Performance evaluation of steel slag high performance concrete for sustainable pavements

References

• Altun, I. A., and Yılmaz, I. s., 2002. Study on steel furnace slags with high MgO as additive in Portland cement. Cement and Concrete Research, 32 (8), 1247–1249.
   Web of Science ®Google Scholar
• Ameri, M., and Behnood, A., 2012. Laboratory studies to investigate the properties of CIR mixes containing steel slag as a substitute for virgin aggregates. Construction and Building Materials, 26 (1), 475–480.
   Web of Science ®Google Scholar
• Amin, M, 2018. Properties of reactive powder concrete incorporating silica fume and rice husk ash. Challenge J Concrete Research Lett, 9, 114–127.
   Google Scholar
• Amin, M. and Tayeh, B. A., 2020. Effect of using mineral admixtures and ceramic wastes as coarse aggregates on properties of ultrahigh-performance concrete. Journal of Cleaner Production, 273, 123073, 1–15.
   Web of Science ®Google Scholar
• Anastasiou, E., Liapis, A., et al., 2015. “Comparative life cycle assessment of concrete road pavements using industrial by-products as alternative materials.” resources. Conservation and Recycling, 101, 1–8.
   Web of Science ®Google Scholar
• Arribas, I., Santamaria, A., et al., 2015. Electric arc furnace slag and its use in hydraulic concrete. Construction and Building Materials, 90, 68–79.
   Web of Science ®Google Scholar
• ASTM, 1999. “ASTM C494: Standard specification for chemical admixtures for concrete.” Annual Book of ASTM Standards International.
   Google Scholar
• ASTM, 2002a. “ASTM C78: Standard test method for flexural strength of concrete (Using simple beam with third-point loading).” Annual Book of ASTM Standards 4 (2).
   Google Scholar
• ASTM, 2002b. “ASTM C469: Standard test method for static modulus of elasticity and Poisson’s ratio of concrete in compression.” Annual Book of ASTM Standards 4: 469.
   Google Scholar
• ASTM, 2003. “ASTM C143: Standard test method for slump of hydraulic cement concrete.” Annual Book of ASTM Standards International.
   Google Scholar
• ASTM, 2004. “ASTM C 496-04. Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens.” Annual Book of ASTM Standards International.
   Google Scholar
• ASTM, 2007. “ASTM C192/C192M Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory.” Annual Book of ASTM Standards International.
   Google Scholar
• ASTM, 2008. “ASTM C157-08 Standard test method for length change of hardened hydraulic-cement mortar and concrete.” Annual Book of ASTM Standards International.
   Google Scholar
• Atahan, H., and Dikme, D., 2011. Use of mineral admixtures for enhanced resistance against sulfate attack. Construction and Building Materials, 25 (8), 3450–3457.
   Web of Science ®Google Scholar
• Awed, A. M., Tarbay, E. W., et al., 2020. Performance characteristics of asphalt mixtures with industrial waste/by-product materials as mineral fillers under static and cyclic loading. Road Materials and Pavement Design, 1–23.
   Web of Science ®Google Scholar
• Bamonte, P., and Gambarova, P. G., 2010. Thermal and mechanical properties at high temperature of a very high-strength durable concrete. Journal of Materials in Civil Engineering, 22 (6), 545–555.
   Web of Science ®Google Scholar
• Barišić, I., Netinger Grubeša, I., et al., 2017. Multidisciplinary approach to the environmental impact of steel slag reused in road construction. Road Materials and Pavement Design, 18 (4), 897–912.
   Web of Science ®Google Scholar
• Behnood, A., and Ameri, M., 2012. Experimental investigation of stone matrix asphalt mixtures containing steel slag. Scientia Iranica, 19 (5), 1214–1219.
   Web of Science ®Google Scholar
• Biskri, Y., Achoura, D., et al., 2017. Mechanical and durability characteristics of high performance concrete containing steel slag and crystalized slag as aggregates. Construction and Building Materials, 150, 167–178.
   Web of Science ®Google Scholar
• Brand, A. S., and Fanijo, E. O., 2020. A review of the influence of steel furnace slag type on the properties of cementitious composites. Applied Sciences, 10 (22), 8210.
   Google Scholar
• Brand, A. S., and Roesler, J. R., 2015. Steel furnace slag aggregate expansion and hardened concrete properties. Cement and Concrete Composites, 60, 1–9.
