Accelerated curing potential of cold mix asphalt using silica fume and hydrated lime as filler

References

• AASHTO T 283, 2014. Standard method of test for resistance of compacted asphalt mixtures to moisture induce damage.
   Google Scholar
• AASHTO T324, 2011. Standard method of test for Hamburg wheel-track testing of compacted hot mix asphalt (HMA).
   Google Scholar
• AASHTO T 329-05. Standard method of test for Moisture content of Hot mix Asphalt (HMA) by oven method.
   Google Scholar
• Al-Busaltan, S., et al., 2012a. Mechanical properties of an upgrading cold-mix asphalt using waste materials. Journal of Materials in Civil Engineering, 24 (12), 1484–1491.
   Web of Science ®Google Scholar
• Al-Busaltan, Shakir, et al., 2012b. Mechanical properties of an upgrading cold-Mix asphalt using waste materials. Journal of Materials in Civil Engineering, 24 (12), doi:10.1061/(ASCE)MT.1943-5533.0000540.
   Web of Science ®Google Scholar
• Al-Hdabi, Abbas, et al., 2014. Development of sustainable cold rolled surface course asphalt mixtures Using Waste Fly Ash and silica fume. Journal of Materials in Civil Engineering, 26 (3), March 1, © ASCE, ISSN 0899-1561/2014/3-536- 543/$25.00.
   Web of Science ®Google Scholar
• Al-Nageim, H., et al., 2012. A comparative study for improving the mechanical properties of cold bituminous emulsion mixtures with cement and waste materials. Construction and Building Materials, doi:10.1016/j.conbuildmat.2012.06.032.
   Google Scholar
• Anagnos, J.N, and Kennedy, T.W., 1972. Practical method of conducting the indirect tensile test. Center of Highway Research, University of Texas at Austin, Research Report 98-10.
   Google Scholar
• Asphalt Academy, 2009. Technical guideline: bitumen stabilised materials. Technical guide TG2, 2nd ed.
   Google Scholar
• Asphalt Institute, 1997. Asphalt cold mix manual. manual, Series No. 14. 3rd ed. Lexington, USA: Asphalt Institute.
   Google Scholar
• Asphalt Institute, 2008. Thickness design: asphalt pavements for highways & streets, Manual Series No. 1, 9th edition. Lexington, USA: Asphalt Institute.
   Google Scholar
• ASTM D1075-11. Standard test method for effect of water on compressive strength of compacted bituminous mix.
   Google Scholar
• ASTM D4123-82, 1995. Standard test method for indirect tension test for resilient modulus of bituminous mixtures.
   Google Scholar
• ASTM D6926-10. Standard practice for preparation of bituminous specimens using marshall apparatus.
   Google Scholar
• ASTM D6927-15. Standard test method for marshall stability and flow of asphalt mixtures.
   Google Scholar
• ASTM D6931-17. Standard test method for Indirect tensile stregth (IDT)of asphalt mixtures. ASTM International. 0-5.
   Google Scholar
• Barbod, Bahador, and Shalaby, Ahmed, 2014. Laboratory performance of asphalt emulsion treated base for cold regions applications. In: Transportation: past, present, future, Conference and exhibition of the Transportation Association of Canada.
   Google Scholar
• Bocci, M., et al., 2011. A study on the mechanical behaviour of cement–bitumen treated materials. Construction and Building Materials, 25, 773–778. doi:10.1016/j.conbuildmat.2010.07.007.
   Web of Science ®Google Scholar
• Bocci, Edoardo, 2018. Use of ladle furnace slag as filler in hot asphalt mixtures. Construction and Building Materials, 161, 156–164. doi:10.1016/j.conbuildmat.2017.11.120.
   Web of Science ®Google Scholar
• Brown, S.F., and Needham, D., 2000. A study of cement modified bitumen emulsion mixture. Asphalt Paving Technology, 69, 92–121.
   Google Scholar
• BS EN 1097-4, 1999. Test for mechanical and physical properties of aggregate; determination of the voids of dry compacted filler. London: BSI.
   Google Scholar
• BS EN 12697-17, 2017. Bituminous mixtures. Test methods. Particle loss of porous asphalt specimens.
   Google Scholar
• Cardoso, Fabio A., et al., 2009. Carbide lime and industrial hydrated lime characterization. Powder Technology, 195, 143–149. doi:10.1016/j.powtec.2009.05.017.
   Web of Science ®Google Scholar
• Carl, C., et al., 2019. Comparative study of the effect of long-term ageing on the behaviour of bitumen and mastics with mineral fillers. Construction and Building Materials, 225, 76–89. doi:10.1016/j.conbuildmat.2019.07.150.
