247
Views
4
CrossRef citations to date
0
Altmetric
Research Article

Influence of temperature on deformation failure and acoustic emission characterisation of asphalt concrete under uniaxial compression

, , , &
Article: 2038380 | Received 14 Sep 2021, Accepted 31 Jan 2022, Published online: 16 Feb 2022

References

  • Aggelis, D., Mpalaskas, A., and Matikas, T, 2013. Investigation of different fracture modes in cement-based materials by acoustic emission. Cement and Concrete Research, 48, 1–8.
  • Aragão, F. T. S., et al., 2014. Numerical–experimental approach to characterize fracture properties of asphalt mixtures at low temperatures. Transportation Research Record, 2447 (1), 42–50.
  • Arnold, J. W., et al., 2014. Quantitative evaluation of low-temperature performance of sustainable asphalt pavements containing recycled asphalt shingles (RAS). Construction and Building Materials, 58, 1–8.
  • Das, A. K., and Singh, D, 2017. Investigation of rutting, fracture and thermal cracking behavior of asphalt mastic containing basalt and hydrated lime fillers. Construction and Building Materials, 141, 442–452.
  • Gu, X., Dong, Q., and Yuan, Q, 2015. Development of an innovative uniaxial compression test to evaluate permanent deformation of asphalt mixtures. Journal of Materials in Civil Engineering, 27 (1), 04014104.
  • Guo, Q., et al., 2021. Influence of basalt fiber on mode I and II fracture properties of asphalt mixture at medium and low temperatures. Theoretical and Applied Fracture Mechanics, 112, 102884.
  • Hill, B., et al., 2018. Evaluation of low temperature viscoelastic properties and fracture behavior of bio-asphalt mixtures. International Journal of Pavement Engineering, 19 (4), 362–369.
  • Hohl, A., et al., 2018. Computationally enabled 4D visualizations facilitate the detection of rock fracture patterns from acoustic emissions. Rock Mechanics and Rock Engineering, 51 (9), 2733–2746.
  • Huang, W., et al., 2020. Design of a skeleton-stabilized warm mix asphalt mixture and investigation of its fatigue and fracture performance. Construction and Building Materials, 248, 118618.
  • Hussan, S., et al., 2019. Evaluation and modelling of permanent deformation behaviour of asphalt mixtures using dynamic creep test in uniaxial mode. International Journal of Pavement Engineering, 20 (9), 1026–1043.
  • Im, S., et al., 2017. Multiscale testing-analysis of asphaltic materials considering viscoelastic and viscoplastic deformation. International Journal of Pavement Engineering, 18 (9), 783–797.
  • Ji, J., et al., 2020a. Rutting resistance of direct coal liquefaction residue (DCLR) modified asphalt mixture under variable loads over a wide temperature range. Construction and Building Materials, 257, 119489.
  • Ji, X., et al., 2020b. Application of numerical simulation method to improve shear strength and rutting resistance of asphalt mixture. International Journal of Pavement Engineering, 21 (1), 112–121.
  • Jiang, J., et al., 2019. Evaluation of the healing potential of asphalt mixtures based on a modified semi-circular bending test. Construction and Building Materials, 196, 284–294.
  • Jiao, Y., et al., 2019. Damage fracture characterization of pervious asphalt considering temperature effect based on acoustic emission parameters. Engineering Fracture Mechanics, 210, 147–159.
  • Lagos-Varas, M., et al., 2019. Study of the mechanical behavior of asphalt mixtures using fractional rheology to model their viscoelasticity. Construction and Building Materials, 200, 124–134.
  • Liu, H., et al., 2020. Fatigue-creep damage interaction model of asphalt mixture under the semi-sine cycle loading. Construction and Building Materials, 251, 119070.
  • Liu, C., et al., 2021. Laboratory investigation for the road performance of asphalt mixtures modified by rock asphalt–styrene butadiene rubber. Journal of Materials in Civil Engineering, 33 (3), 04020504.