   Web of Science ®Google Scholar
• Brand, A. S., and Roesler, J. R., 2018. Interfacial transition zone of cement composites with steel furnace slag aggregates. Cement and Concrete Composites, 86, 117–129.
   Web of Science ®Google Scholar
• BS, 2009a. “934-2 “Admixtures for concrete, mortar and grout-part 2: concrete admixtures; definitions, requirements, conformity, marking and labelling”.” British Standards Institution.
   Google Scholar
• BS, 2009b. “12390-8. Testing hardened concrete - part 8: depth of penetration of water under pressure “ British Standards Institution, London.: 1–210.
   Google Scholar
• Büyüköztürk, O., and Lau, D., 2002. High performance concrete: fundamentals and application. Cambridge: Massachusetts Institute of Technology.
   Google Scholar
• Collins, R., Ciesielski, S., et al., 1994. Recycling and use of waste materials and by-products in highway construction: A synthesis of highway practice. Final report, National Research Council, Washington, DC (United States). Transportation … .
   Google Scholar
• Course, P., 2018. “Pennsylvania state university course: solutions to concrete problems-high-strength concrete.” Available from https://www.engr.psu.edu/ce/courses/ce584/concrete/library/concreteprop/highstrengthconcrete/highstrength.html. [Accessed 6 June 2020].
   Google Scholar
• ECCS, 2008. “Egyptian code of practice for design and construction of reinforced concrete structures,.” Ministry of Housing, Utilities & Urban Development, ECP 203-2008 3.
   Google Scholar
• El-Badawy, S., Gabr, A., et al., 2018. Recycled materials and by-products for pavement construction. New York: Springer.
   Google Scholar
• Elgendy, G. M., Elagamy, A. H., et al., 2020. Laboratory evaluation of green concrete mixes containing high percentages of steel slag coarse aggregate. Bulletin of the Faculty of Engineering. Mansoura University, 40 (1), 29–37.
   Google Scholar
• Elshamly, A. F., Abd El-Hakim, R., et al., 2017. Factors affecting accidents risks among truck drivers in Egypt. MATEC Web of Conferences, EDP Sciences.
   Google Scholar
• ESS, 2005. “ESS 2421/2005: Egyptian standard specification, cement – physical and mechanical tests.” Building Research Center, 2007, Cairo, Egypt.
   Google Scholar
• ESS, 2008. “Egyptian organization for standardization & quality 2008, Aggregates for Concrete, ESS 1109, Egypt.” Building Research Center, 2008, Cairo, Egypt.
   Google Scholar
• Ghanbari, M., Abbasi, A. M., et al., 2018. Production of natural and recycled aggregates: the environmental impacts of energy consumption and CO 2 emissions. Journal of Material Cycles and Waste Management, 20 (2), 810–822.
   Web of Science ®Google Scholar
• Ghanbari, M., Monir Abbasi, A., et al., 2017. Economic and environmental evaluation and optimal ratio of natural and recycled aggregate production. Advances in Materials Science and Engineering, 2017, 1–10.
   Web of Science ®Google Scholar
• Guo, X., and Shi, H., 2013. Modification of steel slag powder by mineral admixture and chemical activators to utilize in cement-based materials. Materials and Structures, 46 (8), 1265–1273.
   Web of Science ®Google Scholar
• Han, F., and Zhang, Z., 2018. Properties of 5-year-old concrete containing steel slag powder. Powder Technology, 334, 27–35.
   Web of Science ®Google Scholar
• Hengyan, L. H. W. Y. X., and Wenzhong, Z., 2012. Microstructure analysis of reactive powder concrete after exposed to high temperature. Journal of Huazhong University of Science and Technology (Natural Science Edition).
   Google Scholar
• Jeffrey Stempihar, N., et al., 2020. Assessment of California’s continuously reinforced concrete pavement practice and performance. Transportation Research Record, 2764 (9), 832–842.
   Google Scholar
• Kadri, E.-H., Kenai, S., et al., 2011. Influence of metakaolin and silica fume on the heat of hydration and compressive strength development of mortar. Applied Clay Science, 53 (4), 704–708.
   Web of Science ®Google Scholar
• Kim, S.-H., 2012. Determination of coefficient of thermal expansion for portland cement concrete pavements for MEPDG implementation, Georgia Department of Transportation.
   Google Scholar
• Ley, T., Hajibabaee, A., et al., 2013. Investigation of the inputs for the MEPDG for rigid pavements, Oklahoma Transportation Center.
