References
- Al-Khoury, R., et al., 2001a. Spectral element technique for efficient parameter identification of layered media, part ii: inverse calculation. International Journal of Solids and Structures, 38 (48), 8753–8772. doi:https://doi.org/10.1016/S0020-7683(01)00109-3
- Al-Khoury, R., et al., 2001b. Spectral element technique for efficient parameter identification of layered media. I. Forward calculation. International Journal of Solids and Structures, 38 (9), 1605–1623. doi:https://doi.org/10.1016/S0020-7683(00)00112-8
- Al-Khoury, R., et al., 2002. Spectral element technique for efficient parameter identification of layered media. Part iii: viscoelastic aspects. International Journal of Solids and Structures, 39 (8), 2189–2201. doi:https://doi.org/10.1016/S0020-7683(02)00079-3
- Alae, M., et al., 2020. Effects of layer interface conditions on top-down fatigue cracking of asphalt pavements. International Journal of Pavement Engineering, 21 (3), 280–288. Available from: https://doi.org/https://doi.org/10.1080/10298436.2018.1461870.
- Applied Research Associates (ARA), 2004. Guide for mechanistic-empirical design of new and rehabilitated pavement structure. Albuquerque, NM: Council, N.R.
- Asli, C., et al., 2012. Back-calculation of elastic modulus of soil and subgrade from portable falling weight deflectometer measurements. Engineering Structures, 34, 1–7. doi:https://doi.org/10.1016/j.engstruct.2011.10.011
- Cao, D., et al., 2019. Comparisons of asphalt pavement responses computed using layer properties backcalculated from dynamic and static approaches. Road Materials and Pavement Design, 20 (5), 1114–1130. doi:https://doi.org/10.1080/14680629.2018.1436467
- Chatti, K., Ji, Y., and Harichandran, R., 2004. Dynamic time domain backcalculation of layer moduli, damping, and thicknesses in flexible pavements. Transportation Research Record: Journal of the Transportation Research Board, 1869, 106–116. doi:https://doi.org/10.3141/1869-13
- Deng, Y. and Yang, Q., 2019. Rapid evaluation of a transverse crack on a semi-rigid pavement utilising deflection basin data. Road Materials and Pavement Design, 20 (4), 929–942. doi:https://doi.org/10.1080/14680629.2018.1424026
- Dong, Q., Matsui, K., and Yamamoto, K., 2001. Time domain backcalculation of pavement structure material properties using 3d fem with ritz vectors. International Journal of Geomechanics, 1 (3), 325–336. Available from: https://www.tandfonline.com/doi/abs/https://doi.org/10.1080/15323640108500161.
- Fu, G., et al., 2020a. Accuracy evaluation of statically backcalculated layer properties of asphalt pavements from falling weight deflectometer data. Canadian Journal of Civil Engineering, 47 (3), 317–325. doi:https://doi.org/10.1139/cjce-2019-0152
- Fu, G., et al., 2020b. Determination of effective frequency range excited by falling weight deflectometer loading history for asphalt pavement. Construction and Building Materials, 235, 117792. doi:https://doi.org/10.1016/j.conbuildmat.2019.117792
- Huang, Y.H, 2003. Pavement analysis and design. 2nd ed. Englewood Cliffs, NJ: Prentice Hall.
- Kim, Y.R., et al., 1999. Interpretation of fwd data when pavement layers are not intact. Raleigh, North Carolina State: North Carolina State University.
- Kutay, M.E., Chatti, K., and Lei, L., 2011. Backcalculation of dynamic modulus mastercurve from falling weight deflectometer surface deflections. Transportation Research Record: Journal of the Transportation Research Board, 2227 (1), 87–96. doi:https://doi.org/10.3141/2227-10
- Lee, H.S., Ayyala, D., and Von Quintus, H., 2017. Dynamic backcalculation of viscoelastic asphalt properties and master curve construction. Transportation Research Record: Journal of the Transportation Research Board, 2641, 29–38. doi:https://doi.org/10.3141/2641-05
- Lee, Y.C., Kim, Y.R., and Ranjithan, S.R., 1998. Dynamic analysis-based approach to determine flexible pavement layer moduli using deflection basin parameters. Transportation Research Record: Journal of the Transportation Research Board, 1639, 36–42. doi:https://doi.org/10.3141/1639-04
- Li, M., et al., 2017. Finite element modeling and parametric analysis of viscoelastic and nonlinear pavement responses under dynamic fwd loading. Construction and Building Materials, 141, 23–35. doi:https://doi.org/10.1016/j.conbuildmat.2017.02.096
- Li, M. and Wang, H., 2019. Development of ann-ga program for backcalculation of pavement moduli under fwd testing with viscoelastic and nonlinear parameters. International Journal of Pavement Engineering, 20 (4), 490–498. doi:https://doi.org/10.1080/10298436.2017.1309197
- Lin, C., et al., 2006. Analysis and evaluation of transverse-cracked semi-rigid base asphalt pavements using fwd data. In: Geoshanghai International Conference 2006. Shanghai.