   Web of Science ®Google Scholar
• Caro, S., et al., 2008. Moisture susceptibility of asphalt mixtures part I: mechanisms. International Journal of Pavement Engineering, 9 (2), 81–98.
   Google Scholar
• Choudhary, Rajan, 2008. Evaluation of bituminous concrete with different industrial wastes as filler. Ph.D thesis. IIT Roorkee.
   Google Scholar
• Cross, S.A., 1999. Experimental cold in-place recycling with hydrated lime. Journal of the Transportation Research Board, 1694 (1), 186e193.
   Google Scholar
• Debbarma, Solomon, Ransinchung, G.D., and Manish Dhaka, R.N., 2020. Effects of a Portland cement additive rich in SiO2 and Al2O3 in microstructure densification of RAP incorporated RCCP mixes. Construction and Building Materials, 258, 119626. doi:10.1016/j.conbuildmat.2020.119626.
   Web of Science ®Google Scholar
• Dolzycki, B., Szydlowski, C., and Jaczewski, M., 2020. The influence of combination of binding agents on fatigue properties of deep cold in-place recycled mixtures in indirect tensile fatigue test (ITFT). Construction and Building Materials, doi:10.1016/j.conbuildmat.2019.117825.
   Google Scholar
• Du, S., 2014. Effects of different fillers on performance properties of asphalt emulsion mixture. Journal of Testing and Evaluation, 42 (1), 126–134.
   Web of Science ®Google Scholar
• Du, S., 2014. Interaction mechanism of cement and asphalt emulsion in asphalt emulsion mixtures. Materials and Structures, 47 (7), 1149–1159.
   Web of Science ®Google Scholar
• Du, S., 2015. Performance characteristics of cold recycled mixture with asphalt emulsion and chemical additives. Advance Material Science Engineering, 2015, doi:10.1155/2015/271596.
   Web of Science ®Google Scholar
• Du, S., 2018. Effect of curing conditions on properties of cement asphalt mixtures. Construction and Building Materials, 164, 84–93. doi:10.1016/j.conbuildmat.2017.12.179.
   Web of Science ®Google Scholar
• Dulaimi, Anmar, et al., 2017. Performance analysis of a cold asphalt concrete binder course containing high-calcium Fly Ash utilizing waste material. Journal of Materials in Civil Engineering, ASCE, ISSN 0899-1561, doi:10.1061/(ASCE)MT.1943-5533.0001883.
   Web of Science ®Google Scholar
• Elkhadiri, I., Palacios, M., and Puertas, F., 2009. Effect of curing temperature on cement hydration. Ceramics – Silikaty, 53 (2), 65–75.
   Web of Science ®Google Scholar
• Escalante-Garcıa, J.I., and Sharp, J.H., 2001. The microstructure and mechanical properties of blended cements hydrated at various temperatures. Cement and Concrete Research, 31 (5), 695–702.
   Web of Science ®Google Scholar
• Faheem, A., 2009. Modeling of Asphalt Mastic in Terms of Filler-Bitumen Interaction. PhD Thesis, University of Madison-Wisconsin: USA.
   Google Scholar
• Fang, X., et al., 2016. Impact of rapid-hardening cements on mechanical properties of cement bitumen emulsion asphalt. Materials and Structures, 49, 487–498.
   Web of Science ®Google Scholar
• Ferrotti, G., Pasquini, E., and Canestrari, F., 2014. Experimental characterization of high-performance fiber-reinforced cold Mix asphalt mixtures. Construction and Building Materials, 57, 117–125. doi:10.1016/j.conbuildmat.2014.01.089.
   Web of Science ®Google Scholar
• Frigio, F., et al., 2013. Improved durability of recycled porous asphalt. Construction and Building Materials, 48, 755–763.
   Web of Science ®Google Scholar
• Gómez-Meijide, B., and Pérez, I., 2014. A proposed methodology for the global study of the mechanical properties of cold asphalt mixtures. Materials & Design, 57, 520–527.
   Web of Science ®Google Scholar
• Graziani, A., et al., 2016. Effect of curing on the physical and mechanical properties of cold-recycled bituminous mixtures. Materials & Design, 95, 358–369.
   Web of Science ®Google Scholar
• Head, R.W., 1974. An informal report of cold mix research using emulsified asphalt as a binder. Lino Lakes, MN: Association of Asphalt Paving Technologists.
   Google Scholar
• Hefer, A.W., 2004. Adhesion in bitumen-aggregate system and qualification of the effect of water on the adhesive bond. Material Science.doi:10.15781/T2NK0T.
