Debonding of rubberised fibre-reinforced cement-based repairs under fatigue loading: experimental study and numerical modelling

References

• Adel, M., Matsumoto, K., and Nagai, K., 2021. Crack-bridging degradation and evolution in sfrc structural beams under variable amplitude flexural cyclic loading. Composite Structures, 272, Article ID 114176.
   Web of Science ®Google Scholar
• Ali Gillani, S.A., Toumi, A., and Turatsinze, A., 2020. Cyclic bridging law of steel fibre-reinforced and rubberised cement-based materials. European Journal of Environmental and Civil Engineering, 1–13.
   Web of Science ®Google Scholar
• Atashi, M., Lachemi, M., and Kianoush, M., 2007. Numerical modeling of the behavior of overlaid slab panels for reinforced concrete bridge decks. Engineering Structures, 29 (2), 271–281.
   Web of Science ®Google Scholar
• Balouch, S. and Granju, J.-L., 1999. Corrosion of different types of steel fibres in sfrc and testing of corrosion inhibitors. In: Infrastructure regeneration and rehabilitation improving the quality of life through better construction: a vision for the next millennium 28 June–2 July 1999, Sheffield. 735–747.
   Google Scholar
• Beushausen, H., 2010. The influence of concrete substrate preparation on overlay bond strength. Magazine of Concrete Research, 62 (11), 845–852.
   Web of Science ®Google Scholar
• Bissonnette, B., et al., 2011. Bonded cement-based material overlays for the repair, the lining or the strengthening of slabs or pavements: state-of-the-art report of the rilem technical committee 193-RLS. Vol. 3. Netherlands: Springer Science & Business Media.
   Google Scholar
• Bissonnette, B., Vaysburd, A.M., and von Fay, K.F., 2012. Best practices for preparing concrete surfaces prior to repairs and overlays. Technical report.
   Google Scholar
• BS EN, 2011. Cement, composition, specifications and conformity criteria for common cements. London, England: British Standard Institution (BSI).
   Google Scholar
• Chausson, H., 1997. La durabilité des rechargements minces adhérents en béton renforcé de fibres métalliques. Thesis(PhD). Toulouse 3.
   Google Scholar
• Chen, P.-W., Fu, X., and Chung, D., 1995. Improving the bonding between old and new concrete by adding carbon fibers to the new concrete. Cement and Concrete Research, 25 (3), 491–496.
   Web of Science ®Google Scholar
• Courard, L., Piotrowski, T., and Garbacz, A., 2014. Near-to-surface properties affecting bond strength in concrete repair. Cement and Concrete Composites, 46, 73–80.
   Web of Science ®Google Scholar
• Do, M., 1989. Développement d'un essai de délamination par fatigue. Canada: Université de Sherbooke.
   Google Scholar
• Emmons, P.H., et al., 2000. Durability of repair materials: current practice and challenges. In: International symposium on brittle matrix composites. 263–274.
   Google Scholar
• Farhat, H., 1999. Durabilité des réparations en béton de fibres: effets du retrait et de la fatigue. Thesis(PhD). Toulouse 3.
   Google Scholar
• Fiore, A., et al., 2014. On the fresh/hardened properties of cement composites incorporating rubber particles from recycled tires. Advances in Civil Engineering, 2014, Article ID 876158.
   Google Scholar
• Garbacz, A., Courard, L., and Kostana, K., 2006. Characterization of concrete surface roughness and its relation to adhesion in repair systems. Materials Characterization, 56 (4-5), 281–289.
   Web of Science ®Google Scholar
• Gencturk, B., et al., 2014. Use of digital image correlation technique in full-scale testing of prestressed concrete structures. Measurement, 47, 505–515.
   Web of Science ®Google Scholar
• Gillani, S.A.A., et al., 2017. Fiber-reinforced and rubberized cement-based composite: a sustainable repair material for thin bonded overlays. In: Proceedings of the 9th international civil engineering conference (ICEC-2017) “striving towards resilient built environment”. 143–150.
   Google Scholar
• Gillani, S.A.A., Toumi, A., and Turatsinze, A., 2016. Effect of incorporating rubber aggregates and fiber reinforcement on the durability of thin bonded cement-based overlays. In: 8th RILEM international conference on mechanisms of cracking and debonding in pavements. Springer, 619–625.
   Google Scholar
• Gillani, S.A.A., Toumi, A., and Turatsinze, A., 2020. Effect of surface preparation of substrate on bond tensile strength of thin bonded cement-based overlays. International Journal of Pavement Research and Technology, 13 (2), 197–204.
   Google Scholar
• Grandhaie, F., 1993. Le béton de fibres métalliques amorphes comme nouveau matériau de réparation. Thesis(PhD). Toulouse 3.
   Google Scholar
• Granju, J.-L., 1996. Thin bonded overlays: about the role of fiber reinforcement on the limitation of their debonding. Advanced Cement Based Materials, 4 (1), 21–27.
   Google Scholar
• Granju, J.-L., 2001. Debonding of thin cement-based overlays. Journal of Materials in Civil Engineering, 13 (2), 114–120.
   Web of Science ®Google Scholar
• Hasani, M., et al., 2021. Mechanical and durability properties of fiber reinforced concrete overlay: experimental results and numerical simulation. Construction and Building Materials, 268, Article ID 121083.
   Web of Science ®Google Scholar
• Ho, A.C., et al., 2012. Effects of rubber aggregates from grinded used tyres on the concrete resistance to cracking. Journal of Cleaner Production, 23 (1), 209–215.
   Web of Science ®Google Scholar
• Isla, F., et al., 2015. Mechanical response of fiber reinforced concrete overlays over asphalt concrete substrate: experimental results and numerical simulation. Construction and Building Materials, 93, 1022–1033.