   Google Scholar
• Li, S., Cheng, S., et al., 2020. Effects of steel slag powder and expansive agent on the properties of ultra-high performance concrete (UHPC): based on a case study. Materials, 13 (3), 683.
   PubMed Web of Science ®Google Scholar
• Li, Y., Kong, F., et al., 2009. Application of high performance concrete mixed with steel slag powder in concrete pavements. In: Yinhai Wang, et al., eds. ICCTP 2009: critical issues In Transportation systems planning, development, and management. Reston, VA: American Society of Civil Engineers, 1–7.
   Google Scholar
• Lin, H., Wang, L., et al., 2008. State of the art on workability and mechanical property of steel slag concrete [J]. Industrial Construction, 38 (S1), 867–869.
   Google Scholar
• Liu, J. and Guo, R., 2018. Applications of steel slag powder and steel slag aggregate in ultra-high performance concrete. Advances in Civil Engineering, 2018, 1–8.
   Web of Science ®Google Scholar
• Liu, J., and Wang, D., 2017. Influence of steel slag-silica fume composite mineral admixture on the properties of concrete. Powder Technology, 320, 230–238.
   Web of Science ®Google Scholar
• Lopez, M., Kahn, L., et al., 2010. High-strength self-curing low-shrinkage concrete for pavement applications. International Journal of Pavement Engineering, 11 (5), 333–342.
   Web of Science ®Google Scholar
• Mallela, J., Abbas, A., et al., 2005. Measurement and significance of the coefficient of thermal expansion of concrete in rigid pavement design. Transportation Research Record, 1919 (1), 38–46.
   Google Scholar
• Maslehuddin, M., Sharif, A. M., et al., 2003. Comparison of properties of steel slag and crushed limestone aggregate concretes. Construction and Building Materials, 17 (2), 105–112.
   Web of Science ®Google Scholar
• McCarthy, L. M., Gudimettla, J. M., et al., 2015. Impacts of variability in coefficient of thermal expansion on predicted concrete pavement performance. Construction and Building Materials, 93, 711–719.
   Web of Science ®Google Scholar
• Mehta, P. K. and Monteiro, P. J., 2014. Concrete: microstructure, properties, and materials. New York: McGraw-Hill Education.
   Google Scholar
• Meng, W., and Khayat, K., 2017. Effects of saturated lightweight sand content on key characteristics of ultra-high-performance concrete. Cement and Concrete Research, 101, 46–54.
   Web of Science ®Google Scholar
• Meng, W., and Khayat, K. H., 2018. Effect of graphite nanoplatelets and carbon nanofibers on rheology, hydration, shrinkage, mechanical properties, and microstructure of UHPC. Cement and Concrete Research, 105, 64–71.
   Web of Science ®Google Scholar
• MEPDG, 2008. Guide, mechanistic–Empirical Pavement Design, interim edition: A manual of practice. Washington, DC: AASHTO.
   Google Scholar
• Montgomery, D., and Wang, G., 1991. Instant-chilled steel slag aggregate in concrete-strength related properties. Cement and Concrete Research, 21 (6), 1083–1091.
   Web of Science ®Google Scholar
• Oluwasola, E. A., Hainin, M. R., et al., 2014. Characteristics and utilization of steel slag in road construction. Jurnal Teknologi, 70, 7.
   Google Scholar
• Özçelik, M, 2018. Energy consumption analysis for natural aggregate processing and its results. Mining of Mineral Deposites, 12 (3), 80–86.
   Web of Science ®Google Scholar
• Pang, B., Zhou, Z., et al., 2016. ITZ properties of concrete with carbonated steel slag aggregate in salty freeze-thaw environment. Construction and Building Materials, 114, 162–171.
   Web of Science ®Google Scholar
• Pasetto, M., and Baldo, N., 2010. Experimental evaluation of high performance base course and road base asphalt concrete with electric arc furnace steel slags. Journal of Hazardous Materials, 181 (1-3), 938–948.
   PubMed Web of Science ®Google Scholar
• PCA, 2019. “Portland cement association, high-strength concrete.” Available from https://www.cement.org/cement-concrete-applications/products/high-strength-concrete [Accessed 6 June 2020].
   Google Scholar
• Peng, Y., Hu, S., et al., 2010. Preparation of reactive powder concrete using fly ash and steel slag powder. Journal of Wuhan University of Technology-Mater. Sci. Ed, 25 (2), 349–354.
