Effects of soaking on compressive strength of recycled polymer modified asphalt

References

• AASHTO, 1999. AASHTO T 104-99 (2020), Standard Method of Test for Soundness of Aggregate by Use of Sodium Sulfate or Magnesium Sulfate. Am. Assoc. State Highw. Transp. Off.
   Google Scholar
• AASHTO, 2002a. AASHTO T 96-02, Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine. Am. Assoc. State Highw. Transp. Off.
   Google Scholar
• AASHTO, 2002b. AASHTO T 165-02, Standard Method of Test for Effect of Water on Cohesion of Compacted Bituminous Mixtures. Am. Assoc. State Highw. Transp. Off.
   Google Scholar
• AASHTO, 2010. AASHTO T167-10 (2019), Standard Method of Test for Compressive Strength of Hot-Mix Asphalt. Am. Assoc. State Highw. Transp. Off.
   Google Scholar
• AASHTO, 2013. AASHTO T 84-13 (2017), Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate. Am. Assoc. State Highw. Transp. Off.
   Google Scholar
• AASHTO, 2015. AASHTO T 100-15 (2019), Standard Method of Test for Specific Gravity of Soils. Am. Assoc. State Highw. Transp. Off.
   Google Scholar
• Abo-Qudais, S. and Al-Shweily, H., 2007. Effect of aggregate properties on asphalt mixtures stripping and creep behavior. Construction and Building Materials, 21, 1886–1898. doi:https://doi.org/10.1016/j.conbuildmat.2005.07.014.
   Web of Science ®Google Scholar
• Akinro, A.O., et al., 2012. Environmental Impacts of polyethylene Generation and Disposal in Akure City Nigeria. Global journal of Science Frontier Research Agriculture and Biology, 12, 1–8.
   Google Scholar
• Akovali, G., 2012. Plastic materials: polyvinyl chloride (PVC). In: Toxicity of building materials. Elsevier, 23–53.
   Google Scholar
• Al-Hadedy, A.I., 2001. Influence of Polypropylene and Sulfur Wastes on Characteristics of Asphalt Paving Materials. M.Sc. Thesis, College of Engineering, Department of Civil Engineeing, Al-Mustansiriyah University.
   Google Scholar
• Al-Hadidy, A.-R.I, 2006. Evaluation of pyrolisis polypropylene modified asphalt paving materials. AL-Rafdain Engineering Journal, 14, 35–50.
   Google Scholar
• Al-Hadidy, A.I. and Yi-qiu, T., 2009. Effect of polyethylene on life of flexible pavements. Construction and Building Materials, 23, 1456–1464. doi:https://doi.org/10.1016/j.conbuildmat.2008.07.004.
   Web of Science ®Google Scholar
• Asphalt Institute, 1981. Cause and Prevention of stripping in Asphalt Pavements (Educational Series No. 10). Asphalt Institute, Lexington, KY, USA.
   Google Scholar
• Asphalt Institute, 1991. Thickness Design - Asphalt Pavements for Highways and Streets (Manual Series No. 1), 9th ed. Asphalt Institute, Lexington, KY, USA.
   Google Scholar
• Asphalt Institute, 1996. Mix Design Methods for Asphalt Concrete and Other Hot-Mix Types, 6th ed. Transportation Research Board.
   Google Scholar
• ASTM, 2014a. ASTM D1754/D1754M-09(2014), Standard Test Method for Effects of Heat and Air on Asphaltic Materials (Thin-Film Oven Test). ASTM Int. West Conshohocken, PA, 2014. Available from: www.astm.org.
   Google Scholar
• ASTM, 2014b. ASTM E1356-08 (2014), Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry. ASTM Int. West Conshohocken, PA, 2014. Available from: www.astm.org.
   Google Scholar
• ASTM, 2015a. ASTM C127-15, Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate. ASTM Int. West Conshohocken, PA, 2015. Available from: www.astm.org.
