and Pavement Design, 18 (suppl 2), 39–49. doi: https://doi.org/10.1080/14680629.2017.1304256
- Afonso, M.L., et al., 2019. Hydraulic conductivity of the permeable asphalt pavement – laboratory vs In situ test. IOP Conference Series: Materials Science and Engineering, 471 (2), 022023-1–022023-10.
- Afonso, M.L., Fael, C.S., and Dinis-Almeida, M., 2020. Influence of clogging on the hydrologic performance of a double layer porous asphalt. International Journal of Pavement Engineering, 21 (6), 736–745. doi: https://doi.org/10.1080/10298436.2018.1508843
- Alber, S., 2013. Veränderung des Schallabsorptionsverhaltens von offenporigen Asphalten durch Verschmutzung [Variation of sound absorption characteristics of porous asphalt due to clogging processes]. Thesis (Phd). Veröffentlichungen des Instituts für Straßen- und Verkehrswesen, 46. University of Stuttgart.
- Alber, S., et al., 2018a. Influence of soiling phenomena on air-void microstructure and acoustic performance of porous asphalt pavement. Construction and Building Materials, 158, 938–948. doi: https://doi.org/10.1016/j.conbuildmat.2017.10.069
- Alber, S., et al., 2018b. Investigation of microstructure characteristics of porous asphalt with relevance to acoustic pavement performance. International Journal of Transportation Science and Technology, 7 (3), 199–207. doi: https://doi.org/10.1016/j.ijtst.2018.06.001
- Andrés-Valeri, V., et al., 2016. Laboratory assessment of the infiltration capacity reduction in clogged porous mixture surfaces. Sustainability, 8 (751), 1–11.
- Bajramovic, A., 2017. Untersuchung des Entwässerungsverhaltens von offenporigen Asphalten mit hydrologischen Modellen [Examination of drainage properties of porous asphalt with hydrological modelling]. Master‘s thesis. Institute for Road and Transport Science. University of Stuttgart.
- Barrett, M. E., 2008. Effects of a permeable friction couse on highway runoff. Journal of Irrigation and Drainage Engineering, 134 (5), 646–651. doi: https://doi.org/10.1061/(ASCE)0733-9437(2008)134:5(646)
- Barrett, M.E. and Shaw, C.B., 2007. Benefits of porous asphalt overlay on storm water quality. Transportation Research Record: Journal of the Transportation Research Board, 2025, 127–134. doi: https://doi.org/10.3141/2025-13
- Brown, R. A. and Borst, M., 2014. Evaluation of surface infiltration testing procedures in permeable pavement systems. Journal of Environmental Engineering, 140 (3), 04014001-1–040140011-2. doi: https://doi.org/10.1061/(ASCE)EE.1943-7870.0000808
- Charbeneau, R. J. and Barrett, M.E., 2008. Drainage hydraulics of permeable friction courses. Water Resources Research, 44 (W 04417), 1–10.
- Chow, V. T., Maidment, D. R., and Mays, L. W., 1988. Applied hydrology (reprint, 2008). New York: McGraw-Hill (McGraw-Hill International Editions Civil Engineering Series).
- Dan, H.-C., et al., 2017. Transient unsaturated flow in the drainage layer of a highway solution and drainage performance. Road Materials and Pavement Design, 7 (5), 1–26.
- Dyck, S. and Peschke, G., 1995. Grundlagen der Hydrologie [Basics of hydrology]. 3rd, strongly revised edition Berlin: Verlag für Bauwesen.
- Eck, B. J., Barrett, M. E., and Charbeneau, R. J., 2012. Coupled surface-subsurface model for simulating drainage from permeable friction course highways. Journal of Hydraulic Engineering, 138 (1), 13–22. doi: https://doi.org/10.1061/(ASCE)HY.1943-7900.0000474
- EN 12697-19:2012. Bituminous mixtures –test methods for hot mix asphalt, part 19: permeability of specimen, 2012.
- EN 12697-40:2012. Bituminous mixtures –test methods for hot mix asphalt, part 40: in situ drainability, 2012.
- Forschungsgesellschaft für Straßen- und Verkehrswesen (FGSV) (ed.), 2013a. Zusätzliche Technische Vertragsbedingungen und Richtlinien für den Bau von Verkehrsflächenbefestigungen aus Asphalt – ZTV Asphalt-StB [German guidelines and terms of contract for the construction of asphalt pavements]. Köln: FGSV-Verlag. Edition 2007/ Version 2013.
- Forschungsgesellschaft für Straßen- und Verkehrswesen (FGSV) (ed.), 2013b. Technische Lieferbedingungen für Asphaltmischgut für den Bau von Verkehrsflächenbefestigungen – TL Asphalt-StB [German guidelines and terms of delivery for asphalt mixes]. Köln: FGSV-Verlag. Edition 2007/ Version 2013.
- Fwa, T. F., Lim, E., and Tan, K. H., 2015. Comparison of permeability and clogging characteristics of porous asphalt and pervious concrete pavement materials. Transportation Research Record: Journal of the Transportation Research Board, 2511, 72–80. doi: https://doi.org/10.3141/2511-09
- Hamzah, M. O., et al., 2013. Laboratory simulation of the clogging behaviour of single-layer and two-layer porous asphalt. Road Materials and Pavement Design, 14 (1), 107–125. doi: https://doi.org/10.1080/14680629.2012.749803
- Huang, J., et al., 2016. Temporal evolution modeling of hydraulic and water quality performance of permeable pavements. Journal of Hydrology, 533, 15–27. doi: https://doi.org/10.1016/j.jhydrol.2015.11.042
- Jiang, W., et al., 2015. Experimental study on filtration effect and mechanism of pavement runoff in permeable asphalt pavement. Construction and Building Materials, 100, 102–110. doi: https://doi.org/10.1016/j.conbuildmat.2015.09.055
- Kroll, C., 2008: Modeling recession curves and low streamflows. In: M. G. Anderson and J. J. McDonnell, eds. Encyclopedia of hydrological sciences, vol. 126, Chichester: Wiley, 1-11.