- Madsen, S.S. and Levenberg, E., 2018. Dynamic backcalculation with different load-time histories. Road Materials and Pavement Design, 19 (6), 1314–1333.
- Pożarycki, A., Górnaś, P., and Wanatowski, D., 2019. The influence of frequency normalisation of fwd pavement measurements on backcalculated values of stiffness moduli. Road Materials and Pavement Design, 20 (1), 1–19.
- Qiu, X., Luo, X.H., and Yang, Q., 2014a. Influence of cracking damage on deflection basin test data of fwd. Key Engineering Materials, 620, 55–60. doi:https://doi.org/10.4028/www.scientific.net/KEM.620.55
- Qiu, X., Yang, Q., and Wang, F., 2014b. Diagnostic analysis of dynamic deflection for cracked asphalt pavements under fwd impulsive loading. Journal of Vibroengineering, 16 (5), 2426–2437.
- Rabbi, M.F. and Mishra, D., 2021. Using fwd deflection basin parameters for network-level assessment of flexible pavements. International Journal of Pavement Engineering, 22 (2), 147–161.
- Simon, G. and Jean-Marie, K., 2002. Evaluation of the influence of asphalt concrete pavement discontinuities on falling weight deflectometer measurements. In: Proceedings of the 6th Interantional Conference on the Bearing Capacity of Roads and Airfields. Lisbon, 617–627.
- Tarefder, R.A. and Ahmed, M.U., 2014. Modeling of the fwd deflection basin to evaluate airport pavements. International Journal of Geomechanics, 14 (2), 205–213. doi:https://doi.org/10.1061/(ASCE)GM.1943-5622.0000305
- Uddin, W., Zhang, D., and Frenandez, F., 1994. Finite element simulation of pavement discontinuities and dynamic load response. Transportation Research Board: Journal of the Transportation Research Board, 1448, 100–106.
- Varma, S. and Emin Kutay, M., 2016. Backcalculation of viscoelastic and nonlinear flexible pavement layer properties from falling weight deflections. International Journal of Pavement Engineering, 17 (5), 388–402. doi:https://doi.org/10.1080/10298436.2014.993196
- Vrtis, M.C., 2017. Investigation of deflection basins to identify structural distresses within flexible pavements. Auburn, Alabama: Auburn University.
- Wang, H., et al., 2019. Structural assessment of asphalt pavement condition using backcalculated modulus and field data. Construction and Building Materials, 211, 943–951. doi:https://doi.org/10.1016/j.conbuildmat.2019.03.250
- Xie, Z., et al., 2015. Effect of distresses on deflection basins and backcalculation modulus of asphalt pavement with cement-treated base. International Journal of Pavement Research & Technology, 8 (4), 283–288.
- You, L., et al., 2018. Spectral element method for dynamic response of transversely isotropic asphalt pavement under impact load. Road Materials and Pavement Design, 19 (1), 223–238. doi:https://doi.org/10.1080/14680629.2016.1230513
- Zaabar, I., et al., 2014. Backcalculation of asphalt concrete modulus master curve from field-measured falling weight deflectometer data. Transportation Research Record: Journal of the Transportation Research Board, 2457 (1), 80–92. doi:https://doi.org/10.3141/2457-09
- Zhao, Y., et al., 2013. Characterization of linear viscoelastic behavior of asphalt concrete using complex modulus model. Journal of Materials in Civil Engineering, 25 (10), 1543–1548. doi:https://doi.org/10.1061/(ASCE)MT.1943-5533.0000688
- Zhao, Y., Cao, D., and Chen, P., 2015. Dynamic backcalculation of asphalt pavement layer properties using spectral element method. Road Materials and Pavement Design, 16 (4), 870–888. doi:https://doi.org/10.1080/14680629.2015.1056214
- Zhong, X., Zeng, X., and Rose, J., 2002. Shear modulus and damping ratio of rubber-modified asphalt mixes and unsaturated subgrade soils. Journal of Materials in Civil Engineering, 14 (6), 496–502. doi:https://doi.org/10.1061/(ASCE)0899-1561(2002)14:6(496)