   Google Scholar
• ASTM, 2015b. ASTM D4402 / D4402M-15, Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer. ASTM Int. West Conshohocken, PA, 2015. Available from: www.astm.org.
   Google Scholar
• ASTM, 2015c. ASTM D7175-15, Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer. ASTM Int. West Conshohocken, PA, 2015. Available from: www.astm.org.
   Google Scholar
• ASTM, 2015d. ASTM D2042-15, Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene. ASTM Int. West Conshohocken, PA, 2015. Available from: www.astm.org.
   Google Scholar
• ASTM, 2015e. ASTM D6927-15, Standard Test Method for Marshall Stability and Flow of Asphalt Mixtures. ASTM Int. West Conshohocken, PA, 2015. Available from: www.astm.orgA.
   Google Scholar
• ASTM, 2017. ASTM D113-17, Standard Test Method for Ductility of Bituminous Materials. ASTM Int. West Conshohocken, PA, 2017. Available from: www.astm.org.
   Google Scholar
• ASTM, 2018a. ASTM D92-18, Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester. ASTM Int. West Conshohocken, PA, 2018. Available from: www.astm.org.
   Google Scholar
• ASTM, 2018b. ASTM D70-18a, Standard Test Method for Density of Semi-Solid Asphalt Binder (Pycnometer Method). ASTM Int. West Conshohocken, PA, 2018. Available from: www.astm.org.
   Google Scholar
• ASTM, 2020a. ASTM D5 / D5M-20, Standard Test Method for Penetration of Bituminous Materials. ASTM Int. West Conshohocken, PA, 2020. Available from: www.astm.org.
   Google Scholar
• ASTM, 2020b. ASTM D36 / D36M-14(2020), Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus). ASTM Int. West Conshohocken, PA, 2020. Available from: www.astm.org.
   Google Scholar
• ASTM, 2020c. ASTM D6926-20, Standard Practice for Preparation of Asphalt Mixture Specimens Using Marshall Apparatus. ASTM Int. West Conshohocken, PA, 2020. Available from: www.astm.org.
   Google Scholar
• Awwad, M.T. and Shbeeb, L., 2007. The use of polyethylene in Hot asphalt mixtures. American Journal of Applied Sciences, 4, 390–396. doi: https://doi.org/10.3844/ajassp.2007.390.396
   Google Scholar
• Baghaee Moghaddam, T., Soltani, M., and Karim, M.R., 2014. Experimental characterization of rutting performance of polyethylene terephthalate modified asphalt mixtures under static and dynamic loads. Construction and Building Materials, 65, 487–494. doi:https://doi.org/10.1016/j.conbuildmat.2014.05.006.
   Web of Science ®Google Scholar
• Bardesi, A., 1999. Use of modified bituminous binders, special bitumens with bitumen additives in pavement applications. Flex. Roads (C8), World Road Assoc.
   Google Scholar
• Behl, A., Jain, P. K, and Sharma, G., 2012. Study on waste polyvinyl chloride modified bitumen for paving applications. In: Proc., 25th ARRB Conf.–Shaping the Future: Linking Policy, Research and Outcomes, Perth, Australia.
   Google Scholar
• Behl, A., Sharma, G., and Kumar, G., 2014. A sustainable approach: Utilization of waste PVC in asphalting of roads. Construction and Building Materials, 54, 113–117. doi:https://doi.org/10.1016/j.conbuildmat.2013.12.050.
   Web of Science ®Google Scholar
• Blott, J.F.T., Lamb, D.R., and Pordes, O., 1954. Wetting and adhesion in relation to the surface dressing of roads with bituminous binders, in: adhesion and adhesive. Transportation Research Board, 116–119. Available from: https://trid.trb.org/view.aspx?id=97977.
   Google Scholar
• Breen, J.J. and Stephens, J.E., 1967. Report No. JHR-67-16: The Glass Transition Temperature and the mechanical properties of asphalt.
   Google Scholar
• Brûlé, B., 1996. Polymer-modified asphalt cements used in the road construction industry: basic principles. Transportation Research Record: Journal of the Transportation Research Board, 1535, 48–53. doi:https://doi.org/10.1177/0361198196153500107.
