References
- AASHTO T 361, 2016. Standard Method of Test for Determining Asphalt Binder Bond Strength by Means of the Binder Bond Strength (BBS) Test.
- Abu Alia, A, 2020. Investigation of the Bond Strength at the Asphalt-Aggregate Interface Using the Binder Bond Strength Device. Master Thesis. Jordan University of Science and Technology.
- Aguiar-Moya, J., et al., 2015. Effect of aging on adhesion properties of asphalt mixtures with the use of Bitumen bond strength and surface energy measurement tests. Transportation Research Record: Journal of the Transportation Research Board, 2505 (1), 57–65. doi:https://doi.org/10.3141/2505-08.
- Ashish, P., and Singh, D, 2019. Use of nanomaterial for asphalt binder and mixtures: a comprehensive review on development, prospect, and challenges. Road Materials and Pavement Design, 1–47. doi:https://doi.org/10.1080/14680629.2019.1634634.
- Ashish, P. K., Singh, D., and Bohm, S, 2017. Investigation on influence of nanoclay addition on rheological performance of asphalt binder. Road Materials and Pavement Design, 18 (5), 1007–1026. doi:https://doi.org/10.1080/14680629.2018.1468802.
- Asif, S., et al., 2018. Study of adhesion characteristics of different bitumen–aggregate combinations using bitumen bond strength test. Journal of the Chinese Institute of Engineers, 41 (5), 430–440. doi:https://doi.org/10.1080/02533839.2018.1490205.
- ASTM D113-17, 2017. Standard test method for ductility of asphalt materials. West Conshohocken, PA: ASTM International. www.astm.org.
- ASTM D2872-19, 2019. Standard test method for effect of heat and Air on a moving film of asphalt (Rolling Thin-film oven test). West Conshohocken, PA: ASTM International. www.astm.org.
- ASTM D36 / D36M-14e1, 2014. Standard test method for softening point of Bitumen (Ring-and-Ball Apparatus). West Conshohocken, PA: ASTM International. www.astm.org.
- ASTM D4402 / D4402M-15, 2015. Standard test method for viscosity determination of asphalt at elevated temperatures using a rotational Viscometer. West Conshohocken, PA: ASTM International. www.astm.org.
- ASTM D4541-17, 2017. Standard test method for pull-off strength of coatings using portable adhesion testers. West Conshohocken, PA: ASTM International. www.astm.org.
- ASTM D6521-19a, 2019. Standard Practice for Accelerated aging of asphalt binder using a pressurized aging Vessel (PAV). West Conshohocken, PA: ASTM International. www.astm.org.
- ASTM D92 – 18, 2019. Standard test method for flash and fire points by Cleveland Open Cup Tester. [online] Astm.org. Available from: https://www.astm.org/Standards/D92.htm [Accessed 20 May 2019].
- Canestrari, F., et al., 2010. Adhesive and cohesive properties of asphalt-aggregate systems Subjected to moisture damage. Road Materials and Pavement Design, 11 (sup1), 11–32. doi:https://doi.org/10.1080/14680629.2010.9690325.
- Canestrari, F., et al., 2013. Rheological properties of bituminous binders with synthetic wax. International Journal of Pavement Research and Technology, 6 (1), 15–21.
- Canestrari, F., et al., 2014. Innovative testing protocol for evaluation of binder-reclaimed aggregate bond strength. Transportation Research Record: Journal of the Transportation Research Board, 2444 (1), 63–70. doi:https://doi.org/10.3141/2444-07.
- Carlson, K.A. and Winquist, J.R., 2016 An introduction to statistics: an active learning approach. Los Angeles, CA: SAGE Publications.
- Chaturabong, P., and Bahia, H, 2016. Effect of moisture on the cohesion of asphalt mastics and bonding with surface of aggregates. Road Materials and Pavement Design, 19 (3), 741–753. doi:https://doi.org/10.1080/14680629.2016.1267659.
- Copeland, A., Youtcheff, J., and Shenoy, A, 2007. Moisture sensitivity of modified asphalt binders. Transportation Research Record: Journal of the Transportation Research Board, 1998 (1), 18–28. doi:https://doi.org/10.3141/1998-03.
- Cui, S., et al., 2014. Durability of asphalt mixtures: effect of aggregate type and adhesion promoters. International Journal of Adhesion and Adhesives, 54, 100–111. doi:https://doi.org/10.1016/j.ijadhadh.2014.05.009.
- Graziani, A., Virgili, A., and Cardone, F, 2018. Testing the bond strength between cold bitumen emulsion composites and aggregate substrate. Materials and Structures, 51 (1), doi:https://doi.org/10.1617/s11527-018-1139-6.
- Habal, A., and Singh, D, 2018. Influence of recycled asphalt pavement on interfacial energy and bond strength of asphalt binder for different types of aggregates. Transportation Research Record: Journal of the Transportation Research Board, 2672 (28), 154–166. doi:https://doi.org/10.1177/0361198118784377.