- Kuang, X., et al., 2011. Pore-structure models of hydraulic conductivity for permeable pavement. Journal of Hydrology, 399 (3–4), 148–157. doi: https://doi.org/10.1016/j.jhydrol.2010.11.024
- Legret, M., et al., 2007. The quality of infiltrated water through porous and conventional asphalt pavements. Road Materials and Pavement Design, 8 (4), 617–641. doi: https://doi.org/10.1080/14680629.2007.9690092
- Lindly, J.K. and Elsayed, A., 1998. Open-graded highway bases make permeameter setup important. Journal of Transportation Engineering, 124 (2), 144–148. doi: https://doi.org/10.1061/(ASCE)0733-947X(1998)124:2(144)
- Mullaney, J. and Lucke, T., 2014. Practical review of pervious pavement designs. Clean – Soil, Air, Water, 42 (2), 111–124. doi: https://doi.org/10.1002/clen.201300118
- Pagotto, C., Legret, M., and Le Cloerec, P., 2000. Comparison of the hydraulic behaviour and the quality of highway runoff water according to the type of pavement. Water Research, 34 (18), 4446–4454. doi: https://doi.org/10.1016/S0043-1354(00)00221-9
- Radenberg, M., 2010. Laborverfahren zur Bestimmung der Wasserdurchlässigkeit von ungebundenen Baustoffen [Laboratory method for the determination of permeability of unbound construction material]. Forschung Straßenbau und Straßenverkehrstechnik, 1041. Bremerhaven: Wirtschaftsverlag N. W. Verlag für neue Wissenschaft.
- Ranieri, V., et al., 2014. Model of flow regimes in porous pavement and porous friction courses. Transportation Research Record: Journal of the Transportation Research Board, 2436, 156–166. doi: https://doi.org/10.3141/2436-16
- Ranieri, V., Ying, G., and Sansalone, J., 2012. Drainage modeling of roadway systems with porous friction courses. Journal of Transportation Engineering, 138 (4), 395–405. doi: https://doi.org/10.1061/(ASCE)TE.1943-5436.0000338
- Ressel, W., et al., 2012. Teilprojekt Polymer-Nanotechnologie zur Modifizierung der Poreninnenwandungen – Entwicklung von Materialien zur Herstellung von verbessertem Asphaltmischgut für offenporige Deckschichten, in: Verbundprojekt ‘Leiser Straßenverkehr 2’ – Reduzierte Reifen-Fahrbahn-Geräusche [ Polymer Nano-Technology for the Modification of Pore Surfaces – Development of Materials for Enhanced Porous Asphalt Mixes, in: Joint Project ‘Silent Traffic 2’], Berichte der Bundesanstalt für Straßenwesen, Reihe Straßenbau, S74, 123–166. Bergisch Gladbach: Wirtschaftsverlag N. W. Verlag für neue Wissenschaft.
- Ressel, W., et al., 2019. Modelling and simulation of pavement drainage. International Journal of Pavement Engineering, 20 (7), 801–810. doi: https://doi.org/10.1080/10298436.2017.1347437
- Rodriguez-Hernandez, J., et al., 2016. Laboratory study on the stormwater retention and runoff attenuation capacity of four permeable pavements. Journal of Environmental Engineering, 142 (2), 04015068-1–04015068-8. doi: https://doi.org/10.1061/(ASCE)EE.1943-7870.0001033
- Sansalone, J., Kuang, X., and Ranieri, V., 2008. Permeable pavement as a hydraulic and filtration interface for urban drainage. Journal of Irrigation and Drainage Engineering, 134 (5), 666–674. doi: https://doi.org/10.1061/(ASCE)0733-9437(2008)134:5(666)
- Schlüter, W. and Jefferies, C., 2002. Modelling the outflow from a porous pavement. Urban Water, 4 (3), 245–253. doi: https://doi.org/10.1016/S1462-0758(01)00065-6
- Watson, D., et al., 2018. Performance-based mix design for porous friction courses. NCHRP report, 877. Washington, D.C.: National Academies Press.
- Winroth, J., et al., 2017. Investigating generation mechanisms of tyre/road noise by speed exponent analysis. Applied Acoustics, 115, 101–108. doi: https://doi.org/10.1016/j.apacoust.2016.08.027
- Winston, R. J., et al., 2016. A simple infiltration test for determination of permeable pavement maintenance needs. Journal of Environmental Engineering, 142 (10), 06016005-1–06016005-5. doi: https://doi.org/10.1061/(ASCE)EE.1943-7870.0001121
- Young, P. C., 2008. Rainfall-runoff modeling: transfer function models. In: M. G. Anderson and J. J. McDonnell, eds. Encyclopedia of hydrological sciences, vol. 128. Chichester: Wiley, 1–16.
- Zhang, J., et al., 2017. Approximate simulation of storm water runoff over pervious pavement. International Journal of Pavement Engineering, 18 (3), 247–259. doi: https://doi.org/10.1080/10298436.2015.1065993
- Zhang, K., et al., 2018. Predicting long term removal of heavy metals from porous pavements for stormwater treatment. Water Research, 142, 236–245. doi: https://doi.org/10.1016/j.watres.2018.05.038
- Zhang, S. and Guo, Y., 2015. SWMM simulation of the storm water volume control performance of permeable pavement systems. Journal of Hydrologic Engineering, 20 (8), 06014010-1–06014010-5.