Viscoelastic characterisation of asphalt concrete under different loading conditions

References

• AASHTO Designation, 2013. AASHTO R 62: Standard practice for developing dynamic modulus master curves for asphalt mixtures.
   Google Scholar
• AASHTO Designation, 2014. AASHTO M 332 : standard specification for performance-graded asphalt binder using multiple stress creep recovery (MSCR) test.
   Google Scholar
• AASHTO Designation, 2015. AASHTO T 342 : Standard method of test for determining dynamic modulus of hot mix asphalt (HMA).
   Google Scholar
• Alavi, M.Z., Hajj, E.Y., and Morian, N.E, 2013. Approach for quantifying the effect of binder oxidative aging on the viscoelastic properties of asphalt mixtures. Transportation Research Record: Journal of the Transportation Research Board, 2373 (1), 109–120.
   Google Scholar
• ARA Inc., 2004. Guide for mechanistic-empirical design of new and rehabilitation pavement structures. NCHRP 1-37A. Champaign, IL: Transportation Research Board of the National Academics.
   Google Scholar
• BS EN 12697-26, 2012. Bituminous mixtures. Test methods for hot mix asphalt. Stiffness.
   Google Scholar
• Christensen, D.W. and Bonaquist, R.F, 2006. Volumetric requirements for superpave mix design. NCHRP Report 567. Washington, DC.: National Cooperative Highway Research Program.
   Google Scholar
• Delaporte, B., et al., 2009. Linear viscoelastic properties of bituminous materials including new products made with ultrafine particles. Road Materials and Pavement Design, 10 (1), 7–38.
   Web of Science ®Google Scholar
• Di Benedetto, H., et al., 2001. Stiffness testing for bituminous mixtures. Materials and Structures, 34, 66–70.
   Web of Science ®Google Scholar
• Di Benedetto, H., Nguyen, Q.T., and Sauzéat, C., 2011. Nonlinearity, heating, fatigue and thixotropy during cyclic loading of asphalt mixtures. Road Materials and Pavement Design, 12 (1), 129–158.
   Web of Science ®Google Scholar
• Forough, S.A., Moghadas Nejad, F., and Khodaii, A, 2016. Comparison of tensile and compressive relaxation modulus of asphalt mixes under various testing conditions. Materials and Structures/Materiaux et Constructions, 49 (1–2), 207–223.
   Web of Science ®Google Scholar
• Gauthier, G., et al., 2010. Non linearity in bituminous materials during cyclic tests. Road Materials and Pavement Design, 11, 379–410.
   Web of Science ®Google Scholar
• Gayte, P., et al., 2016. Influence of transient effects for analysis of complex modulus tests on bituminous mixtures. Road Materials and Pavement Design, 17 (2), 271–289.
   Web of Science ®Google Scholar
• Graziani, A., et al., 2018. Three-dimensional characterisation of linear viscoelastic properties of bituminous mixtures. In: M.N. Partl, L. Porot, H. Di Benedetto, F. Canestrari, P. Marsac, and G. Tebaldi, eds. Testing and characterization of sustainable innovative bituminous materials and systems. Cham: Springer, 75–125.
   Google Scholar
• Graziani, A., et al., 2019. Linear viscoelastic characterisation of bituminous mixtures using random stress excitations. Road Materials and Pavement Design, 20 (S1) (EATA), S390–S408. doi:10.1080/14680629.2019.1587494.
   Google Scholar
• Gudmarsson, A., Ryden, N., and Birgisson, B, 2012. Characterizing the low strain complex modulus of asphalt concrete specimens through optimization of frequency response functions. The Journal of the Acoustical Society of America, 132 (4), 2304–2312.
   PubMed Web of Science ®Google Scholar
• Hao, D. and Li, D, 2015. Determination of dynamic mechanical properties of carbon black filled rubbers at wide frequency range using Havriliak-Negami model. European Journal of Mechanics, A/Solids, 53, 303–310.
   Web of Science ®Google Scholar
• Havriliak, S. and Negami, S, 1966. A complex plane analysis of α-dispersions in some polymer systems. Journal of Polymer Science Part C: Polymer Symposia, 14 (1), 99–117.
   Google Scholar
• Hernandez-Fernandez, N. and Ossa-Lopez, A, 2021. Validation of partial time-temperature superposition principle in thermorheologically complex asphalts. Construction and Building Materials, 276, 122224.
   Web of Science ®Google Scholar
• Khanal, P. and Mamlouk, M, 1995. Tensile versus compressive moduli of asphalt concrete. Transportation Research Record, 1492, 144–150.
   Google Scholar
• Kim, Y.R., Lee, Y.C., and Lee, H.J, 1995. Correspondence principle for characterization of asphalt concrete. Journal of Materials in Civil Engineering, 7 (1), 59–68.
   Web of Science ®Google Scholar
• Lachance-Tremblay, É., et al., 2018. Effect of hydrated lime on linear viscoelastic properties of asphalt mixtures with glass aggregates subjected to freeze-thaw cycles. Construction and Building Materials, 184 (0), 58–67.
   Google Scholar
• Lakes, R.S., 2009. Viscoelastic materials. New York: Cambridge University Press.
   Google Scholar
• Levenberg, E., 2011. Smoothing asphalt concrete complex modulus test data. Journal of Materials in Civil Engineering, 23 (5), 606–611.
   Web of Science ®Google Scholar
• Levenberg, E., 2015. Viscoelastic tension-compression nonlinearity in asphalt concrete. Journal of Materials in Civil Engineering, 1 (9), 1–9.