- Harahsheh, T., 2018. Experimental and statistical evaluation of asphalt binders produced in Jordan treated with different rejuvenators. Master Thesis. Jordan University of Science and Technology.
- Huang, S. C, 2008. Rubber concentrations on rheology of aged asphalt binders. J. Mater. Civ. Eng, 20 (3), 221–229. doi:https://doi.org/10.1061/(ASCE)0899-1561(2008)20:3(221).
- Huang, W., Lv, Q., and Xiao, F, 2016. Investigation of using binder bond strength test to evaluate adhesion and self-healing properties of modified asphalt binders. Construction and Building Materials, 113, 49–56. doi:https://doi.org/10.1016/j.conbuildmat.2016.03.047.
- Ingrassia, L., et al., 2019. Experimental investigation on the bond strength between sustainable road bio-binders and aggregate substrates. Materials and Structures, 52 (4). doi:https://doi.org/10.1617/s11527-019-1381-6.
- Jiménez del Barco Carrión, A., et al., 2019. Intrinsic adhesive and cohesive assessment of the moisture sensitivity of bio-rejuvenated recycled asphalt binders. Road Materials and Pavement Design, 20 (sup1), S347–S364. doi:https://doi.org/10.1080/14680629.2019.1588778.
- Khasawneh, M., et al., 2020. Experimental and statistical evaluation of asphalt binders produced in Jordan treated with different modifiers. Journal of Materials in Civil Engineering, 32 (2), 04019342.
- Moghadas Nejad, F., et al., 2012. Influence of using nonmaterial to reduce the moisture susceptibility of hot mix asphalt. Construction and Building Materials, 31, 384–388. doi:https://doi.org/10.1016/j.conbuildmat.2012.01.004.
- Moraes, R., Velasquez, R., and Bahia, H, 2011. Measuring the effect of moisture on asphalt–aggregate bond with the Bitumen bond strength test. Transportation Research Record: Journal of the Transportation Research Board, 2209 (1), 70–81. doi:https://doi.org/10.3141/2209-09.
- Moraes, R., Velasquez, R., and Bahia, H, 2012. The effect of Bitumen stiffness on the adhesive strength measured by the Bitumen bond strength test. In: 5th Eurasphalt and Eurobitume Congress. doi:https://doi.org/10.13140/RG.2.2.12234.26565.
- Paliukaitė, M., et al., 2016. Evaluation of different test methods for Bitumen adhesion properties. Transportation Research Procedia, 14, 724–731. doi:https://doi.org/10.1016/j.trpro.2016.05.339.
- Pasandín, A., and Pérez, I, 2014. Effects of the asphalt penetration grade and the mineralogical composition on the asphalt-aggregate bond. Petroleum Science and Technology, 32 (22), 2730–2737. doi:https://doi.org/10.1080/10916466.2013.879175.
- Rahim, A., Thom, N., and Airey, G, 2019. Development of compression pull-off test (CPOT) to assess bond strength of bitumen. Construction and Building Materials, 207, 412–421. doi:https://doi.org/10.1016/j.conbuildmat.2019.02.093.
- Singh, B., et al., 2013. Effect of activated crumb rubber on the properties of crumb rubber-modified bitumen. Journal of Applied Polymer Science, 129 (5), 2821–2831. doi:https://doi.org/10.1002/app.38991.
- Taherkhani, H., Afroozi, S., and Javanmard, S, 2017. Comparative study of the effects of Nanosilica and Zyco-Soil Nanomaterials on the properties of asphalt Concrete. Journal of Materials in Civil Engineering, 29 (8), 04017054. doi:https://doi.org/10.1061/(ASCE)MT.1943-5533.0001889.
- Teh, S., and Hamzah, M., 2019. Moisture damage evaluation of asphalt-aggregate constituents and warm mix asphalt using imaging techniques and tensile tests. IOP Conference Series: Materials Science and Engineering, 512, p.012048.
- Yao, H., et al., 2013. Rheological properties and chemical bonding of asphalt modified with nanosilica. Journal of Materials in Civil Engineering, 25 (11), 1619–1630. doi:https://doi.org/10.1061/(ASCE)MT.1943-5533.0000690.
- Zhang, J., Airey, G., and Grenfell, J, 2016. Experimental evaluation of cohesive and adhesive bond strength and fracture energy of bitumen-aggregate systems. Materials and Structures, 49 (7), 2653–2667. doi:https://doi.org/10.1617/s11527-015-0674-7.
- Zhang, J., et al., 2015. Influence of aggregate mineralogical composition on water resistance of aggregate–bitumen adhesion. International Journal of Adhesion and Adhesives, 62, 45–54. doi:https://doi.org/10.1016/j.ijadhadh.2015.06.012.