404
Views
0
CrossRef citations to date
0
Altmetric
Articles

Crosspave: a multi-layer elastic analysis programme considering stress-dependent and cross-anisotropic behaviour of unbound aggregate pavement layers

, &
Pages 1723-1737 | Received 08 May 2020, Accepted 03 Sep 2020, Published online: 22 Sep 2020

References

  • Allen, J. J., and Thompson, M. R, 1974. Resilient response of granular materials subjected to time-dependent lateral stress. Transportation Research Record: Journal of the Transportation Research Board, 510, 1–13.
  • American Association of State Highway and Transportation Officials (AASHTO), 2008. Mechanistic-empirical pavement design guide: a manual of practice. Washington, D.C.: AASHTO.
  • Austroads, 2019. Guide to pavement technology Part 2: pavement structural design. Autralia: Austroads.
  • Beriha, B., and Sahoo, U.C, 2020. Analysis of flexible pavement with cross-anisotropic material properties. International Journal of Pavement Research and Technology, 13 (4), 411–416. doi: https://doi.org/10.1007/s42947-020-0284-9
  • Biswal, D. R., Sahoo, U.C., and Dash, S R, 2019. Structural response of an inverted pavement with stabilised base by numerical approach considering isotropic and anisotropic properties of unbound layers. Road Materials and Pavement Design, 1–20. doi:https://doi.org/10.1080/14680629.2019.1595701.
  • Brown, S. F., and Pappin, J. W, 1981. Analysis of pavements with granular bases. Transportation Research Record: Journal of the Transportation Research Board, 810, 17–23.
  • Cortes, D. D., Shin, H., and Santamarina, J. C, 2012. Numerical simulation of inverted pavement systems. Journal of Transportation Engineering, 138 (12), 1507–1519. doi: https://doi.org/10.1061/(ASCE)TE.1943-5436.0000472
  • Davids, W.G., Turkiyyah, G.M., and Mahoney, J.P, 1998. EverFE: rigid pavement three-dimensional finite element analysis tool. Transportation Research Record: Journal of the Transportation Research Board, 1629 (1), 41–49. doi: https://doi.org/10.3141/1629-06
  • Dehlen, G. L., and Monismith, C. L, 1970. Effect of nonlinear response material response on the behavior of pavements under traffic. Highway Research Record, 310, 1–16.
  • Erlingsson, S., and Ahmed, A, 2013. Fast layered elastic response program for the analysis of flexible pavement structures. Road Materials and Pavement Design, 14 (1), 196–210. doi: https://doi.org/10.1080/14680629.2012.757558
  • Ghadimi, B., and Nikraz, H, 2017. A comparison of implementation of linear and nonlinear constitutive models in numerical analysis of layered flexible pavement. Road Materials and Pavement Design, 18 (3), 550–572. doi: https://doi.org/10.1080/14680629.2016.1182055
  • Harichandran, R. S., Yeh, M. S., and Baladi, G. Y, 1989. MICH-PAVE: a nonlinear finite element program for analysis of pavements. Transportation Research Record: Journal of the Transportation Research Board, 1286, 123–131.
  • Helwany, S., Dyer, J., and Leidy, J, 1998. Finite-element analyses of flexible pavements. Journal of Transportation Engineering, 124 (5), 491–499. doi: https://doi.org/10.1061/(ASCE)0733-947X(1998)124:5(491)
  • Hicks, R. G., and Monismith, C. L, 1971. Factors influencing the resilient response of granular materials. Highway Research Record, 345, 15–31.
  • Huang, Y. H, 2004. Pavement analysis and design (2nd edn). New Jersey: Pearson Prentice Hall.
  • Indian Roads Congress (IRC), 2018. IRC: 37-2018: guidelines for the design of flexible pavements. New Delhi: The Indian Roads Congress.
  • Khazanovich, L., and Wang, Q. (Chuck), 2007. Mnlayer: high-performance layered elastic analysis program. Transportation Research Record: Journal of the Transportation Research Board, 2037, 63–75. doi: https://doi.org/10.3141/2037-06
  • Kim, S.H., 2004. Determination of Aggregate physical properties and its effect on cross-anisotropic behavior of unbound aggregate materials. Thesis (PhD). Texas A&M University, College Station, TX, USA.
  • Kim, M., Tutumluer, E., and Kwon, J, 2009. Nonlinear pavement foundation modeling for three-dimensional finite-element analysis of flexible pavements. International Journal of Geomechanics, 9 (5), 195–208. doi: https://doi.org/10.1061/(ASCE)1532-3641(2009)9:5(195)
