References
- Abaza, O.A. and Mullin, A.P, 2013. Modeling of pavement deterioration in cold regions. In: 10th International Symposium on Cold Regions Development, 2–5 June 2013, Anchorage, Alaska, USA. Reston, VA: ASCE, 416–427.
- Ahlin, K. and Granlund, N.J, 2002. Relating road roughness and vehicle speeds to human whole body vibration and exposure limits. International Journal of Pavement Engineering, 3 (4), 207–216.
- Alaswadko, N., et al., 2019. Modelling roughness progression of sealed granular pavements: a new approach. International Journal of Pavement Engineering, 20 (2), 222–232.
- Alhasan, A., White, D.J., and De Brabanter, K., 2017. Spatial pavement roughness from stationary laser scanning. International Journal of Pavement Engineering, 18 (1), 83–96.
- Arfken, G.B., Weber, H.J., and Spector, D, 1999. Mathematical methods for physicists, 4th ed. American Journal of Physics, 67 (2), 165–169.
- Bisconsini, D., et al., 2018. Pavement roughness evaluation with smartphones. International Journal of Science and Engineering Investigations, 72, 43–52.
- Bitelli, G., et al., 2012. Laser scanning on road pavements: a new approach for characterizing surface texture. Sensors, 12 (7), 9110–9128.
- Bridgelall, R., Hough, J., and Tolliver, D, 2017. Characterising pavement roughness at non-uniform speeds using connected vehicles. International Journal of Pavement Engineering, 20 (8), 1–7.
- Burdzik, R. and Doleček, R, 2012. Research of vibration distribution in vehicle constructive. Perner’s Contacts, 7 (4), 16–25.
- Cantisani, G. and Loprencipe, G, 2010. Road roughness and whole body vibration: evaluation tools and comfort limits. Journal of Transportation Engineering, 136 (9), 818–826.
- Chen, C.-S., Chou, C.-P., and Chen, A.-C., 2017. viscoelastic model for estimating the international roughness index by smartphone sensors. Presented at the Transportation Research Board 96th Annual MeetingTransportation Research Board.
- Chou, C.-P., et al., 2020. Algorithm for estimating international roughness index by response-based measuring device. Journal of Transportation Engineering, Part B: Pavements, 146 (3), 04020031.
- Do, T.M. and Le, T.C, 2013. Performance analysis of FFT filter to measure displacement signal in road roughness profiler. International Journal of Computer and Electrical Engineering, 5 (4), 356–361.
- Douangphachanh, V. and Oneyama, H., 2013a. Estimation of road roughness condition from smartphones under realistic settings. In: 2013 13th International Conference on ITS Telecommunications (ITST). Presented at the 2013 13th International Conference on ITS Telecommunications (ITST), 433–439.
- Douangphachanh, V. and Oneyama, H., 2013b. Estimation of road roughness condition from smartphones under realistic settings. In: ITS Telecommunications (ITST), 2013 13th International Conference on. IEEE, 433–439.
- Douangphachanh, V. and Oneyama, H., 2014. Exploring the use of smartphone accelerometer and gyroscope to study on the estimation of road surface roughness condition. In: 2014 11th International Conference on Informatics in Control, Automation and Robotics (ICINCO). Presented at the 2014 11th International Conference on Informatics in Control, Automation and Robotics (ICINCO), 783–787.
- Du, Y., Liu, C., and Li, Y, 2018. Velocity control strategies to improve automated vehicle driving comfort. IEEE Intelligent Transportation Systems Magazine, 10 (1), 8–18.
- Du, Y., et al., 2014. Measurement of international roughness index by using-axis accelerometers and GPS. Mathematical Problems in Engineering, 2014, 1–10.
- Grafov, B.M. and Grafova, I.B, 2001. Discrete laplace transformation as a wavelet tool to analyse the electrochemical random time series. Journal of Electroanalytical Chemistry, 502 (1–2), 47–50.
- Hudson, W.R. and Hain, R.C, 1961. Calibration and use of BPR roughometer at the AASHO road test. Highway Research Board Special Report, 66, 19–38.
- Islam, S., et al., 2014. Measurement of pavement roughness using android-based smartphone application. Transportation Research Record: Journal of the Transportation Research Board, 2457, 30–38.
- Janoff, M.S., 1988. National Cooperative Highway Research Program (NCHRP) Report 308: pavement roughness and rideability field evaluation. Transportation Research Board, National Research Council, Washington, DC.
- Jordan, P.G. and Young, J.C, 1980. Developments in the calibration and use of the bump-integrator for ride assessment. Wokingham, Berkshire, UK: Transport and Road Research Laboratory (TRRL).
- Khattak, M.J., et al., 2014. International roughness index models for HMA overlay treatment of flexible and composite pavements. International Journal of Pavement Engineering, 15 (4), 334–344.