   Google Scholar
• BSI, 1990a. BS 812-110:1990, Testing aggregate. Methods for determination of aggregate crushing value (ACV). Br. Stand. Inst. 389 Chiswick High Road, London, W4 4AL, United Kingdom.
   Google Scholar
• BSI, 1990b. BS 812-111:1990, Testing aggregate. Methods for determination of ten per cent fines value (TFV). Br. Stand. Inst. 389 Chiswick High Road, London, W4 4AL, United Kingdom.
   Google Scholar
• BSI, 1990c. BS 812-112:1990, Testing aggregates. Method for determination of aggregate impact value (AIV). Br. Stand. Inst. 389 Chiswick High Road, London, W4 4AL, United Kingdom.
   Google Scholar
• Caro, S., et al., 2008. Moisture susceptibility of asphalt mixtures, part 1: mechanisms. International Journal of Pavement Engineering, 9, 81–98. doi:https://doi.org/10.1080/10298430701792128.
   Google Scholar
• Chee, C.Y., Azahari, H., and Rehan, M., 2014. Modification of bitumen characteristic by using recycled polyethylene. Molecular Crystals and Liquid Crystals, 604, 33–40. doi:https://doi.org/10.1080/15421406.2014.967652.
   Web of Science ®Google Scholar
• Dalhat, M.A. and Wahhab, H.I.A., 2017. Performance of recycled plastic waste modified asphalt binder in Saudi Arabia. International Journal of Pavement Engineering, 18, 349–357. doi:https://doi.org/10.1080/10298436.2015.1088150.
   Web of Science ®Google Scholar
• Emery, J. and Seddik, H., 1997. Moisture-damage of asphalt pavements and antistripping additives: causes, identification, testing and mitigation. Ottawa: Canada Transp. Assoc. Canada.
   Google Scholar
• Fim, F. de C., et al., 2013. Thermal, electrical, and mechanical properties of polyethylene-graphene nanocomposites obtained by in situ polymerization. Journal of Applied Polymer Science, 128, 2630–2637. doi:https://doi.org/10.1002/app.38317.
   Web of Science ®Google Scholar
• Frazier Parker, J., 1989. A field study of stripping potential of asphalt concrete mixtures. Project Number ST 2019–6. Alabama: Highway Research Center, Auburn University.
   Google Scholar
• Ghuzlan, K.A., Al-Khateeb, G.G., and Qasem, Y., 2013. Rheological properties of polyethylene-modified asphalt binder. Athens Journal of Technology & Engineering, X, 1–14.
   Google Scholar
• Grenfell, J., Apeagyei, A., and Airey, G., 2015. Moisture damage assessment using surface energy, bitumen stripping and the SATS moisture conditioning procedure. International Journal of Pavement Engineering, 16, 411–431. doi:https://doi.org/10.1080/10298436.2015.1007235.
   Web of Science ®Google Scholar
• Halberg, S., 1950. The adhesion of bituminous binder and aggregate in the presence of water. Medd. Statens Vaginst. Stock. Se, 78.
   Google Scholar
• Hattatoglu, F., et al., 2015. Modeling of Marshall Quotient of Hot Mix Asphalts by Artificial Neural Networks. In: 1st International Conf. on Engineering and Natural Sciences (ICENS), 4(1–16).
   Google Scholar
• Hicks RG, E.J., 2000. Life cycle cost analysis of asphalt–rubber paving materials. In: Proc., First International Conf. on the World of Asphalt Pavements, Sydney, Australia, 69–88.
   Google Scholar
• Horgnies, M., et al., 2011. Influence of the interfacial composition on the adhesion between aggregates and bitumen: investigations by EDX, XPS and peel tests. International Journal of Adhesion and Adhesives, 31, 238–247. doi:https://doi.org/10.1016/j.ijadhadh.2011.01.005.