  • Kwon, J., Tutumluer, E., and Al-Qadi, I. L, 2009. Validated mechanistic model for geogrid base reinforced flexible pavements. Journal of Transportation Engineering, 135 (12), 915–926. doi: https://doi.org/10.1061/(ASCE)TE.1943-5436.0000046
  • Lade, P. V., and Nelson, R.B, 1987. Modeling the elastic behavior of granular materials. International Journal for Numerical and Analytical Methods in Geomechanics, 11 (5), 521–542. doi: https://doi.org/10.1002/nag.1610110507
  • Loach, S.C., 1987. Repeated loading of fine grained soils for pavement design. Thesis (PhD). University of Nottingham.
  • Maina, J. W., Kawana, F., and Matsui, K, 2017. Numerical modelling of flexible pavement incorporating cross-anisotropic material properties. Part I: Surface Circular Loading. Journal of the South African Institution of Civil Engineering, 59 (1), 22–27.
  • Mishra, D., 2012. Aggregate characteristics affecting response and performance of unsurfaced pavements on weak subgrades. Thesis (PhD). University of Illinois at Urbana-Champaign.
  • Mishra, D., et al., 2019. Unbound materials characterization for pavement ME Implementation in Idaho. Report No. FHWA-ID19-263, Idaho Transportation Department: Idaho.
  • Raad, L., and Figueroa, J. L, 1980. Load response of transportation support systems. Journal of Transportation Engineering, 106 (1), 111–128.
  • Seed, H. B., et al., 1967. Prediction of flexible pavement deflections from laboratory repeated-load Tests. Washington, D.C: National Research Council.
  • Sivaneswaran, N., Pierce, L., and Mahoney, J., 2001. Everstress Version 5.0: layered elastic analysis program. Olympia, Washington State Department of Transportation.
  • Steyn, W.J.V.D.M., Maina, J.W., and Repsold, A, 2013. Comparison of isotropic and cross-anisotropic analysis of pavement structures. International Journal of Pavement Research and Technology, 6 (4), 336–343.
  • Tarefder, R. A., Ahmed, M. U., and Rahman, A, 2016. Effects of cross-anisotropy and stress-dependency of pavement layers on pavement responses under dynamic truck loading. Journal of Rock Mechanics and Geotechnical Engineering, 8 (3), 366–377. doi: https://doi.org/10.1016/j.jrmge.2016.01.001
  • Theyse, H. L., De Beer, M., and Rust, F. C., 1996. Overview of South African mechanistic pavement design method. Transportation Research Record: Journal of the Transportation Research Board, 1539 (1), 6–17. doi: https://doi.org/10.1177/0361198196153900102
  • Thomson, M. R., and Robnett, Q. L., 1979. Resilient properties of subgrade soils. Transportation Engineering Journal of ASCE, 105 (1), 71–89. doi: https://doi.org/10.1061/TPEJAN.0000772
  • Tutumluer, E., 1995. Predicting behavior of flexible pavements with granular bases. (PhD). dissertation, School of Civil and Environmental Engineering, Georgia Institute of Technology, Atlanta.
  • Uzan, J, 1985. Characterization of granular material. Transportation Research Record: Journal of the Transportation Research Board, 1022 (1), 52–59.
  • Wang, H., and Al-Qadi, I. L, 2013. Importance of nonlinear anisotropic modeling of granular base for predicting maximum viscoelastic pavement responses under moving vehicular loading. Journal of Engineering Mechanics, 139 (1), 29–38. doi: https://doi.org/10.1061/(ASCE)EM.1943-7889.0000465
  • Witczak, M. W., and Uzan, J., 1988. The universal airport pavement design system. Report I of IV: Granular Material Characterization, University of Maryland, College Park.
  • Zhang, Y., et al., 2018. Modeling stress-dependent anisotropic elastoplastic unbound granular base in flexible pavements. Transportation Research Record: Journal of the Transportation Research Board, 2672 (52), 46–56. doi: https://doi.org/10.1177/0361198118758318
  • Zhang, Y., Luo, R., and Lytton, R. L, 2012. Anisotropic viscoelastic properties of undamaged asphalt mixtures. Journal of Transportation Engineering, 138 (1), 75–89. doi: https://doi.org/10.1061/(ASCE)TE.1943-5436.0000302

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.