Effect of maleic anhydride grafted and gamma-irradiated waste polypropylene on rheological properties of asphalt binder

References

• AASHTO MP19, 2010. Standard specification for performance-graded asphalt binder using multiple stress creep recovery (MSCR) test.
   Google Scholar
• AASHTO T313, 2012. Standard method of test for determining the flexural creep stiffness of asphalt binder using the bending beam rheometer (BBR).
   Google Scholar
• AASHTO T315, 2012. Standard method of test for determining the rheological properties of asphalt binder using a dynamic shear rheometer (DSR).
   Google Scholar
• AASHTO TP101, 2012. Standard method of test for estimating fatigue resistance of asphalt binders using the linear amplitude sweep.
   Google Scholar
• Ahmedzade, P., et al., 2015. Effects of waste polypropylene additive on the properties of bituminous binder. Procedia Manufacturing, 2, 165–170.
   Google Scholar
• Airey, G.D., 2004. Fundamental binder and practical mixture evaluation of polymer modified bituminous materials. International Journal of Pavement Engineering, 5 (3), 137–151.
   Google Scholar
• Al-Hadidy, A.I., and Yi-qiu, T., 2009. Effect of polyethylene on life of flexible pavements. Construction and Building Materials, 23 (3), 1456–1464.
   Web of Science ®Google Scholar
• Andriescu, A., et al., 2006. Validation of the essential work of fracture approach to fatigue grading of asphalt binders. Journal of Association of Asphalt Paving Technologists, 75, 1–37. http://worldcat.org/issn/02702932
   Google Scholar
• ASTM, D4402., et al., 2015. Standard test method for viscosity determination of asphalt at elevated temperatures using a rotational viscometer. American Society for Testing and Materials, PA, USA.
   Google Scholar
• ASTM D113, 2007. Standard test method for ductility of bituminous materials.
   Google Scholar
• ASTM D2872, 2012. Standard test method for effect of heat and air on a moving film of asphalt (rolling thin-film oven test).
   Google Scholar
• ASTM D36, 2014. Standard test method for softening point of bitumen (ring-and-ball apparatus). American Society for Testing and Materials, West Conshohocken, PA, USA.
   Google Scholar
• ASTM D5, 2013. Standard test method for penetration of bituminous materials. USA, ASTM International.
   Google Scholar
• Atul Narayan, S., et al., 2017. Mechanical behaviour of asphalt binders at high temperatures and specification for rutting. International Journal of Pavement Engineering, 18 (10), 916–927.
   Web of Science ®Google Scholar
• Barbosa, L.G., Piaia, M., and Ceni, G.H., 2017. Analysis of impact and tensile properties of recycled polypropylene. International Journal of Materials Engineering, 7 (6), 117–120.
   Google Scholar
• Behnood, A., 2019. Application of rejuvenators to improve the rheological and mechanical properties of asphalt binders and mixtures: a review. Journal of Cleaner Production, 231, 171–182.
   Web of Science ®Google Scholar
• Behnood, A., and Olek, J., 2017. Rheological properties of asphalt binders modified with styrene-butadiene-styrene (SBS), ground tire rubber (GTR), or polyphosphoric acid (PPA). Construction and Building Materials, 151, 464–478.
   Web of Science ®Google Scholar
• Bettini, S., and Agnelli, J., 1999. Grafting of maleic anhydride onto polypropylene by reactive processing. I. Effect of maleic anhydride and peroxide concentrations on the reaction. Journal of Applied Polymer Science, 74 (2), 247–255.
   Web of Science ®Google Scholar
• Cai, J., et al., 2019. Investigation on high-viscosity asphalt binder for permeable asphalt concrete with waste materials. Journal of Cleaner Production, 228, 40–51.
   Web of Science ®Google Scholar
• Casey, D., et al., 2008. Development of a recycled polymer modified binder for use in stone mastic asphalt. Resources, Conservation and Recycling, 52 (10), 1167–1174.
   Web of Science ®Google Scholar
• Chen, Z., et al., 2019. Low temperature and fatigue characteristics of treated crumb rubber modified asphalt after a long term aging procedure. Journal of Cleaner Production, 234, 1262–1274.
   Web of Science ®Google Scholar
• Chen, J.S., and Huang, C.C., 2007. Fundamental characterization of SBS-modified asphalt mixed with sulfur. Journal of Applied Polymer Science, 103 (5), 2817–2825.
   Web of Science ®Google Scholar
• D6521-13, A., 2013. Standard practice for accelerated aging of asphalt binder using a pressurized aging vessel (pav). USA: Annual Book of ASTM Standards.