   Web of Science ®Google Scholar
• Huang, Y., Bird, R.N., and Heidrich, O., 2007. A review of the use of recycled solid waste materials in asphalt pavements. Resources, Conservation and Recycling, 52, 58–73. doi:https://doi.org/10.1016/j.resconrec.2007.02.002.
   Web of Science ®Google Scholar
• Hughes, R.I., Lambs, D.R., and Prodes, O., 1960. Adhesion in bitumen macadam. Journal of Applied Chemistry, 10, 433–444. doi:https://doi.org/10.1002/jctb.5010101102.
   Google Scholar
• Jadhav, N., et al., 2009. Glass transition temperature: basics and application in pharmaceutical sector. Asian Journal of Pharmaceutics, 3, 82. doi:https://doi.org/10.4103/0973-8398.55043.
   Google Scholar
• Jan, H., et al., 2017. Performance of hot asphalt mixtures containing plastic bottles as additive. MATEC Web of Conferences, 103, 09006. doi:https://doi.org/10.1051/matecconf/201710309006.
   Google Scholar
• Kaley, K.B., et al., 2006. Health Concerns and Environmental Issues with PVC-Containing Building Materials in Green Buildings.
   Google Scholar
• Kennedy, T.W., Roberts, F.L., and Lee, K.W, 1983. Evaluation of moisture effects on asphalt concrete mixtures. Transportation Research Record, 911, 134–143.
   Google Scholar
• Kiggundu, B.M. and Roberts, F.L., 1988. Stripping in HMA mixtures: state-of-the-art and critical review of test methods. Report 88–2, National center for asphalt Technology. Alabama: Auburn University.
   Google Scholar
• King, G.N. and King, H.W., 1988. Polymer modified bitumen: laboratory evaluation, construction guidelines and field experience. In: Third International Road Federation Middle East Regional Meeting, Riyadh, Saudi Arabia. 1–19.
   Google Scholar
• Kumar, P., Chandra, S., and Bose, S., 2006. Strength characteristics of polymer modified mixes. International Journal of Pavement Engineering, 7, 63–71. doi:https://doi.org/10.1080/10298430500495147.
   Google Scholar
• Lee, D, 1964. The effect of filler on asphalt cement mastics. Ames: Iowa State University, Digital Repository.
   Google Scholar
• Moghaddam, T.B. and Karim, M.R., 2012. Properties of SMA mixtures containing waste polyethylene terephthalate. World Academy of Science, Engineering and Technology, International Journal of Civil, Environmental, Structural, Construction and Architectural Engineering, 6, 170–173.
   Google Scholar
• Nguyen, T., et al., 2017. In Situ spectroscopic study of water at the asphalt/siliceous substrate interface and its implication in stripping. Journal of Adhesion. (Taylor Fr. 8464). doi:https://doi.org/10.1080/00218460590904426.
   Google Scholar
• Pehlivan, D., et al., 2003. Rheological properties of asphalt-plastic blends. Petroleum Science and Technology, 21, 1427–1438. doi:https://doi.org/10.1081/LFT-120023207.
   Web of Science ®Google Scholar
• Prasad, S.K., Manjunath, K.R., and Prasad, K.V.R., 2012. Study on Marshall stability properties of BC Mix used in road construction by adding waste plastic bottles. IOSR Journal of Mechanical and Civil Engineering, 2, 12–23. doi: https://doi.org/10.9790/1684-0221223
   Google Scholar
• Rahaman, M.N., Sobhan, M.A., and Ahmed, T.U., 2012. Effect of waste polyethylene and PVC on the properties of bituminous mixes. In: Proc., 1st International Conf. on Civil Engineering for Sustainable Development (ICCESD), Bangladesh: Shahjalal University of Science & Technology, 189–190.
   Google Scholar
• Rahman, M.N., et al., 2013a. Performance evaluation of waste polyethylene and PVC on Hot asphalt mixtures. American Journal of Civil Engineering, 1, 97–102. doi:https://doi.org/10.12691/ajcea-1-5-2.