  • Luo, X., Luo, R., and Lytton, R. L, 2015. Energy-based crack initiation criterion for viscoelastoplastic materials with distributed cracks. Journal of Engineering Mechanics, 141 (2), 04014114.
  • Mollenhauer, K., and Wistuba, M, 2012. Evaluation of hot-mix asphalt susceptibility to temperature-induced top-down fatigue cracking by means of uniaxial cyclic tensile stress test. Road Materials and Pavement Design, 13 (1), 171–190.
  • Moon, K. H., Marasteanu, M., and Turos, M, 2013. Comparison of thermal stresses calculated from asphalt binder and asphalt mixture creep tests. Journal of Materials in Civil Engineering, 25 (8), 1059–1067.
  • Pang, Z., Yuan, M., and Wakin, M. B, 2018. A random demodulation architecture for sub-sampling acoustic emission signals in structural health monitoring. Journal of Sound and Vibration, 431, 390–404.
  • Pronk, A., Gajewski, M., and Bańkowski, W, 2019. Processing of four point bending test results for visco-elasticity and fatigue models. International Journal of Pavement Engineering, 20 (10), 1226–1230.
  • Qian, G., et al., 2020. Compaction process tracking for asphalt mixture using discrete element method. Construction and Building Materials, 235, 117478.
  • Saeedifar, M., and Zarouchas, D, 2020. Damage characterization of laminated composites using acoustic emission: A review. Composites Part B: Engineering, 195, 108039.
  • Tan, Y., et al., 2012. Investigation of the deformation properties of asphalt mixtures with DIC technique. Construction and Building Materials, 37, 581–590.
  • Tan, Y., et al., 2019. Uniaxial compression behavior of cement mortar and its damage-constitutive model based on energy theory. Materials, 12 (8), 1309.
  • Wei, H., et al., 2020. Temporal-spatial evolution characteristics of acoustic emission in asphalt concrete cracking process under low temperature. Construction and Building Materials, 248, 118632.
  • Wei, H., et al., 2021. Numerical investigation on fracture evolution of asphalt mixture compared with acoustic emission. International Journal of Pavement Engineering, 1–11. https://doi.org/10.1080/10298436.2021.1902524.
  • Wisner, B., et al., 2019. Acoustic emission signal processing framework to identify fracture in aluminum alloys. Engineering Fracture Mechanics, 210, 367–380.
  • Witczak, M., Kaloush, K., Pellinen, T., El-Basyouny, M., and Von Quintus, H. (2002). Simple performance test for superpave mix design. Washington, DC: National Cooperative Highway Research Program (NCHRP) Rep.
  • Xia, C., et al., 2021. Unified characterizing fatigue performance of rubberized asphalt mixtures subjected to different loading modes. Journal of Cleaner Production, 279, 123740.
  • Yin, A., et al., 2015. Three-dimensional heterogeneous fracture simulation of asphalt mixture under uniaxial tension with cohesive crack model. Construction and Building Materials, 76, 103–117.
  • Yin, S., et al., 2021. Analysis of deformation failure and energy dissipation of mixed aggregate cemented backfill during uniaxial compression. Journal of Central South University (Science and Technology), 52 (3), 936–947.
  • Zhang, J., et al., 2019. Prediction of dynamic modulus of asphalt mixture using micromechanical method with radial distribution functions. Materials and Structures, 52 (2), 49.
  • Zhang, Y., Luo, R., and Lytton, R. L, 2012. Characterizing permanent deformation and fracture of asphalt mixtures by using compressive dynamic modulus tests. Journal of Materials in Civil Engineering, 24 (7), 898–906.
  • Zhang, Z., Roque, R., and Birgisson, B, 2001. Evaluation of laboratory-measured crack growth rate for asphalt mixtures. Transportation Research Record, 1767 (1), 67–75.
  • Zhou, J., et al., 2019. Evaluation of low temperature performance for SBS/CR compound modified asphalt binders based on fractional viscoelastic model. Construction and Building Materials, 214, 326–336.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.