DEM analysis of the evolution of reflection cracks in old cement concrete pavement with an ATB layer

References

• Barman, M., Vandenbossche, J. M., and Li, Z. C, 2017. Influence of interface bond on the performance of bonded concrete overlays on asphalt pavements. Journal of Transportation Engineering, Part B: Pavements, 143 (3), 04017008.
   Web of Science ®Google Scholar
• Ceylan, H., Gopalakrishnan, K., and Lytton, R. L, 2010. Neural networks modeling of stress growth in asphalt overlays due to load and thermal effects during reflection cracking. Journal of Materials in Civil Engineering, 23 (3), 221–229.
   Web of Science ®Google Scholar
• Chen, X., et al., 2021. Effect of gradation segregation on low-temperature crack resistance of asphalt pavement using 3d DEM. Construction and Building Materials, 274 (3), 122060.
   Google Scholar
• Chen, M. J., and Wong, Y. D, 2017. Evaluation of the development of aggregate packing in porous asphalt mixture using discrete element method simulation. Road Materials and Pavement Design, 18 (1-2), 1–22.
   Web of Science ®Google Scholar
• Dan, H. C., et al., 2018. Numerical simulation of an indirect tensile test for asphalt mixtures using discrete element method software. Journal of Materials in Civil Engineering, 30 (5), 04018067.
   Web of Science ®Google Scholar
• Ding, X. H., Ma, T., and Gao, W, 2017. Morphological characterization and mechanical analysis for coarse aggregate skeleton of asphalt mixture based on discrete-element modeling. Construction and Building Materials, 154, 1048–1061.
   Web of Science ®Google Scholar
• Gao, L., Li, H., Xie, J. and Yang, X., 2017. Mixed-mode fracture modeling of cold recycled mixture using discrete element method. Construction and Building Materials, 151, 625–635.
   Web of Science ®Google Scholar
• Gao, H., Yang, X. H., and Zhang, C. C, 2015. Experimental and numerical analysis of three-point bending fracture of pre-notched asphalt mixture beam. Construction and Building Materials, 90, 1–10.
   Web of Science ®Google Scholar
• Ghauch, Z. G., and Abou-Jaoude, G. G, 2013. Strain response of hot-mix asphalt overlays in jointed plain concrete pavements due to reflective cracking. Computers & Structures, 124, 38–46.
   Web of Science ®Google Scholar
• Gong, F. Y., et al., 2018. Lab assessment and discrete element modeling of asphalt mixture during compaction with elongated and flat coarse aggregates. Construction and Building Materials, 182, 573–579.
   Web of Science ®Google Scholar
• Huang, K., et al., 2016. The feasibility of dem to analyze the temperature field of asphalt mixture. Construction and Building Materials, 106, 592–599.
   Web of Science ®Google Scholar
• Islam, M. R., Vallejo, M. J., and Tarefder, R. A, 2017. Crack propagation in hot mix asphalt overlay using extended finite-element model. Journal of Materials in Civil Engineering, 29 (5), 04016296.
   Web of Science ®Google Scholar
• Kim, Y. K., and Lee, S. W, 2015. Service life of bonded concrete overlay. Transport, 168 (3), 1–9.
   Web of Science ®Google Scholar
• Li, S., Liu, X. W., and Liu, Z. H, 2014. Interlaminar shear fatigue and damage characteristics of asphalt layer for asphalt overlay on rigid pavement. Construction and Building Materials, 68, 341–347.
   Web of Science ®Google Scholar
• Liu, Y., et al., 2017. Discrete element modeling of realistic particle shapes in stone-based mixtures through matlab-based imaging process. Construction and Building Materials, 143, 169–178.
   Web of Science ®Google Scholar
• Miao, Y. H., et al., 2019. Investigating the functions of particles in packed aggregate blend using a discrete element method. Materials, 12 (4), 556.
   PubMed Web of Science ®Google Scholar
• Mindlin, R. D., and Deresiewicz, H, 1953. Elastic spheres in contact under varying oblique forces. ASME, September 1953, 327–344.
   Google Scholar
• Mokarem, D. W., Galal, K. A and Sprinkel, M. M, 2007. Performance evaluation of bonded concrete pavement overlays after 11 years. Transportation Research Record: Journal of the Transportation Research Board, 2005 (1), 3–10.
   Google Scholar
• Olsson, E., Jelagin, D., and Partl, M. N, 2019. New discrete element framework for modelling asphalt compaction. Road Materials and Pavement Design, 20, S604–S616.
   Web of Science ®Google Scholar
• Peng, Y., Harvey, J. T., and Sun, L. J, 2017. Three-dimensional discrete-element modeling of aggregate homogeneity influence on indirect tensile strength of asphalt mixtures. Journal of Materials in Civil Engineering, 29 (11), 04017211.