   Google Scholar
• Hesami, Ebrahim, Birgisson, Bjorn, and Kringos, Niki, 2014. Numerical and experimental evaluation of the influence of the filler–bitumen interface in mastics. Materials and Structures, 47, 1325–1337. doi:10.1617/s11527-013-0237-8.
   Web of Science ®Google Scholar
• IRC:SP:100, 2014. Use of cold mix technology in construction and maintenance of roads using bitumen emulsion, Indian Road Congress.
   Google Scholar
• IS: 73, 2013. Paving bitumen specification (Fourth revision). New Delhi.
   Google Scholar
• James, A., 2006. Overview of asphalt emulsion, asphalt emulsion technology, Transport Research circular No. E-C102. Washington, D.C.: Transportation Research Board, pp. 1–15.
   Google Scholar
• Jenkins, K.J., 2000. Mix design considerations for cold and half-warm bituminous mixes with emphasis on foamed bitumen. PhD. thesis, University of Stellenbosch.
   Google Scholar
• Jenkins, K.J., Long, F.M., and Ebels, L.J., 2007. Foamed bitumen mixes shear performance? International Journal of Pavement Engineering, 8 (2), 85–98.
   Google Scholar
• Kavussi, A., and Modarres, A., 2010. A model for resilient modulus determination of recycled mixes with bitumen emulsion and cement from ITS testing result. Construction and Building Materials, 24, 2252–2259. doi:10.1016/j.conbuildmat.2010.04.031.
   Web of Science ®Google Scholar
• Kekwick, S.V., 2005. Best practice. bitumen emulsion and foamed bitumen materials laboratory processing. In: Proceedings of the 24th Southern African transport conference, SATC South Africa. ISBN No. 1-920-01712-7.
   Google Scholar
• Khweir, K., et al., 2004. Effect of curing time and the performance of cold asphalt mixtures. In: Proceedings of the 3rd Eurasphalt and Eurobiume CongressVienna, Austria, May 12-14, pp.460-465.
   Google Scholar
• Kim, Y.-R., et al., 2008. Evaluation of moisture damage mechanisms and effects of hydrated lime in asphalt mixtures through measurements of mixture component properties and performance testing. Journal of Materials in Civil Engineering, 20 (10), 659–667.
   Web of Science ®Google Scholar
• Kim, Y.-R., Little, D., and Song, I., 2013. Effect of mineral fillers on fatigue resistance and fundamental material characteristics: mechanistic evaluation. Transportation Research Record, 1832, 1–8.
   Google Scholar
• Kingham, I.R., 1973. Failure criteria developed from AASHO road test data. Highway Research board, special report 140. In: Proceedings of a symposium on structural design of asphalt concrete pavements to prevent fatigue cracking, pp 183–196.
   Google Scholar
• Leech, D., 1994. Cold Bituminous Materials for Use in the Structural Layers of Roads, vol. 75. Crowthorne (Berkshire, UK): Transport Research Laboratory, Project Report, UK. ISSN 0968-4093.
   Google Scholar
• Liao, Min-Chih, et al., 2016. Developing effective test methods for evaluating cold-mix asphalt patching materials. Journal of Materials in Civil Engineering, 28 (10), 04016108.
   Web of Science ®Google Scholar
• Likitlersuang, Suched, and Chompoorat, Thanakorn, 2016. Laboratory investigation of the performances of cement and fly ash modified asphalt concrete mixtures. International Journal of Pavement Research and Technology, 9, 337–344. doi:10.1016/j.ijprt.2016.08.002.
   Google Scholar
• Lothenbach, B., et al., 2007. Effect of temperature on the pore solution, microstructure and hydration products of Portland cement pastes. Cement Concrete Research, 37 (4), 483–491.
   Web of Science ®Google Scholar
• Maccarrone, S., 1994. Cold asphalt systems as an alternative to hot mix. In: Hawthorn Vic, ed. Proceedings of the 9th AAPA international Asphalt conference. Australian Asphalt Producers AssociationSurfers Paradise, Queensland, Australia: AAPA, 1–6.
   Google Scholar
• Marais, C.P., and Tait, M.I., 1989. Pavements with bitumen emulsion treated bases: proposed material specifications, mix design criteria and structural design procedures for Southern African conditions. In: 5th Conference on Asphalt Pavements for Southern Africa Swaziland, June 5–9, pp. 26–35.
   Google Scholar
• Micaelo, R., et al., 2017. Study of the effect of filler on the fatigue behaviour of bitumen-filler mastics under DSR testing. Construction and Building Materials, 155, 228–238. doi:10.1016/j.conbuildmat.2017.08.066.
