A phase field model for damage in asphalt concrete

References

• Ambati, M., Gerasimov, T., and de Lorenzis, L., 2015. A review on phase-field models for brittle fracture and a new fast hybrid formulation. Computational Mechanics, 55, 383–405.
   Web of Science ®Google Scholar
• Baek, J., 2010. Modeling reflective cracking development in hot-mix asphalt overlays and quantification of control technique. Thesis (PhD). University of Illinois at Urbana-Champaign, Champaign, IL.
   Google Scholar
• Baek, J., and Al-Qadi, I.L., 2006. Finite element method modeling of reflective cracking initiation and propagation: investigation of the effect of steel reinforcement interlayer on retarding reflective cracking in hot-mix asphalt overlay. Transportation Research Record: Journal of the Transportation Research Board, 1949, 32–42.
   Google Scholar
• Ban, H., et al., 2017. Laboratory tests and finite element simulations to model thermally induced reflective cracking of composite pavements. International Journal of Pavement Engineering, 18 (6), 1–11.
   Google Scholar
• Bazant, Z.P., and Oh, B., 1983. Crack band theory for fracture of concrete. Materials and Structures, 16, 155–177.
   Google Scholar
• Bodin, D., et al., 2004. A continuum damage approach to asphalt concrete fatigue modelling. ASCE, Journal of Engineering Mechanics, 130 (6), 700–708.
   Web of Science ®Google Scholar
• Bourdin, B., Francfort, G.A., and Marigo, J.J., 2000. Numerical experiments in revisited brittle fracture. Journal of the Mechanics and Physics of Solids, 48 (4), 797–826.
   Web of Science ®Google Scholar
• Bourdin, B., Larsen, C.J., and Richardson, C.L., 2011. A time-discrete model for dynamic fracture based on crack regularization. International Journal of Fracture, 168, 133–143.
   Web of Science ®Google Scholar
• Braham, A., Buttlar, W., and Ni, F., 2010. Laboratory mixed-mode cracking of asphalt concrete using the single-edge notch beam. International Journal of Pavement Engineering, 11 (4), 947–968.
   Google Scholar
• Carvera, M., Barbat, G., and Chiumenti, M., 2017. Finite element modeling o quasi-brittle cracks in 2d and 3d with enhanced strain accuracy. Computational Mechanics, 60 (5), 767–796.
   Web of Science ®Google Scholar
• Chehab, G.R., 2002. Characterization of asphalt concrete in tension using a viscoelastoplastic model. Thesis (PhD). North Carolina State University, Raleigh, NC.
   Google Scholar
• Dave, E.V., et al., 2007. Reflective and thermal cracking modeling of asphalt concrete overlays. In: A. Loizos, T. Scarpas and I. Al-Quadi, eds. Advanced characterisation of pavement and soil engineering materials. London: Taylor & Francis Group.
   Google Scholar
• Dongre, R., Sharma, M.G., and Anderson, D.A., 1989. Development of fracture criterion for asphalt mixes at low temperatures. Transportation Research Record: Journal of the Transportation Research Board, 1228, 94–105.
   Google Scholar
• Elseifi, M.A., et al., 2012. Modeling and evaluation of the cracking resistance of asphalt mixtures using the semi-circular bending test at intermediate temperatures. Road Materials and Pavement Design, 13 (sup1), 124–139.
   Web of Science ®Google Scholar
• Elseifi, M.A., Baek, J., and Dhakal, N., 2018. Review of modelling crack initiation and propagation in flexible pavements using the finite element method. International Journal of Pavement Engineering, 19 (3), 251–263.
   Web of Science ®Google Scholar
• Erdogan, F., and Sih, G., 1963. On the crack extension in plates under plane loading and transverse shear. Journal of Basic Engineering, 85 (4), 519–525.
   Google Scholar
• Francfort, G., and Marigo, J., 1998. Revisiting brittle fracture as an energy minimization problem. Journal of the Mechanics and Physics of Solids, 46 (8), 1319–1342.
   Web of Science ®Google Scholar
• Ghafari, S., and Nejad, F., 2015. R-curve behavior and crack propagation properties of asphalt concrete at low temperatures. Journal of Civil Engineering and Management, 21 (5), 559–570.
   Web of Science ®Google Scholar
• Hansbo, A., and Hansbo, P., 2004. A finite element method for the simulation of strong and weak discontinuities in solid mechanics. Computer Methods in Applied Mechanics and Engineering, 193 (33–35), 3523–3540.
