Towards the potential usage of eggshell powder as bio-modifier for asphalt binder and mixture: workability and mechanical properties

References

• AASHTO, M, 2012. 19: Performance-graded asphalt binder using multiple stress creep recovery (MSCR) test. American Association of State Highway and Transportation Officials.
   Google Scholar
• AASHTO, T, 2016. 361-16. Standard method of test for determining asphalt binder bond strength by means of the asphalt bond strength (ABS) test. Washington, DC: AASHTO.
   Google Scholar
• Akisetty, C.K., Lee, S.-J., and Amirkhanian, S.N., 2009. Effects of compaction temperature on volumetric properties of rubberized mixes containing warm-mix additives. Journal of Materials in Civil Engineering, 21 (8), 409–415.
   Web of Science ®Google Scholar
• Amu, O., Fajobi, A., and Oke, B., 2005. Effect of eggshell powder on the stabilizing potential of lime on an expansive clay soil. Research Journal of Agriculture and Biological Sciences, 1 (1), 80–84.
   Google Scholar
• Anderson, R.M., 2002. Relationship of superpave gyratory compaction properties to HMA rutting behavior. Washington, DC: Transportation Research Board.
   Google Scholar
• Anderson, R., Christensen, D., and Bonaquist, R., 2003. Estimating the rutting potential of asphalt mixtures using Superpave gyratory compaction properties and indirect tensile strength (with discussion). Journal of the Association of Asphalt Paving Technologists, 72.
   Google Scholar
• ASTM, 2013. Standard specification for viscosity-graded asphalt cement for use in pavement construction.
   Google Scholar
• ASTM, A, 1997a. C127-01: Standard Test Method for Density. Relative Density (Specific Gravity), and Absorption of Coarse Aggregate.
   Google Scholar
• ASTM, A. S. A., 2008. C131/C131M: Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine. ed.
   Google Scholar
• ASTM, C, 1997b. C 88-90, Standard test method for soundness of aggregate by use of sodium sulfate or magnesium sulfate. Annual Book of ASTM Standards, 4, 37–42.
   Google Scholar
• ASTM, D., 1995. Standard test method for determining the percentage of fractured particles in coarse aggregate. Philadelphia: American Society for Testing and Material.
   Google Scholar
• ASTM, D, 2004. 3515: Standard specification hot-mixed, hot laid bituminous paving mixtures. ASTM standards, American Society for Testing and Materials, Pennsylvania.
   Google Scholar
• ASTM, D, 2009. Standard test method for effects of heat and air on asphaltic materials (thin-film oven test). Annual book of ASTM standards, 4.
   Google Scholar
• Bootklad, M. and Kaewtatip, K., 2013. Biodegradation of thermoplastic starch/eggshell powder composites. Carbohydrate Polymers, 97 (2), 315–320.
   PubMed Web of Science ®Google Scholar
• China, M., 2011. Standard test methods of bitumen and bituminous mixtures for highway engineering: JTG E20-2011. China: China Communications Press Beijing.
   Google Scholar
• Cho, Y.-H., et al., 1998. Asphalt overlay design methods for rigid pavements considering rutting, reflection cracking, and fatigue cracking. University of Texas at Austin. Center for Transportation Research. https://rosap.ntl.bts.gov/view/dot/14822
   Google Scholar
• Cree, D. and Rutter, A., 2015. Sustainable bio-inspired limestone eggshell powder for potential industrialized applications. ACS Sustainable Chemistry & Engineering, 3 (5), 941–949.
   Web of Science ®Google Scholar
• D946, A., 2000. Standard specification for penetration-graded asphalt cement for use in pavement construction. ed.
   Google Scholar
• Dan, H.-C., et al., 2020. Meso-scale study on compaction characteristics of asphalt mixtures in Superpave gyratory compaction using SmartRock sensors. Construction and Building Materials, 262, 120874.
   Web of Science ®Google Scholar
• D'Angelo, J.A., 2009. The relationship of the MSCR test to rutting. Road Materials and Pavement Design, 10 (sup1), 61–80.
   Web of Science ®Google Scholar
• Design, S. M., 1996. Superpave Series No. 2 (SP-2). Lexington, KY: Asphalt Institute.
   Google Scholar
• Eme, D. and Nwaobakata, C., 2019. Effect of low density polyethylene as bitumen modifier on some properties of hot mix asphalt. Nigerian Journal of Technology, 38 (1), 1–7.
   Google Scholar
• EN, B, 2003. 12697-22.: Bituminous mixtures test methods for hot Mix asphalt, wheel tracking. European standard. London: British Standard Institution.
   Google Scholar
• Erfen, Y., Tun, U., and Onn, H., 2015. The appropriateness of egg shell as filler in hot mix asphalt. Malásia.
   Google Scholar
• Gao, L., et al., 2014. Influence on compaction of cold recycled mixes with emulsions using the Superpave gyratory compaction. Journal of Materials in Civil Engineering, 26 (11), 04014081.