   Web of Science ®Google Scholar
• Potyondy, D. O., and Cundall, P. A, 2004. A bonded-particle model for rock. International Journal of Rock Mechanics and Mining Sciences, 41, 1329–1364.
   Web of Science ®Google Scholar
• Ren, J. L., and Sun, L, 2016. Characterizing air void effect on fracture of asphalt concrete at low-temperature using discrete element method. Engineering Fracture Mechanics, 170, 23–43.
   Web of Science ®Google Scholar
• Roozbahany, E. G., Partl, M. N., and Jelagin, D, 2019. Modelling the flow of asphalt under simulated compaction using discrete element. Construction and Building Materials, Available from: doi:10.1016/j.conbuildmat.2019.07.158.
   Web of Science ®Google Scholar
• Sakaguchi, H., Ozaki, E., and Igarashi, T., 1993. Plugging of the flow of granular materials during the discharge from a silo. International Journal of Modern Physics B, 07, 1949–1963.
   Google Scholar
• Sun, L., Ren, J. L., and Zhang, S. Y, 2018a. Fracture characteristics of asphalt concrete in mixed-loading mode at low-temperature based on discrete-element method. Journal of Materials in Civil Engineering, 30 (12), 04018321.
   Web of Science ®Google Scholar
• Sun, Z., Xu, Y., Tan, Y., Zhang, L., Xu, H. and Meng, A., 2018b. Investigation of sand mixture interlayer reducing the thermal constraint strain in asphalt concrete overlay. Construction and Building Materials, 171, 357–366.
   Web of Science ®Google Scholar
• Tan, Y. Q., and Guo, M, 2014a. Interfacial thickness and interaction between asphalt and mineral fillers. Materials and Structures, 47 (4), 605–614.
   Web of Science ®Google Scholar
• Tan, Y. Q., and Guo, M, 2014b. Micro- and nano-characteration of interaction between asphalt and filler. Journal of Testing and Evaluation, 42 (5), 1089–1097.
   Web of Science ®Google Scholar
• Tsuji, Y., Tanaka, T., and Ishida, T, 1992. Lagrangian numerical simulation of plug flow of cohesionless particles in a horizontal pipe. Powder Technology, 71, 239–250.
   Web of Science ®Google Scholar
• Tutka, P., et al., 2018. Durability of concrete pavement strengthened with asphalt layer with frp fibres. Archives of Civil Engineering, 64 (3), 81–97.
   Web of Science ®Google Scholar
• Wang, J, 2012. Analysis the control techniques of reflection crack on asphalt overlay of old cement concrete pavement. Applied Mechanics and Materials, 204-208, 1945–1948.
   Google Scholar
• Wang, X. Y., and Zhong, Y, 2019. Reflective crack in semi-rigid base asphalt pavement under temperature-traffic coupled dynamics using XFEM. Construction and Building Materials, 214, 280–289.
   Web of Science ®Google Scholar
• Xu, Y. L., et al., 2021. Mechanical characterisation of interface shear strain of multi-layer composite pavement. International Journal of Pavement Engineering, 22 (9), 1116–1122.
   Web of Science ®Google Scholar
• Xue, B., et al., 2020. Using random heterogeneous dem model to simulate the scb fracture behavior of asphalt concrete. Construction and Building Materials, 236, 117580. Available from: doi:10.1016/j.conbuildmat.2019.117580.
   Web of Science ®Google Scholar
• Yang, J. Y., et al., 2019. Research on drying shrinkage deformation and cracking risk of pavement concrete internally cured by saps. Construction and Building Materials, 227. Available from: doi:10.1016/j.conbuildmat.2019.116705.
   Web of Science ®Google Scholar
• You, L. Y., You, Z. P., and Yan, K. Z, 2018. Effect of anisotropic characteristics on the mechanical behavior of asphalt concrete overlay. Frontiers of Structural and Civil Engineering, 13, 110–122.
   Web of Science ®Google Scholar
• Yu, Q. K., Cai, L. C., and Wang, J. W, 2018. Experimental and fem research on airport cement concrete direct-thickening double-deck pavement slabs under aircraft single-wheel dynamic loads. Advances in Materials Ence and Engineering, 2018, 1–16.
   Google Scholar
• Zhong, Y., and Liu, H, 2014. Theoretical analysis of overlay resisting crack propagation in old cement concrete pavement. Road Materials and Pavement Design, 15 (3), 701–711.
   Web of Science ®Google Scholar
• Zhou, C. H., et al., 2017. Influence of particle shape on aggregate mixture's performance: dem results. Road Materials and Pavement Design, 20 (2), 399–413.
   Web of Science ®Google Scholar