   Web of Science ®Google Scholar
• Hofacker, M., and Miehe, C., 2013. A phase field model of dynamic fracture: robust field updates for the analysis of complex crack patterns. International Journal for Numerical Methods in Engineering, 93, 276–301.
   Web of Science ®Google Scholar
• Hou, Y., 2014. Computational analysis of asphalt binder based on pahse field method. Thesis (PhD). Virgina Polytechnic Institute and State University, Blacksburg, Virgina.
   Google Scholar
• Hou, Y., et al., 2015. Fracture failure in crack interaction of asphalt by using a phase field approach. Materials and Structures, 48, 2997–3008.
   Web of Science ®Google Scholar
• Hou, Y., et al., 2016. Diffuse interface model to investigate the asphalt concrete cracking subjected to shear loading at low temperature. ASCE, Journal of Cold Regions Engineering, 31 (2), 04016009.
   Google Scholar
• Islam, M.R., Vallejo, M.J., and Tarefder, R.A., 2017. Crack propagation in hot mix asphalt overlay using extended finite-element model. ASCE, Journal of Materials in Civil Engineering, 29 (5), 04016296.
   Web of Science ®Google Scholar
• Jenq, Y.S., and Shah, S.P., 1988. Mixed-mode fracture of concrete. International Journal of Fracture, 38, 123–142.
   Web of Science ®Google Scholar
• Kim, H., Wagnor, M.P., and Buttlar, W.G., 2009. Micromechanical fracture modeling of asphalt concrete using a single-edge notched beam test. Materials and Structures, 42, 677–689.
   Web of Science ®Google Scholar
• Kuhn, C., and Muller, R., 2010. A continuum phase field model for fracture. Engineering Fracture Mechanics, 77, 3625–3634.
   Web of Science ®Google Scholar
• Kuhn, C., Schluter, A., and Muller, R., 2015. On degradation functions in phase field fracture models. Computational Materials Science, 108, 374–384.
   Web of Science ®Google Scholar
• Lancaster, I.M., Khalid, H.A., and Kougioumtzoglou, I.A., 2013. Extended fem modelling of crack propagation using the semi-circular bending test. Construction and Building Materials, 48, 270–277.
   Web of Science ®Google Scholar
• Li, X., and Marasteanu, M.O., 2010. The fracture process zone in asphalt misture at low temperature. Engineering Fracture Mechanics, 77 (7), 1175–1190.
   Web of Science ®Google Scholar
• Liu, P., et al., 2019. Numerical simulation of crack propagation in flexible pavements based on cohesive zone model developed from asphalt mixtures. Materials (Basel), 12 (8), 1278.
   PubMed Web of Science ®Google Scholar
• Mahmoud, E., et al., 2014. Extended finite-element modelling of asphalt mixtures fracture properties using the semi-circular bending test. Road Materials and Pavement Design, 15 (1), 153–166.
   Web of Science ®Google Scholar
• Melin, S., 1983. Why do cracks avoid each other?. International Journal of Fracture, 23 (1), 37–45.
   Web of Science ®Google Scholar
• Miehe, C., Hofacker, M., and Welschinger, F., 2010a. A phase field model for rate-independent crack propagation: robust algorithmic implementation based on operator splits. Computer Methods in Applied Mechanics and Engineering, 199 (45–48), 2765–2778.
   Web of Science ®Google Scholar
• Miehe, C., Welschinger, F., and Hofacker, M., 2010b. Thermodynamically consistent phase-field models of fracture: variational principles and multi-field fe implementations. International Journal for Numerical Methods in Engineering, 83, 1273–1311.
   Web of Science ®Google Scholar
• Moes, N., Dolbow, J., and Belytschko, T., 1999. A finite element method for crack growth without remeshing. International Journal for Numerical Methods in Engineering, 46, 131–150.
   Web of Science ®Google Scholar
• Park, S.W., Kim, Y.R., and Scharpery, R.A., 1996. A viscoelastic continuum damage model and its application to uniaxial behavior of asphalt concrete. Mechanics of Materials, 24, 241–255.
   Web of Science ®Google Scholar
• Peerlings, R., et al., 1996. Gradient-enhanced damage for quasi-brittle materials. International Journal for Numerical Methods in Engineering, 3, 331–3404.
   Google Scholar
• Pijaudier-Cabot, G., and Bazant, Z.P., 1987. Nonlocal damage theory. ASCE, Journal of Engineering Mechanics, 113 (10), 1512–1533.
