Characterisation of foam bitumen mixes with diffrent RAP content at elevated mixing temperature using design of experiment (DOE) approach

References

• Abreu, L.P., et al., 2017. Suitability of different foamed bitumen for warm mix asphalt with increasing recycling rates. Construction and Building Materials, 142, 342–353.
   Web of Science ®Google Scholar
• Arefin, M.S., et al., 2018. Effect of short-term and long-term aging on the dynamic modulus of foamed warm mix asphalt. International Journal of Pavement Engineering, 21 (4), 1–13.
   Web of Science ®Google Scholar
• Asphalt Academy, Technical Guidelines (TG-2), 2009. Technical guideline: Bitumen stabilised materials, a guideline for the design and construction of bitumen emulsion and foamed bitumen stabilised materialsCape Town.
   Google Scholar
• Asphalt Academy, Technical Guidelines (TG-2), 2020 August. The design and use of foamed bitumen treated materials (3rd ed). Pretoria: CSIR.
   Google Scholar
• ASTM D2127-19, 2019. Standard test method for water absorption of rigid cellular plastics. West Conshohocken, PA: ASTM International.
   Google Scholar
• Bairgi, B.K., Mannan, U.A., and Tarefder, R.A., 2019. Influence of foaming on tribological and rheological characteristics of foamed asphalt. Construction and Building Materials, 205, 186–195.
   Web of Science ®Google Scholar
• Bala, N., Napiah, M., and Kamaruddin, I., 2020. Nanosilica composite asphalt mixtures performance-based design and optimisation using response surface methodology. International Journal of Pavement Engineering, 21 (1), 29–40.
   Web of Science ®Google Scholar
• Betti, G., et al., 2017. Active fillers’ effect on in situ performances of foam bitumen recycled mixtures. Road Mater. Pavement, 18 (2), 281–296.
   Web of Science ®Google Scholar
• Cheng, P., et al., 2020. Influence factors of strength and performance of foamed asphalt cold recycled mixture. Road Materials and Pavement Design, 1–16.
   Web of Science ®Google Scholar
• Chomicz-Kowalska, A., and Ramiączek, P., 2017. Comparative evaluation and modification of laboratory compaction methods of road base mixtures manufactured in low-emission CIR technology with foamed bitumen and bitumen emulsion. Procedia Engineering, 172, 560–569.
   Google Scholar
• Csanyi, L.H, 1957. Foamed asphalt in bituminous paving mixtures. Highway Research Board Bulletin, (160) Júnior, J.L.L., Babadopulos, L.F. and Soares, J.B., 2019. Moisture-induced damage resistance, stiffness and fatigue life of asphalt mixtures with different aggregate-binder adhesion properties. Construction and Building Materials, 216, 166–175.
   Google Scholar
• De Lira, R.R., Cortes, D.D., and Pasten, C., 2015. Reclaimed asphalt binder aging and its implications in the management of RAP stockpiles. Construction and Building Materials, 101, 611–616.
   Web of Science ®Google Scholar
• Derringer, G., and Suich, R., 1980. Simultaneous optimization of several response variables. Journal of Quality Technology, 12 (4), 214–219.
   Web of Science ®Google Scholar
• Dong, F., et al., 2017. Comparison of high temperature performance and microstructure for foamed WMA and HMA with RAP binder. Construction and Building Materials, 134, 594–601.
   Web of Science ®Google Scholar
• EN 12697-25, 2016. Bituminous mixtures test methods for hot mix asphalt, Part 25: Cyclic compression test. British Standard.
   Google Scholar
• Erten, K.M., Terzi, S., and Akbulut, H., 2020. Effect of active filler ratio on indirect tensile strenght of foam bituminous mixtures. International Scientific and Vocational Studies Journal, 4 (1), 60–67.
   Google Scholar
• Guatimosim, F.V., et al., 2018. Laboratory and field evaluation of cold recycling mixture with foamed asphalt. Road Materials and Pavement Design, 19 (2), 385–399.
   Web of Science ®Google Scholar
• Halles, F.A., and Thenoux, G.Z., 2009. Degree of influence of active fillers on properties of recycled mixes with foamed asphalt. Transportation Research Record: Journal of the Transportation Research Board, 2095, 127–135. DOI: 10.3141/2095-13.
   Google Scholar
• Hamzah, M.O., Golchin, B., and Tye, C.T., 2013. Determination of the optimum binder content of warm mix asphalt incorporating rediset using response surface method. Construction and Building Materials, 47, 1328–1336.
   Web of Science ®Google Scholar
• Hamzah, M.O., Gungat, L., and Golchin, B., 2017. Estimation of optimum binder content of recycled asphalt incorporating a wax warm additive using response surface method. International Journal of Pavement Engineering, 18 (8), 682–692.