   Web of Science ®Google Scholar
• Ghosh, P.R., et al., 2016. Progress towards sustainable utilisation and management of food wastes in the global economy. International Journal of Food Science, 2016, 1–22.
   Google Scholar
• Guarin, A., et al., 2016. An extensive laboratory investigation of the use of bio-oil modified bitumen in road construction. Construction and Building Materials, 106, 133-139.
   Web of Science ®Google Scholar
• Hanz, A.J. and Bahia, H.U., 2013. Asphalt binder contribution to mixture workability and application of asphalt lubricity test to estimate compactability temperatures for warm-mix asphalt. Transportation Research Record: Journal of the Transportation Research Board, 2371 (1), 87–95.
   Google Scholar
• Huang, Jiandong, etal, 2020. Predicting the Permeability of Pervious Concrete Based on the Beetle Antennae Search Algorithm and Random Forest Model. Advances in Civil Engineering, 2020, 1–11. http://dx.doi.org/10.1155/2020/8863181.
   Google Scholar
• Huang, J., et al., 2021. Anti-rutting performance of the damping asphalt mixtures (DAMs) made with a high content of asphalt rubber (AR). Construction and Building Materials, 271, 121878.
   Web of Science ®Google Scholar
• Huang, Jiandong, Kumar, G. Shiva, and Sun, Yuantian, 2021. Evaluation of workability and mechanical properties of asphalt binder and mixture modified with waste toner. Construction and Building Materials, 276, 122230. http://dx.doi.org/10.1016/j.conbuildmat.2020.122230.
   Web of Science ®Google Scholar
• Huang, J. and Sun, Y., 2020a. Effect of modifiers on the rutting, moisture-induced damage, and workability properties of hot mix asphalt mixtures. Applied Sciences (Switzerland), 10 (20), 1–16.
   Web of Science ®Google Scholar
• Huang, J. and Sun, Y., 2020b. Effect of modifiers on the rutting, moisture-induced damage, and workability properties of hot mix asphalt mixtures. Applied Sciences, 10 (20), 7145.
   Google Scholar
• Huang, Jiandong, Sun, Yuantian, and Zhang, Junfei, 2021. Reduction of computational error by optimizing SVR kernel coefficients to simulate concrete compressive strength through the use of a human learning optimization algorithm. Engineering with Computers, 35, 1112. http://dx.doi.org/10.1007/s00366-021-01305-x.
   Google Scholar
• Huang, Jiandong and Wang, Qi-Ang, 2021. Influence of crumb rubber particle sizes on rutting, low temperature cracking, fracture, and bond strength properties of asphalt binder. Materials and Structures, 54 (2), http://dx.doi.org/10.1617/s11527-021-01647-4.
   Google Scholar
• Kime, D.E., 1998. Endocrine disruption in fish. New York City: Springer Science & Business Media.
   Google Scholar
• Kumar, G.S. and Suresha, S., 2018. Evaluation of workability and mechanical properties of nonfoaming warm mix asphalt mixtures. Advances in Civil Engineering Materials, 7 (1), 132–157.
   Web of Science ®Google Scholar
• Lee, S.-J., et al., 2007. Laboratory study of the effects of compaction on the volumetric and rutting properties of CRM asphalt mixtures. Journal of Materials in Civil Engineering, 19 (12), 1079–1089.
   Web of Science ®Google Scholar
• Lee, M.-S., Kim, S., and Kim, K.W., 2012. Estimation of optimum compaction temperature for PMA and WMA mixtures by volumetric property evaluation. Journal of Testing and Evaluation, 40 (3), 463–475.
   Web of Science ®Google Scholar
• Leiva, F., and West, R.C., 2008. Analysis of hot-mix asphalt lab compactability using lab compaction parameters and mix characteristics. Transportation Research Record: Journal of the Transportation Research Board, 2057 (1), 89–98.
   Google Scholar
• Li, X., et al., 2016. Characteristics of a surfactant produced warm mix asphalt binder and workability of the mixture. Journal of Testing and Evaluation, 44 (6), 2219–2230.
   Web of Science ®Google Scholar
• Lv, Q., et al., 2019. Investigation of the rutting performance of various modified asphalt mixtures using the Hamburg wheel-tracking device test and multiple stress creep recovery test. Construction and Building Materials, 206, 62–70.
   Web of Science ®Google Scholar
• Lv, S., et al., 2020. Improvements on high-temperature stability, rheology, and stiffness of asphalt binder modified with waste crayfish shell powder. Journal of Cleaner Production, 264, 121745.
   Web of Science ®Google Scholar
• Masued, G.G., 2019. Investigating the ability of using eggshell powder as a filler in hot mix asphalt mixture. ed. IOP Conference Series: Materials Science and Engineering, 022047.
   Google Scholar
• Mo, L., et al., 2012. Laboratory investigation of compaction characteristics and performance of warm mix asphalt containing chemical additives. Construction and Building Materials, 37, 239–247.
   Web of Science ®Google Scholar
• Moghadas Nejad, F., Geraee, E., and Azarhoosh, A.R., 2020. The effect of nano calcium carbonate on the dynamic behaviour of asphalt concrete mixture. European Journal of Environmental and Civil Engineering, 24 (8), 1219–1228.