   Web of Science ®Google Scholar
• Pirmohammad, S., and Ayatollahi, M.R., 2014. Fracture resistance of asphalt concrete under different loading modes and temperature conditions. Construction and Building Materials, 53, 235–242.
   Web of Science ®Google Scholar
• Rastegar, R.R., Dave, E.V., and Daniel, J.S., 2018. Fatigue and thermal cracking analysis of asphalt mixtures using continuum-damage and cohesive-zone models. Journal of Transportation Engineering, Part B: Pavements, 144 (4), 04018040.
   Web of Science ®Google Scholar
• Sima, Y., and Wang, F., 1998. A finite element method for a system of growing cracks in heterogenous material. Mechanics of Materials, 28 (1–4), 197–206.
   Web of Science ®Google Scholar
• Soares, J.B., de Freitas, F.A.C., and Allen, D.H., 2003. Crack modeling of asphaltic mixtures considering heterogeneity of the material. In Transportation Research Record: Journal of the Transportation Research Board, No. 1832. Washington, DC: Transportation Research Board of the National Academies, 113–120.
   Google Scholar
• Song, S.H., Paulino, G.H., and Buttlar, W.G., 2006. Simulation of crack propagation in asphalt concrete using an intrinsic cohesive zone model. ASCE, Journal of Engineering Mechanics, 132 (11), 1215–1223.
   Web of Science ®Google Scholar
• Tavergaard, V., 1990. Effect of fiber debonding in a whisker-reinforced metal. Materials Science and Engineering:A, 125 (2), 203–213.
   Web of Science ®Google Scholar
• Underwood, S.B., and Kim, R.Y., 2011. Viscoelasticplastic continuum damage model for asphalt concrete in tension. ASCE, Journal of Engineering Mechanics, 137 (11), 732–739.
   Web of Science ®Google Scholar
• Uzan, J., 2005. Visoelastic-viscoplastic model with damage for asphalt concrete. ASCE, Journal of Materials in Civil Engineering, 17 (5), 528–534.
   Web of Science ®Google Scholar
• Verhoosel, C.V., and de Borst, R., 2013. A phase-field model for cohesive fracture. International Journal for Numerical Methods in Engineering, 96, 43–62.
   Web of Science ®Google Scholar
• Wagnor, M.P., Buttlar, W.G., and Paulino, G.H., 2005. Development of a single-edge notched beam test for asphalt concrete mixtures. Journal of Testing and Evaluation, 33, 452–460.
   Web of Science ®Google Scholar
• Wells, G.N., and Sluys, L.J., 2001. A new method for modelling cohesive cracks using finite elements. International Journal for Numerical Methods in Engineering, 50 (12), 2667–2682.
   Web of Science ®Google Scholar
• Wu, J.Y., 2017. A unified phase-field theory for the mechanics of damage and quasi-brittle failure. Journal of the Mechanics and Physics of Solids, 103, 72–99.
   Web of Science ®Google Scholar
• Wu, J.Y., Huang, Y., and Phu, V.N., 2019. On the bfgs monolithic algorithm for the unified phase field damage theory. Computer Methods in Applied Mechanics and Engineering, 360, 112704.
   Google Scholar
• Wu, J.Y., and Phu, V.N., 2018. A length scale insensitive phase-field damage model for brittle fracture. Journal of the Mechanics and Physics of Solids, 119, 20–42.
   Web of Science ®Google Scholar
• Xiaoge, T., et al., 2018. Simulation of bending fracture process of asphalt mixture semicircular specimen with extended finite element method. Advances in Materials Science and Engineering, 2018, 1–8.
   Web of Science ®Google Scholar
• Xu, X.P., and Needleman, A., 1994. Numerical simulation of fast crack growth in brittle solids. Journal of the Mechanics and Physics of Solids, 42 (9), 1397–1434.
   Web of Science ®Google Scholar
• Zeng, G., et al., 2014. Simulation of damage evolution and crack propagation in three-point bending pre-cracked asphalt mixture beam. Construction and Building Materials, 55, 323–332.
   Web of Science ®Google Scholar
• Zeng, G., et al., 2016. Damage evolution and crack propagation in semicircular bending asphalt mixture specimens. Acta Mechanica Solida Sinica, 29 (6), 596–609.
   Web of Science ®Google Scholar
• Zhu, X.K., and Joyace, J.A., 2009. More accurate approximation of j-integral equation for evaluating fracture resistance curves. Journal of ASTM International, 7 (1), 90–115.
   Google Scholar