   Google Scholar
• da Silva Aquino, K.A., 2012. Sterilization by gamma irradiation. Gamma Radiation, 9, 172–202.
   Web of Science ®Google Scholar
• Diop, M.F., and Torkelson, J.M., 2013. Maleic anhydride functionalization of polypropylene with suppressed molecular weight reduction via solid-state shear pulverization. Polymer, 54 (16), 4143–4154.
   Web of Science ®Google Scholar
• Dong, F., et al., 2016. Rheological behaviors and microstructure of SBS/CR composite modified hard asphalt. Construction and Building Materials, 115, 285–293.
   Web of Science ®Google Scholar
• Dong, Z., et al., 2019. Chemical characteristics of bio-asphalt and its rheological properties after CR/SBS composite modification. Construction and Building Materials, 200, 46–54.
   Web of Science ®Google Scholar
• Dreessen, S., Planche, J., and Gardel, V., 2009. A new performance related test method for rutting prediction: mscrt. Advanced Testing and Characterization of Bituminous Materials, 1, 971–980.
   Google Scholar
• Elseifi, M.A., et al., 2016. Rutting and fatigue behaviors of shingle-modified asphalt binders. Journal of Materials in Civil Engineering, 28 (2), 04015113.
   Google Scholar
• Fina, A., et al., 2009. POSS grafting on PPgMA by one-step reactive blending. Polymer, 50 (1), 218–226.
   Web of Science ®Google Scholar
• González, O., et al., 2002. Rheological techniques as a tool to analyze polymer- bitumen interactions: bitumen modified with polyethylene and polyethylene-based blends. Energy & Fuels, 16 (5), 1256–1263.
   Web of Science ®Google Scholar
• Habib, N.Z., et al., 2011. Rheological properties of polyethylene and polypropylene modified bitumen. International Journal Civil and Environmental Engineering, 3 (2), 96–100. https://publications.waset.org/pdf/10174.
   Google Scholar
• Hassanpour-Kasanagh, S., et al., 2020. Rheological properties of asphalt binders modified with recycled materials: a comparison with styrene-butadiene-styrene (SBS). Construction and Building Materials, 230, 117047.
   Google Scholar
• Herrington, P.R., Wu, Y., and Forbes, M.C., 1999. Rheological modification of bitumen with maleic anhydride and dicarboxylic acids. Fuel, 78 (1), 101–110.
   Web of Science ®Google Scholar
• Hintz, C., et al., 2011. Modification and validation of linear amplitude sweep test for binder fatigue specification. Transportation Research Record, 2207 (1), 99–106.
   Web of Science ®Google Scholar
• Jianshiuh, C., and Kueiyi, L., 2005. Mechanism and behavior of bitumen strength reinforcement using fibers. Journal of Materials Science, 40 (1), 87–95.
   Web of Science ®Google Scholar
• Kalantar, Z.N., Karim, M.R., and Mahrez, A., 2012. A review of using waste and virgin polymer in pavement. Construction and Building Materials, 33, 55–62.
   Web of Science ®Google Scholar
• Kataware, A.V., and Singh, D., 2018. Evaluation of intermediate temperature cracking performance of warm mix additive modified asphalt binders. Construction and Building Materials, 184, 165–176.
   Web of Science ®Google Scholar
• Kathari, P.M., 2016. Rheological properties of polypropylene reinforced asphalt binder. Transportation Infrastructure Geotechnology, 3 (3-4), 109–126.
   Google Scholar
• Khadivar, A., and Kavussi, A., 2013. Rheological characteristics of sbr and nr polymer modified bitumen emulsions at average pavement temperatures. Construction and Building Materials, 47, 1099–1105.
   Web of Science ®Google Scholar
• Laukkanen, O.V., et al., 2015. Creep-recovery behavior of bituminous binders and its relation to asphalt mixture rutting. Materials and Structures, 48 (12), 4039–4053.
   Web of Science ®Google Scholar
• Li, Z., and Li, C., 2013. Improvement of properties of styrene–butadiene–styrene-modified bitumen by grafted eucommia ulmoides gum. Road Materials and Pavement Design, 14 (2), 404–414.
   Web of Science ®Google Scholar
• Liang, M., et al., 2017. Rheological property and stability of polymer modified asphalt: effect of various vinyl-acetate structures in EVA copolymers. Construction and Building Materials, 137, 367–380.
   Web of Science ®Google Scholar
• Masad, E., et al., 2001. Modeling and experimental measurements of strain distribution in asphalt mixes. Journal of Transportation Engineering, 127 (6), 477–485.
   Web of Science ®Google Scholar
• Modarres, A., and Hamedi, H., 2014. Effect of waste plastic bottles on the stiffness and fatigue properties of modified asphalt mixes. Materials & Design, 61, 8–15.