   Google Scholar
• Levenberg, E. and Shah, A, 2008. Interpretation of complex modulus test results for asphalt-aggregate mixes. Journal of Testing and Evaluation, 36 (4), 101577.
   Web of Science ®Google Scholar
• Levenberg, E. and Uzan, J, 2012. Exposing the nonlinear viscoelastic behavior of asphalt-aggregate mixes. Mechanics of Time-Dependent Materials, 16 (2), 129–143.
   Web of Science ®Google Scholar
• Luo, R. and Lytton, R.L, 2010. Characterization of the tensile viscoelastic properties of an undamaged asphalt mixture. Journal of Transportation Engineering, 136 (3), 173–180.
   Google Scholar
• Lytton, R.L., et al., 1993. Development and validation of performance prediction models and specifications for asphalt binders and paving mixes. Washington, DC: National Research Council. SHRP-A-357.
   Google Scholar
• Lytton, R.L., et al., 2018. Characteristics of damaged asphalt mixtures in tension and compression. International Journal of Pavement Engineering, 19 (3), 292–306.
   Web of Science ®Google Scholar
• Mangiafico, S., et al., 2013. Influence of reclaimed asphalt pavement content on complex modulus of asphalt binder blends and corresponding mixes: experimental results and modelling. Road Materials and Pavement Design, 14 (Suppl. 1), 132–148.
   Google Scholar
• Mangiafico, S., et al., 2018. Nonlinearity of bituminous mixtures. Mechanics of Time-Dependent Materials, 22 (1), 29–49.
   Web of Science ®Google Scholar
• Matteo, C.L., et al., 2008. The modified relaxation time function: A novel analysis technique for relaxation processes. Application to high-temperature molybdenum internal friction peaks. Journal of Nuclear Materials, 377 (2), 370–377.
   Web of Science ®Google Scholar
• Mead, D.W, 1994. Numerical interconversion of linear viscoelastic material functions. Journal of Rheology, 38 (6), 1769–1795.
   Web of Science ®Google Scholar
• Nguyen, H.M., et al., 2009. Time-temperature superposition principle for bituminous mixtures. European Journal of Environmental and Civil Engineering, 13 (9), 1095–1107.
   Web of Science ®Google Scholar
• Nguyen, Q.T., et al., 2017. 3D complex modulus tests on bituminous mixture with sinusoidal loadings in tension and/or compression. Materials and Structures/Materiaux et Constructions, 50, 1.
   Web of Science ®Google Scholar
• Pellinen, T.K. and Witczak, M.W, 2002. Use of stiffness of hot-mix asphalt as a simple performance test. Transportation Research Record, 1789 (1), 80–90.
   Google Scholar
• Roque, R., Birgisson, B., and Kim, J, 2006. Interpreting dissipated energy from complex modulus data. Road Materials and Pavement Design, 7 (2), 223–245.
   Web of Science ®Google Scholar
• Rouleau, L., et al., 2013. Application of kramers-kronig relations to time-temperature superposition for viscoelastic materials. Mechanics of Materials, 65, 66–75.
   Web of Science ®Google Scholar
• Rowe, G.M., et al., 2009. Evaluation of aspects of E * test by using hot-mix asphalt specimens with varying void contents. Transportation Research Record: Journal of the Transportation Research Board, 2127 (1), 164–172.
   Google Scholar
• Sun, Y., Chen, J., and Huang, B, 2015. Characterization of asphalt concrete linear viscoelastic behavior utilizing Havriliak-Negami complex modulus model. Construction and Building Materials, 99, 226–234.
   Web of Science ®Google Scholar
• Swamy, A.K. and Daniel, J.S, 2012. Effect of mode of loading on viscoelastic and damage properties of asphalt concrete. Transportation Research Record: Journal of the Transportation Research Board, 2296 (1), 144–152.
   Google Scholar
• Szabo, J.P. and Keough, I.A, 2002. Method for analysis of dynamic mechanical thermal analysis data using the Havriliak–Negami model. Thermochimica Acta, 392-393, 1–12.
   Web of Science ®Google Scholar
• Tiouajni, S., et al., 2011. Approximation of linear viscoelastic model in the 3 dimensional case with mechanical analogues of finite size. Road Materials and Pavement Design, 12 (4), 897–930.
   Web of Science ®Google Scholar
• Tschoegl, N.W, 1989. The phenomenological theory of linear viscoelastic behavior : an introduction. New York: Springer-Verlag.
   Google Scholar
• Underwood, B. and Kim, Y, 2012. Comprehensive evaluation of small strain viscoelastic behavior of asphalt concrete. Journal of Testing and Evaluation, 40 (4), 622–632.
   Web of Science ®Google Scholar
• Winter, H.H, 1997. Analysis of dynamic mechanical data: inversion into a relaxation time spectrum and consistency check. Journal of Non-Newtonian Fluid Mechanics, 68 (2–3), 225–239.
   Web of Science ®Google Scholar
• Zhang, Y., Luo, R., and Lytton, R.L, 2012. Anisotropic viscoelastic properties of undamaged asphalt mixtures. Journal of Transportation Engineering, 138 (1), 75–89.
   Google Scholar
• Zhao, Y., et al., 2013. Characterization of linear viscoelastic behavior of asphalt concrete using complex modulus model. Journal of Materials in Civil Engineering, 25, 1543–1548.
   Web of Science ®Google Scholar
• Zhao, Y., Ni, Y., and Zeng, W, 2014. A consistent approach for characterising asphalt concrete based on generalised Maxwell or Kelvin model. Road Materials and Pavement Design, 15 (3), 674–690.
   Web of Science ®Google Scholar