   Web of Science ®Google Scholar
• Péra, J., Ambroise, J., et al., 1999. Properties of blast-furnace slags containing high amounts of manganese. Cement and Concrete Research, 29 (2), 171–177.
   Web of Science ®Google Scholar
• Rashad, A. M, 2019. A synopsis manual about recycling steel slag as a cementitious material. Journal of Materials Research and Technology, 8 (5), 4940–4955.
   Google Scholar
• Rohde, L., Peres Núñez, W., et al., 2003. Electric arc furnace steel slag: base material for low-volume roads. Transportation Research Record, 1819 (1), 201–207.
   Google Scholar
• Rosado, L. P., Vitale, P., et al., 2017. Life cycle assessment of natural and mixed recycled aggregate production in Brazil. Journal of Cleaner Production, 151, 634–642.
   Web of Science ®Google Scholar
• Said-Mansour, M., Kadri, E.-H., et al., 2011. Influence of calcined kaolin on mortar properties. Construction and Building Materials, 25 (5), 2275–2282.
   Web of Science ®Google Scholar
• Saylor, A., 2018. “Resources archives: thermal conductivity.” Available from https://resources.saylor.org/wwwresources/archived/site/wp-content/uploads/2011/04/Thermal_conductivity.pdf. [Accessed 29 July 2020].
   Google Scholar
• Shiha, M., El-Badawy, S., et al., 2020. Modeling and performance evaluation of asphalt mixtures and aggregate bases containing steel slag. Construction and Building Materials, 248, 118710.
   Web of Science ®Google Scholar
• Shuguang, H., Yongjia, H., et al., 2006. Effect of fine steel slag powder on the early hydration process of Portland cement. Journal of Wuhan University of Technology-Mater. Sci. Ed, 21 (1), 147–149.
   Web of Science ®Google Scholar
• Sorlini, S., Sanzeni, A., et al., 2012. Reuse of steel slag in bituminous paving mixtures. Journal of Hazardous Materials, 209, 84–91.
   PubMed Web of Science ®Google Scholar
• Tanesi, J., Kutay, M. E., et al., 2007. Effect of coefficient of thermal expansion test variability on concrete pavement performance as predicted by mechanistic-empirical pavement design guide. Transportation Research Record, 2020 (1), 40–44.
   Google Scholar
• Tarbay, E. W., Azam, A. M., et al., 2019. Waste materials and by-products as mineral fillers in asphalt mixtures. Innovative Infrastructure Solutions, 4 (1), 5.
   Web of Science ®Google Scholar
• Wang, G. C, 2016. The utilization of slag in civil infrastructure construction. Cambridge: Woodhead Publishing.
   Google Scholar
• Wang, X., Yu, R., et al., 2019. Optimized design of ultra-high performance concrete (UHPC) with a high wet packing density. Cement and Concrete Research, 126, 105921.
   Web of Science ®Google Scholar
• Wongkeo, W., and Chaipanich, A., 2010. Compressive strength, microstructure and thermal analysis of autoclaved and air cured structural lightweight concrete made with coal bottom ash and silica fume. Materials Science and Engineering: A, 527 (16-17), 3676–3684.
   Web of Science ®Google Scholar
• Wongkeo, W., Thongsanitgarn, P., et al., 2014. Compressive strength and chloride resistance of self-compacting concrete containing high level fly ash and silica fume. Materials & Design, 64, 261–269.
   Web of Science ®Google Scholar
• WSA, 2018. “World steel association (wsa) fact sheet - steel industry co-products.” World Steel Association. Available from https://www.worldsteel.org/en/dam/jcr:1b916a6d-06fd-4e84-b35d-c1d911d18df4/Fact_By-products_2018.pdf [Accessed 29 July 2020].
   Google Scholar
• Yildirim, I. Z. and Prezzi, M., 2011. Chemical, mineralogical, and morphological properties of steel slag. Advances in Civil Engineering, 2011, 1–13.
   Google Scholar
• Yu, F., Wang, X., et al., 2017. Stress-strain relationship of shrinkage compensating steel-slag concrete [J]. Journal of Building Materials, 20 (4), 527–534.
   Google Scholar
• Yuji, W., 1987. “The effect of bond characteristics between steel slag fine aggregate and cement paste on mechanical properties of concrete and mortar.” MRS Online Proceedings Library Archive 113.
   Google Scholar
• Zheng, L., Xuehua, C., et al., 1992. Hydration and setting time of MgO-type expansive cement. Cement and Concrete Research, 22 (1), 1–5.
   Web of Science ®Google Scholar