   Web of Science ®Google Scholar
• Moghaddam, T.B., Karim, M.R., and Abdelaziz, M., 2011. A review on fatigue and rutting performance of asphalt mixes. Scientific Research and Essays, 6 (4), 670–682.
   Google Scholar
• Mohammad, L.N., and Al-Shamsi, K., 2007. A look at the bailey method and locking point concept in superpave mixture design. In: D. L. Miller, M. Walton and Ernest H. Cockrel, eds. Practical approaches to hot-mix asphalt mix design and production quality control testing, 24–32. Washington, DC: Transportation Research Board.
   Google Scholar
• Nciri, N., et al. 2018. Potential of waste oyster shells as a novel biofiller for hot-mix asphalt. Applied Sciences, 8 (3), 415.
   Google Scholar
• Nejres, A.M., Mustafa, Y.F., and Aldewachi, H.S., 2020. Evaluation of natural asphalt properties treated with egg shell waste and low density polyethylene. International Journal of Pavement Engineering, 1–7. https://doi.org/10.1080/10298436.2020.1728534
   Google Scholar
• Notani, M.A., et al., 2020. Rutting resistance of toner-modified asphalt binder and mixture. International Journal of Pavement Research and Technology, 13 (1), 1–9.
   Google Scholar
• Razzaq, A. K. and Yousif, R. A. 2017.  Sustainability of HMA by using of egg shell powder. ICSF 2017 Kingdom of Bahrain, 355.
   Google Scholar
• Reinke, G., et al., 2005. Laboratory investigation of HMA performance using hamburg wheel tracking and DSR torsional creep tests. Journal of ASTM International, 2 (10), 1–32.
   Google Scholar
• Rovenský, J., et al., 2003. Eggshell calcium in the prevention and treatment of osteoporosis. International Journal of Clinical Pharmacology Research, 23 (2-3), 83.
   PubMedGoogle Scholar
• Schaafsma, A., et al., 2000. Mineral, amino acid, and hormonal composition of chicken eggshell powder and the evaluation of its use in human nutrition. Poultry Science, 79 (12), 1833–1838.
   PubMed Web of Science ®Google Scholar
• Stakston, A.D., Bahia, H.U., and Bushek, J.J., 2002. Effect of fine aggregate angularity on compaction and shearing resistance of asphalt mixtures. Transportation Research Record: Journal of the Transportation Research Board, 1789 (1), 14–24.
   Google Scholar
• Stuart, K.D. and Izzo, R.P., 1995. Correlation of superpave G*/Sin delta with rutting susceptibility from laboratory mixture tests (With discussion and closure). Transportation Research Record, 1492, 176–183.
   Google Scholar
• Tsai, W.-T., et al., 2008. Development and characterization of mesoporosity in eggshell ground by planetary ball milling. Microporous and Mesoporous Materials, 111 (1-3), 379–386.
   Web of Science ®Google Scholar
• Waheed, M., et al., 2020. Channelling eggshell waste to valuable and utilizable products: a comprehensive review. Trends in Food Science & Technology, 78–90.
   Web of Science ®Google Scholar
• Walubita, L.F., et al., 2014. HMA shear resistance, permanent deformation, and rutting tests for Texas mixes: final year-2 report. Bryan, Texas: Texas A&M Transportation Institute.
   Google Scholar
• Wang, G., Roque, R., and Morian, D., 2012. Effects of surface rutting on near-surface pavement responses based on a two-dimensional axle-tire-pavement interaction finite-element model. Journal of Materials in Civil Engineering, 24 (11), 1388–1395.
   Web of Science ®Google Scholar
• Yang, X., Mills-Beale, J., and You, Z., 2017. Chemical characterization and oxidative aging of bio-asphalt and its compatibility with petroleum asphalt. Journal of Cleaner Production, 142, 1837–1847.
   Web of Science ®Google Scholar
• Yildirim, Y., and Kennedy, T.W., 2002. Hamburg wheel tracking device results on plant and field cores produced mixtures. Washington, DC: Citeseer.
   Google Scholar
• Yin, F., et al., 2014. Novel method for moisture susceptibility and rutting evaluation using Hamburg wheel tracking test. Transportation Research Record: Journal of the Transportation Research Board, 2446 (1), 1–7.
   Web of Science ®Google Scholar
• Zhang, J., et al., 2015. Use of the MSCR test to characterize the asphalt binder properties relative to HMA rutting performance – A laboratory study. Construction and Building Materials, 94, 218–227.
   Web of Science ®Google Scholar
• Zhang, C., et al., 2016. Compaction characteristics of asphalt mixture with different gradation type through superpave gyratory compaction and X-ray CT scanning. Construction and Building Materials, 129, 243–255.
   Web of Science ®Google Scholar
• Zhang, W., et al., 2017. Prediction model for field rut depth of asphalt pavement based on Hamburg wheel tracking test properties. Journal of Materials in Civil Engineering, 29 (9), 04017098.
   Web of Science ®Google Scholar