   Web of Science ®Google Scholar
• Langlois, M., et al., 1994. Durability of pavement repairs field experiment. Concrete International, 16 (8), 39–43.
   Google Scholar
• Longbiao, L., 2017. Modeling strength degradation of fiber-reinforced ceramic-matrix composites under cyclic loading at room and elevated temperatures. Materials Science and Engineering: A, 695, 221–229.
   Web of Science ®Google Scholar
• Lupien, C., et al., Avril, 1990. Réhabilitation d'une chaussée en béton avec une chape mince en béton renforcé de fibres d'acier. Les techniques de transport au service de la qualité de vié, Exposé des communications du 25e congrés annuel de l'AQTR, Montréal, pages 108–122.
   Google Scholar
• Mehta, P.K. and Monteiro, P.J., 1986. Concrete: structure, properties and materials. McGraw-Hill Education, 2014.
   Google Scholar
• NF EN 12390-3, 2012. Essais pour béton durci–partie 3: résistance à la compression des éprouvettes [tests for hardened concrete-part 3: compressive strength of the specimens].
   Google Scholar
• Nguyen, T.-H., 2010. Durabilité des réparations à base cimentaire: analyse comparée de l'influence des propriétés mécaniques du matériau de réparation. Thesis(PhD). Université de Toulouse, Université Toulouse III-Paul Sabatier.
   Google Scholar
• Nguyen, T.-H., et al., 2012. Restrained shrinkage cracking in steel fibre reinforced and rubberised cement-based mortars. Materials and Structures, 45 (6), 899–904.
   Web of Science ®Google Scholar
• Nguyen, T.-H., Toumi, A., and Turatsinze, A., 2010. Mechanical properties of steel fibre reinforced and rubberised cement-based mortars. Materials & Design, 31 (1), 641–647.
   Web of Science ®Google Scholar
• Pickerd, V., 2013. Optimisation and validation of the aramis digital image correlation system for use in large-scale high-strain-rate events. Technical report. Defense science and technology organization Victoria(Australia) Maritime Platforms Div.
   Google Scholar
• Rilem, T., 1972. Cpc 8 modulus of elasticity of concrete in compression. Materials and Structures, 6, 507–512.
   Google Scholar
• Rossi, P., 1998. Les bétons de fibres métalliques. Ed. Techniques Ingénieur France.
   Google Scholar
• Sabah, S.A., et al., 2019. Bond strength of the interface between normal concrete substrate and gusmrc repair material overlay. Construction and Building Materials, 216, 261–271.
   Web of Science ®Google Scholar
• Shen, Q., et al., 2019. Fatigue strengthening of carbon/carbon composites modified with carbon nanotubes and silicon carbide nanowires. International Journal of Fatigue, 124, 411–421.
   Web of Science ®Google Scholar
• Silfwerbrand, J., 1990. Improving concrete bond in repaired bridge decks. Concrete International, 12 (9), 61–66.
   Google Scholar
• Toumi, A., Nguyen, T.-H., and Turatsinze, A., 2013a. Benefits of low modulus of elasticity and of fibre reinforcement of cement based mortars as thin bonded overlay materials. Experimental Mechanics, 53 (9), 1791–1797.
   Web of Science ®Google Scholar
• Toumi, A., Nguyen, T.-H., and Turatsinze, A., 2013b. Debonding of a thin rubberised and fibre-reinforced cement-based repairs: analytical and experimental study. Materials & Design, 49, 90–95.
   Web of Science ®Google Scholar
• Toumi, A., Nguyen, T.-H., and Turatsinze, A., 2015. Modelling of the debonding of steel fibre reinforced and rubberised cement-based overlays under fatigue loading. European Journal of Environmental and Civil Engineering, 19 (6), 672–686.
   Web of Science ®Google Scholar
• Tran, Q.T., 2006. Interface ancien-nouveau béton: caractérisation du comportement adoucissant de l'interface au cours de décollement et son évolution dans le cas de sollicitation de fatigue. Thesis(PhD). Toulouse 3.
   Google Scholar
• Tran, Q.T., Toumi, A., and Granju, J.-L., 2006. Experimental and numerical investigation of the debonding interface between an old concrete and an overlay. Materials and Structures, 39 (3), 379–389.
   Web of Science ®Google Scholar
• Tran, Q.T., Toumi, A., and Turatsinze, A., 2007. Modelling of debonding between old concrete and overlay: fatigue loading and delayed effects. Materials and Structures, 40 (10), 1045–1059.
   Web of Science ®Google Scholar
• TS EN, 2002. Methods of testing cement-part: 1.
   Google Scholar
• Turatsinze, A., Bonnet, S., and Granju, J.-L., 2005. Mechanical characterisation of cement-based mortar incorporating rubber aggregates from recycled worn tyres. Building and Environment, 40 (2), 221–226.
   Web of Science ®Google Scholar
• Van Breugel, K., 2007. Is there a market for self-healing cement-based materials. In: Proceedings of the first international conference on self-healing materials. 1–9.
   Google Scholar
• Vandewalle, L., et al., 2001. Rilem tc 162-tdf: test and design methods for steel fibre reinforced concrete: uni-axial tension test for steel fibre reinforced concrete. Materials and Structures/Materiaux et Constructions, 34 (235), 3–6.
   Web of Science ®Google Scholar
• Zhang, J., Stang, H., and Li, V., 1999. Fatigue life prediction of fiber reinforced concrete under flexural load. International Journal of Fatigue, 21 (10), 1033–1049.
   Web of Science ®Google Scholar