   Google Scholar
• Rahman, M.N., et al., 2013b. Experimental behavior of waste polyethylene and PVC on the compressive strength of bituminous mixes. In: The International Conference on Engineering Research, Innovation and Education 2013, SUST, Sylhet, Bangladesh: ICERIE 2013, 248–251.
   Google Scholar
• Rasel, H.M., Rahman, M.N., and Ahmed, T.U., 2011. Study of effects of waste PVC on the properties of bituminous mixes. SAMRIDDHI-A Journal Physical Sciences, Engineering and Technology (S-JPSET), 2, 17–23.
   Google Scholar
• Setiawan, A., Suparma, L.B., and Mulyono, A.T., 2019. Flood water resistance of asphalt concrete by using unconfined compressive strength test. Journal of Physics: Conference Series, 1175, 012022. doi:https://doi.org/10.1088/1742-6596/1175/1/012022.
   Google Scholar
• Shahin, M., 2015. Effect of water on the compressive strength of bituminous mixes. Saarbrü‌‌cken: LAP LAMBERT Academic Publishing.
   Google Scholar
• Singh, P., Tophel, A., and Swamy, A.K., 2017. Properties of asphalt binder and asphalt concrete containing waste polyethylene. Petroleum Science and Technology, 35, 495–500. doi:https://doi.org/10.1080/10916466.2016.1265559.
   Web of Science ®Google Scholar
• Sobhan, M., et al., 2012. Effect of water on the strength of bituminous mixes with waste concrete aggregates. In: Advances in transportation geotechnics 2. CRC Press, 394–399.
   Google Scholar
• Sojobi, A.O., Nwobodo, S.E., and Aladegboye, O.J., 2016. Recycling of polyethylene terephthalate (PET) plastic bottle wastes in bituminous asphaltic concrete. Cogent Engineering, 3, 1–28.
   Web of Science ®Google Scholar
• Sojobi, H.O. and Owamah, H.I., 2014. Evaluation of the suitability of low-density polyethylene (LDPE) waste as fine aggregate in concrete. Nigerian Journal of Technology, 33, 409–425. doi: https://doi.org/10.4314/njt.v33i4.1
   Google Scholar
• Taylor, M.A. and Khosla, N.P., 1983. Stripping of asphalt pavements: state of the art. Transportation Research Record, 911, 150–158.
   Google Scholar
• Terrel, R.L. and AI-Swailmi, S., 1994. SHRP-A-403: water sensitivity of asphalt–aggregate mixes: test selection.
   Google Scholar
• Thelen, E., 1958. Surface energy and adhesion properties in asphalt - aggregate systems. Transportation Research Board, 192, 63–74.
   Google Scholar
• Wilkes, C.E. and Berard, M.T., 2005. PVC Handbook, illustrate. ed. Hanser Verlag.
   Google Scholar
• Wladyslaw Milkowski, 1985. Catalytic modification of road asphalt by polyethylene. Journal of Transportation Engineering, 111, 54–72. doi: https://doi.org/10.1061/(ASCE)0733-947X(1985)111:1(54)
   Google Scholar
• Wong, W., and Li, G., 2009. Analysis of the effect of wax content on bitumen under performance grade classification. Construction and Building Materials, 23, 2504–2510. doi:https://doi.org/10.1016/j.conbuildmat.2009.02.030.
   Web of Science ®Google Scholar
• World Health Organization, 2004. Concise International Chemical Assessment Document 59: ASPHALT (BITUMEN). International Programme on Chemical Safety (IPCS). Geneva: World Health Organization.
   Google Scholar
• Yildirim, Y., 2007. Polymer modified asphalt binders. Construction and Building Materials, 21, 66–72. doi:https://doi.org/10.1016/j.conbuildmat.2005.07.007.
   Web of Science ®Google Scholar
• Yilmaz, A. and Sargin, Ş., 2012. Water effect on deteriorations of asphalt pavements. Online Journal of Science & Technolog, 2, 1–6.
   Google Scholar