   Web of Science ®Google Scholar
• Harrell Jr, F.E., Lee, K.L., and Mark, D.B., 1996. Multivariable prognostic models: issues in developing models, evaluating assumptions and adequacy, and measuring and reducing errors. Statistics in Medicine, 15 (4), 361–387.
   PubMed Web of Science ®Google Scholar
• Harrington, E.C., 1965. The desirability function. Industrial Quality Control, 21 (10), 494–498.
   Google Scholar
• Hasan, M.R.M., et al., 2019. Characterizations of foamed asphalt binders prepared using combinations of physical and chemical foaming agents. Construction and Building Materials, 204, 94–104.
   Web of Science ®Google Scholar
• He, G.P., and Wong, W.G., 2006. Decay properties of the foamed bitumen. Construction and Building Materials, 20 (10), 866–877.
   Web of Science ®Google Scholar
• He, G.P., and Wong, W.G., 2008. Effects of moisture on strength and permanent deformation of foamed asphalt mix incorporating RAP materials. Construction and Building Materials, 22 (1), 30–40.
   Web of Science ®Google Scholar
• Hou, Y., et al., 2019. Dynamic characteristics of warm mix foamed asphalt mixture in seasonal frozen area. Advances in Materials Science and Engineering, 2019, 1–12.
   Web of Science ®Google Scholar
• Hoy, M., Horpibulsuk, S., and Arulrajah, A., 2016. Strength development of recycled asphalt pavement–fly ash geopolymer as a road construction material. Construction and Building Materials, 117, 209–219.
   Web of Science ®Google Scholar
• Indian Road Congress 120, 2015. Recommended practice for recycling of bituminous pavement. New Delhi, India: IRC.
   Google Scholar
• Iwański, M.M., Chomicz-Kowalska, A., and Maciejewski, K., 2020. Resistance to moisture-induced damage of half-warm-mix asphalt concrete with foamed bitumen. Materials, 13 (3), 654.
   PubMed Web of Science ®Google Scholar
• Júnior, J.L.L., Babadopulos, L.F., and Soares, J.B, 2019. Moisture-induced damage resistance, stiffness and fatigue life of asphalt mixtures with different aggregate-binder adhesion properties. Construction and Building Materials, 216, 166–175.
   Web of Science ®Google Scholar
• Kar, S.S., et al., 2017a. Development of response surface model for mechanical properties of foamed bitumen mixtures. International Conference on Advances in Construction Materials and Systems, Vol. 4.
   Google Scholar
• Kar, S.S., et al., 2017b. Impact of binder on properties of foamed bituminous mixtures. Proceedings of the Institution of Civil Engineers-Construction Materials, 170 (4), 194–204.
   Web of Science ®Google Scholar
• Kar, S.S., et al., 2017c. A critical review on foam and emulsion based cold recycled asphalt mixes. Indian Highways, 45, 8.
   Google Scholar
• Kar, S.S., et al., 2018. Impact of low viscosity grade bitumen on foaming characteristics. Journal of the South African Institution of Civil Engineering, 60 (2), 40–52.
   Web of Science ®Google Scholar
• Kar, S.S., et al., 2020a. Impact of chemical composition on foaming characteristics of asphalt binder. Journal of Transportation engineering. Part B: Pavements, 146 (3), 04020045.
   Google Scholar
• Kar, S.S., Chandra, S., and Nagabhushana, M.N. 2020b. Mix design approach of cold mix asphalt using response surface method. In: A. Kumar, A.T. Papagiannakis, and A. Bhasin, D. Little, eds. Advances in materials and pavement performance prediction II. CRC Press, 282–286.
   Google Scholar
• Kavussi, A., and Motevalizadeh, S., 2020. Foamed warm mix asphalt mix design using response surface method. Journal of Transportation Research.
   Google Scholar
• Khodaii, A., et al., 2016. Identification of dominant parameters for stripping potential in warm mix asphalt using response surface methodology. Materials and Structures, 49 (6), 2425–2437.
   Web of Science ®Google Scholar
• Klein, T., Buhr, E., and Frase, C. G, 2012. TSEM: A review of scanning electron microscopy in transmission mode and its applications. Advances in Imaging and Electron Physics, 171, 297–356.
   Google Scholar
• Kushwaha, P., and Swami, B.L., 2019. A study on moisture susceptibility of foamed bitumen mix containing reclaimed asphalt pavement. Transportation Infrastructure Geotechnology, 6 (2), 89–104.
   Google Scholar
• Li, Z., et al., 2019. Effect of cement on the strength and microcosmic characteristics of cold recycled mixtures using foamed asphalt. Journal of Cleaner Production, 230, 956–965.