   Web of Science ®Google Scholar
• Moghadas Nejad, F., Azarhoosh, A., and Hamedi, G.H., 2014. Effect of high density polyethylene on the fatigue and rutting performance of hot mix asphalt–a laboratory study. Road Materials and Pavement Design, 15 (3), 746–756.
   Web of Science ®Google Scholar
• Moreno, F., et al., 2013. The effect of crumb rubber modifier on the resistance of asphalt mixes to plastic deformation. Materials & Design, 47, 274–280.
   Web of Science ®Google Scholar
• Morrison, G.R., Hedmark, H., and Hesp, S.A.M., 1994. Elastic steric stabilization of polyethylene-asphalt emulsions by using low molecular weight polybutadiene and devulcanized rubber tire. Colloid and Polymer Science, 272 (4), 375–384.
   Web of Science ®Google Scholar
• Nho, Y., and Jin, J., 1995. The 5th International Conference on Radiation Curing. Thailand.
   Google Scholar
• Ouyang, C., et al., 2006. Low-density polyethylene/silica compound modified asphalts with high-temperature storage stability. Journal of Applied Polymer Science, 101 (1), 472–479.
   Web of Science ®Google Scholar
• Padhan, R.K., and Sreeram, A., 2018. Enhancement of storage stability and rheological properties of polyethylene (pe) modified asphalt using cross linking and reactive polymer based additives. Construction and Building Materials, 188, 772–780.
   Web of Science ®Google Scholar
• Polacco, G., et al., 2005. Asphalt modification with different polyethylene-based polymers. European Polymer Journal, 41 (12), 2831–2844.
   Web of Science ®Google Scholar
• Read, J., Whiteoak, D., and Hunter, R.N., 2003. The shell bitumen handbook. UK: Thomas Telford.
   Google Scholar
• Sabouri, M., Mirzaiyan, D., and Moniri, A., 2018. Effectiveness of linear amplitude sweep (LAS) asphalt binder test in predicting asphalt mixtures fatigue performance. Construction and Building Materials, 171, 281–290.
   Web of Science ®Google Scholar
• Sengoz, B., and Isikyakar, G., 2008. Evaluation of the properties and microstructure of SBS and EVA polymer modified bitumen. Construction and Building Materials, 22 (9), 1897–1905.
   Web of Science ®Google Scholar
• Singh, D., and Sawant, D., 2016. Understanding effects of RAP on rheological performance and chemical composition of SBS modified binder using series of laboratory tests. International Journal of Pavement Research and Technology, 9 (3), 178–189.
   Google Scholar
• Sun, Y., Wang, W., and Chen, J., 2019. Investigating impacts of warm-mix asphalt technologies and high reclaimed asphalt pavement binder content on rutting and fatigue performance of asphalt binder through MSCR and LAS tests. Journal of Cleaner Production, 219, 879–893.
   Web of Science ®Google Scholar
• Tan, X., 2014. Radiation grafting of maleic anhydride onto polypropylene in solid state via ultrafine blend. Radiation Effects and Defects in Solids, 169 (5), 437–446.
   Web of Science ®Google Scholar
• Tan, X., Xu, Y., and Wang, C., 2006. Pre-irradiation-induced graft reaction of maleic anhydride onto polypropylene. Radiation Effects & Defects in Solids, 161 (9), 529–535.
   Web of Science ®Google Scholar
• Tang, P., et al., 2018. Investigation of rheological properties of light colored synthetic asphalt binders containing different polymer modifiers. Construction and Building Materials, 161, 175–185.
   Web of Science ®Google Scholar
• Yeh, P., et al., 2005. Thermal and rheological properties of maleated polypropylene modified asphalt. Polymer Engineering & Science, 45 (8), 1152–1158.
   Web of Science ®Google Scholar
• Zhang, H., et al., 2013. Effect of linear low density-polyethylene grafted with maleic anhydride (LLDPE-g-MAH) on properties of high density-polyethylene/styrene–butadiene–styrene (HDPE/SBS) modified asphalt. Construction and Building Materials, 47, 192–198.
   Web of Science ®Google Scholar
• Zhu, J., Lu, X., and Kringos, N., 2018. Experimental investigation on storage stability and phase separation behaviour of polymer-modified bitumen. International Journal of Pavement Engineering, 19 (9), 832–841.
   Web of Science ®Google Scholar
• Ziari, H., 2019. Investigating the effects of loading, mechanical properties and layers geometry on fatigue life of asphalt pavements. Fatigue & Fracture of Engineering Materials & Structures, 42 (7), 1563–1577.
   Web of Science ®Google Scholar