- Kırbaş, U, 2018. IRI sensitivity to the influence of surface distress on flexible pavements. Coatings, 8 (8), 271.
- Li, Y., et al., 2020. A novel evaluation method for pavement distress based on impact of ride comfort. International Journal of Pavement Engineering, (early access), 1–13.
- Liu, C., et al., 2020. Eco-based pavement lifecycle maintenance scheduling optimization for equilibrated networks. Transportation Research Part D: Transport and Environment, 86, 102471.
- Loprencipe, G. and Zoccali, P, 2017. Use of generated artificial road profiles in road roughness evaluation. Journal of Modern Transportation, 25 (1), 24–33.
- Mahmoudzadeh, A., et al., 2019. Estimating pavement roughness by fusing color and depth data obtained from an inexpensive RGB-D Sensor. Sensors, 19 (7), 1655.
- McCann, R., and Nguyen, S., 2007. System identification for a model-based observer of a road roughness profiler. In: 2007 IEEE Region 5 Technical Conference. IEEE, 336–343.
- Mohammadi, A., Amador-Jimenez, L., and Elsaid, F, 2019. Simplified pavement performance modeling with only Two-time series observations: a case study of Montreal Island. Journal of Transportation Engineering, Part B: Pavements, 145 (4), 05019004.
- Múčka, P, 2012. Longitudinal road profile spectrum approximation by split straight lines. Journal of Transportation Engineering, 138 (2), 243–251.
- Múčka, P. and Granlund, J, 2012. Is the road quality still better? Journal of Transportation Engineering, 138 (12), 1520–1529.
- Nguyen, T., Lechner, B., and Wong, Y.D, 2019. Response-based methods to measure road surface irregularity: a state-of-the-art review. European Transport Research Review, 11 (1), 43.
- Papagiannakis, A. and Raveendran, B, 1998. International standards organization-compatible index for pavement roughness. Transportation Research Record: Journal of the Transportation Research Board, 1643, 110–115.
- Parhi, K.K. and Ayinala, M, 2013. Low-complexity Welch power spectral density computation. IEEE Transactions on Circuits and Systems I: Regular Papers, 61 (1), 172–182.
- Pérez-Acebo, H., et al., 2019. Rigid pavement performance models by means of Markov Chains with half-year step time. International Journal of Pavement Engineering, 20 (7), 830–843.
- Pérez-Acebo, H., et al., 2020. IRI performance models for flexible pavements in two-lane roads until first maintenance and/or rehabilitation work. Coatings, 10 (2), 97.
- Prasad, J.R., et al., 2013. Development of relationship between roughness (IRI) and visible surface distresses: a study on PMGSY roads. Procedia-Social and Behavioral Sciences, 104, 322–331.
- Rao, S.S. and Yap, F.F, 2011. Mechanical vibrations. Bergen County, NJ: Prentice Hall Upper Saddle River.
- Sathishkumar, P., et al., 2014. Mathematical modeling and simulation quarter car vehicle suspension. International Journal of Innovative Research in Science, Engineering and Technology, 3 (1), 1280–1283.
- Sayers, M.W, 1986. The international road roughness experiment: establishing correlation and a calibration standard for measurements.
- Sayers, M.W. and Karamihas, S.M., 1996. Interpretation of road roughness profile data.
- Sayers, M. and Karamihas, S., 1998. The little book of profiling: basic information about measuring and interpreting road profiles. Ann Arbor: University of Michigan, Transportation Research Institute.
- Sun, L. and Kennedy, T.W, 2002. Spectral analysis and parametric study of stochastic pavement loads. Journal of Engineering Mechanics, 128 (3), 318–327.
- Sun, L., Zhang, Z., and Ruth, J, 2001. Modeling indirect statistics of surface roughness. Journal of Transportation Engineering, 127 (2), 105–111.
- Wei, L. and Fwa, T, 2004. Characterizing road roughness by wavelet transform. Transportation Research Record: Journal of the Transportation Research Board, 1869, 152–158.
- Wei, L., Fwa, T.F., and Zhe, Z, 2005. Wavelet analysis and interpretation of road roughness. Journal of Transportation Engineering, 131 (2), 120–130.
- Yu, J., Chou, E.Y., and Yau, J.-T, 2006. Development of speed-related ride quality thresholds using international roughness index. Transportation Research Record, 1974 (1), 47–53.
- Zamora Alvarez, E.J., et al., 2018. Development of a discrete roughness index for longitudinal road profiles. International Journal of Pavement Engineering, 19 (12), 1043–1052.
- Zeiada, W., et al., 2019. Investigation and modelling of asphalt pavement performance in cold regions. International Journal of Pavement Engineering, 20 (8), 986–997.
- Zhao, B., et al., 2017. Vehicle model calibration in the frequency domain and its application to large-scale IRI estimation. Journal of Disaster Research, 12 (3), 446–455.