   Web of Science ®Google Scholar
• Li, J., Fu, W., and Zang, H., 2018. Design method for proportion of cement-foamed asphalt cold recycled mixture. MATEC Web of Conferences (Vol. 142). EDP Sciences.
   Google Scholar
• Ministry of Road Transport and Highways (MoRTH), 2013. Specifications for road and bridge works. New Delhi: Indian Roads Congress.
   Google Scholar
• Modarres, A., and Ayar, P., 2016. Comparing the mechanical properties of cold recycled mixture containing coal waste additive and ordinary Portland cement. International Journal of Pavement Engineering, 17 (3), 211–224.
   Web of Science ®Google Scholar
• Montgomery, D.C., 2012. Statistical quality control. Arizona: Wiley Global Education.
   Google Scholar
• Mtarfi, N.H., et al., 2017. Effect of fly ash and grading agent on the properties of mortar using response surface methodology. Journal of Building Engineering, 9, 109–116.
   Web of Science ®Google Scholar
• Mukherjee, A., Banerjee, S., and Halder, G., 2018. Parametric optimization of delignification of rice straw through central composite design approach towards application in grafting. Journal of Advanced Research, 14, 11–23.
   PubMed Web of Science ®Google Scholar
• Nassar, A.I., Thom, N., and Parry, T., 2016. Optimizing the mix design of cold bitumen emulsion mixtures using response surface methodology. Construction and Building Materials, 104, 216–229.
   Web of Science ®Google Scholar
• Nivedya, M.K., et al., 2018. Investigation on the influence of air voids and active filler on the mechanical response of bitumen stabilized material. Journal of Materials in Civil Engineering, 30 (3), 04017293.
   Web of Science ®Google Scholar
• Noordin, M.Y., et al., 2004. Application of response surface methodology in describing the performance of coated carbide tools when turning AISI 1045 steel. Journal of Materials Processing Technology, 145 (1), 46–58.
   Web of Science ®Google Scholar
• Rafiq, W., et al., 2021. Modeling and design optimization of reclaimed asphalt pavement containing crude palm oil using response surface methodology. Construction and Building Materials, 291, 123288.
   Web of Science ®Google Scholar
• Romeo, E., et al., 2018. Effect of active fillers on cracking performance of bitumen-stabilised materials. Road Mater. Pavement, 19 (7), 1563–1574.
   Web of Science ®Google Scholar
• Sánchez, D.B., et al., 2019. Effect of foaming technique and mixing temperature on the rheological characteristics of fine RAP-foamed bitumen mixtures. Road Materials and Pavement Design, 21 (28), 1–17.
   Google Scholar
• Seferoğlu, A.G., Seferoğlu, M.T., and Akpınar, M.V., 2018. Investigation of the effect of recycled asphalt pavement material on permeability and bearing capacity in the base layer. Advances in Civil Engineering, 2018, 1–6.
   Web of Science ®Google Scholar
• Skotnicki, L., Kuzniewski, J., and Szydlo, A., 2020. Stiffness Identification of foamed asphalt mixtures with cement, evaluated in laboratory and in situ in road pavements. Materials, 13 (5), 1128.
   PubMed Web of Science ®Google Scholar
• Skotnicki, Ł., Kuźniewski, J., and Szydło, A., 2021. Research on the properties of mineral–cement emulsion mixtures using recycled Road pavement materials. Materials, 14 (3), 563.
   PubMed Web of Science ®Google Scholar
• Swaroopa, S., Sravani, A. and Jain, P.K., 2015. Comparison of mechanistic characteristics of cold, mild warm and half warm mixes for bituminous road construction. Indian Journal of Engineering and Material Science, 22, 85–92.
   Web of Science ®Google Scholar
• Taherkhani, H., and Noorian, F., 2020. Investigating permanent deformation of recycled asphalt concrete containing waste oils as rejuvenator using response surface methodology (RSM). Iranian Journal of Science and Technology, Transactions of Civil Engineering, 45, 1989–2001.
   Web of Science ®Google Scholar
• Tan, Y., et al., 2013. Performance optimization method of composite modified asphalt sealant. Journal of Highway and Transportation Research and Development (English Edition), 7 (2), 1–7.
   Google Scholar
• Taziani, E.A., et al., 2016. Investigation on the combined effect of fibers and cement on the mechanical performance of foamed bitumen mixtures containing 100% RAP. Advances in Materials Science and Engineering, 2016, Article ID 4894351. https://doi.org/10.1155/2016/4894351.
   Web of Science ®Google Scholar
• Wirtgen, F., 2004. Cold recycling manual (2nd ed.). Windhagen: Wirtgen GmbH.
   Google Scholar
• Zhu, J., et al., 2020. Experimental study of high modulus asphalt mixture containing reclaimed asphalt pavement. Journal of Cleaner Production, 263, 121447.
   Web of Science ®Google Scholar