A method to evaluate the tensile strength and ductility of asphalt binders using a thin confined filmFootnote

* Preprint submitted to International Journal of Pavement Engineering

References

• Asp, L.E., Berglund, L.A., and Gudmundson, P., 1995. Effects of a composite-like stress state on the fracture of epoxies. Composites Science and Technology, 53 (1), 27–37.
   Web of Science ®Google Scholar
• ASTM D1856, D. 2015. Standard test method for recovery of asphalt from solution by Abson method. USA: Annual Book of ASTM Standards.
   Google Scholar
• Bhasin, A., et al., 2021. Parts and sample preparation guide for the poker chip or asphalt ductility test. Available from: https://doi.org/10.18738/T8/KTCNVK
   Google Scholar
• Chang, W., 1994. Application of acoustic emission to study the cohesive and adhesive strength of asphalt. Washington, DC: Strategic Highway Research Program Report SHRP-A-682.
   Google Scholar
• Clark, R., 1958. Practical results of asphalt hardening on pavement life. Journal of the Association of Asphalt Paving Technologists, 27, 196–208.
   Google Scholar
• Diak, E., Beier, E., and Hesp, S.A., 2020. Development of a butt joint test for the ductile performance grading of asphalt binders. Construction and Building Materials, 243 (3), 118195.
   Google Scholar
• Filonzi, A., et al., 2020. Investigating the use of a binder cohesion test to evaluate cracking resistance of asphalt mixtures. In: RILEM International Symposium on Bituminous Materials, 12, Lyon, France: Springer.
   Google Scholar
• Hajj, R., et al., 2017. Evaluation of stiffness, strength, and ductility of asphalt binders at intermediate temperature. Transportation Research Record: Journal of the Transportation Research Board, 2632 (1), 44–51.
   Google Scholar
• Hajj, R., and Bhasin, A., 2018. The search for a measure of fatigue cracking in asphalt binders–a review of different approaches. International Journal of Pavement Engineering, 19 (3), 205–219.
   Web of Science ®Google Scholar
• Hajj, R., and Bhasin, A., 2020. Importance of triaxial stress state on asphalt binder tensile failure. In: A.T. Papagainnakis, A. Bhasin, A. Kumar and D.N. Little, eds. Proc. of advances in materials and pavement performance prediction AM3P, 8, San Antonio, TX: Balkema.
   Google Scholar
• Hammoum, F., et al., 2009. Experimental and numerical analysis of crack initiation and growth in thin film of bitumen. Road Materials and Pavement Design, 10 (1), 39–61. Available from: http://www.tandfonline.com/doi/abs/10.1080/14680629.2009.9690
   Web of Science ®Google Scholar
• Harvey, J.A., and Cebon, D., 2003. Failure mechanisms in viscoelastic films. Journal of Materials Science, 38 (5), 1021–1032. Available from: https://link.springer.com/article/10.1023/A:1022345713409
   Web of Science ®Google Scholar
• Katnam, K.B., et al., 2012. Investigating tensile behaviour of toughened epoxy paste adhesives using circumferentially notched cylindrical bulk specimens. In: International journal of adhesion and adhesives, 9. Elsevier, Vol. 37, 3–10.
   Google Scholar
• Kim, Y.R., Lee, H.J., and Little, D.N., 1997. Fatigue characterization of asphalt concrete using viscoelaticity and continuum damage theory. Journal of the Association of Asphalt Paving Technologist, 66, 520–569.
   Google Scholar
• Kishi, H., et al., 1998. Ductility and toughenability study of epoxy resins under multiaxial stress states. Journal of Materials Science, 33 (13), 3479–3488. Available from: https://link.springer.com/article/10.1023/A:1013222421843
   Web of Science ®Google Scholar
• Kody, R.S., and Lesser, A.J., 1997. Deformation and yield of epoxy networks in constrained states of stress. Journal of Materials Science, 32 (21), 5637–5643. Available from: https://link.springer.com/article/10.1023/A:1018693028394
   Web of Science ®Google Scholar
• Li, Q., et al., 2013. Finite element analyses of several t-peel specimen configurations using cohesive zone models. In: 36th annual meeting of the adhesion society.
   Google Scholar
• Lindsey, G.H., 1967. Triaxial fracture studies. Journal of Applied Physics, 38 (12), 4843–4852. Available from: http://aip.scitation.org/doi/10.1063/1.1709232
   Web of Science ®Google Scholar
• Marek, C.R., and Herrin, M., 1968. Tensile behavior and failure characteristics of asphalt cements in thin films. Journal of the Association of Asphalt Paving Technologists, 1968, 1–54.
   Google Scholar
• Mishnaevsky, L.L., and Gross, D., 2005. Deformation and failure in thin films/substrate systems: methods of theoretical analysis. In: Applied mechanics reviews, 9. American Society of Mechanical Engineers Digital Collection, Vol. 58, 338–353. Available from: http://asmedigitalcollection.asme.org/appliedmechanicsreviews.
   Google Scholar
• Nicolaou, P.D., and Semiatin, S.L., 2001. The effect of stress triaxiality on tensile behavior of cavitating specimens. Journal of Materials Science, 36 (21), 5155–5159. Available from: https://link.springer.com/article/10.1023/A:1012485510150
   Web of Science ®Google Scholar
• Poulikakos, L., and Partl, M., 2011. Microscale tensile behavior of thin bitumen films. Experimental Mechanics, 51 (7), 1171–1183.
   Web of Science ®Google Scholar
• Schapery, R., 1981. On viscoelastic deformation and failure behavior of composite materials with distributed flaws. Advances in Aerospace Structures and Materials, 5–20.
   Google Scholar
• Sultana, S., Bhasin, A., and Bhasin, A., 2014a. Effect of chemical composition on rheology and mechanical properties of asphalt binder. Construction and Building Materials, 72 (1), 293–300.
   Google Scholar
• Sultana, S., Bhasin, A., and Liechti, K.M., 2014b. Rate and confinement effects on the tensile strength of asphalt binder. Construction and Building Materials, 53 (1257), 604–611.
   Google Scholar
• Sultana, S., Bhasin, A., and Liechti, K.M., 2014c. Rate and confinement effects on the tensile strength of asphalt binder. In: 93rd annual meeting, transportation research board, 1, Washington, DC.
   Google Scholar
• Wang, T., Kikno, K., and Mitsuo, N., 2002. Effect of triaxial stress constraint on the deformation and fracture of polymers. Acta Mechanica Sinica/Lixue Xuebao, 18 (5), 480–493. Available from: https://link.springer.com/article/10.1007/BF02486573
   Web of Science ®Google Scholar