   Web of Science ®Google Scholar
• Miljkovic, Miomir, and Radenberg, Martin, 2015. Characterising the influence of bitumen emulsion on asphalt. Materials and Structures, 48, 2195–2210.
   Web of Science ®Google Scholar
• Modarres, A., and Bengar, P.A., 2017. Investigating the indirect tensile stiffness, toughness and fatigue life of hot mix asphalt containing copper slag powder. International Journal of Pavement Engineering, doi:10.1080/10298436.2017.1373390.
   Web of Science ®Google Scholar
• Modarres, A., Rahmanzadeh, M., and Ayar, P., 2015. Effect of coal waste powder in hot mix asphalt compared to conventional fillers: mix mechanical properties and environmental impacts. Journal of Cleaner Production, 91, 262–268.
   Web of Science ®Google Scholar
• MoRT&H, 2013. Specifications for road and bridge works (fifth revision), Ministry of road Transport and highways, New Delhi, section 500, bituminous cold mix. Clause, 519 (1), 234–242.
   Google Scholar
• MS-14, 1997. Asphalt cold mix manual, third edition. Lexington, KY 40512-4052 USA: Asphalt Institute.
   Google Scholar
• Nassar, Ahmed I., et al., 2016. Mechanical, durability and microstructure properties of cold asphalt emulsion mixtures with different types of filler. Construction and Building Materials, 114, 352–363. doi:10.1016/j.conbuildmat.2016.03.112.
   Web of Science ®Google Scholar
• Nassar, A.I., et al., 2018. Characterisation of high-performance cold bitumen emulsion mixtures for surface courses. International Journal of Pavement Engineering, doi:10.1080/10298436.2016.1176165.
   Web of Science ®Google Scholar
• National Roads Authority, 2011. NRA interim advice note 01/11 on low energy pavements. Dublin: NRA.
   Google Scholar
• Niazi, Y., and Jalili, M., 2009. Effect of Portland cement and lime additives on properties of cold in-place recycled mixtures with asphalt emulsion. Construction and Building Materials, 23, 1338–1343. doi:10.1016/j.conbuildmat.2008.07.020.
   Web of Science ®Google Scholar
• Onuaguluchi, O., and Panesar, D.K., 2014. Hardened properties of concrete mixtures containing pre-coated crumb rubber and silica fume. Journal of Cleaner Production, 82, 125e131.
   Web of Science ®Google Scholar
• Oruc, S., Celik, F., and Akpinar, M.V., 2007. Effect of cement on emulsified asphalt mixtures. Journal of Materials Engineering and Performance, 16 (5), 578–583.
   Web of Science ®Google Scholar
• Pasandín, A.R., et al., 2016. Moisture damage resistance of hot-mix asphalt made with paper industry wastes as filler. Journal of Cleaner Production, 112, 853–862.
   Web of Science ®Google Scholar
• Pell, P.S., 1973. Characterization of fatigue behavior, Highway research board special report 140. In: Proceedings of a symposium on structural design of asphalt concrete pavements to prevent fatigue cracking Washington; 49–64.
   Google Scholar
• Rigden, P.J., 1947. The use of filler in bituminous road surfacing. Journal of the Society of Chemical Industry, 66, 299–309. doi:10.1002/jctb.5000660902.
   Web of Science ®Google Scholar
• Rojas, F., and Cabrera, J., 2002. The effect of temperature on hydration rate and stability of hydration phrases of metakaolin-lime-water systems. Cement Concrete Research, 32 (1), 133–138.
   Web of Science ®Google Scholar
• Ruckel, P.J., Acott, S.M., and Bowering, R.H., 1983. Foamed-asphalt paving mixtures: preparation of design mixes and treatment of test specimens. Transportation Research record. USA: Transportation Research Board. p. 88–95.
   Google Scholar
• Santucci, L.E., 1977. Thickness design procedure for asphalt and emulsified asphalt mixes. In: Proceedings of the 4th International Conference on the structural design of asphalt PavementsAnn Arbor, Michigan, pp. 424–456.
   Google Scholar
• Serfass, J.P., Henrat, J.P., and Carbonneau, X., 2004. Evaluation of cold mixes performance in the short and long term. In: Proceedings of the 3rd Eurasphalt and Eurobiume CongressVienna, Austria, May 12–14, pp. 482–492.
   Google Scholar
• Singh, Bhupendra, and Jain, Shobhit, 2021. Effect of lime and cement fillers on moisture susceptibility of cold mix asphalt. Road Materials and Pavement Design, doi:10.1080/14680629.2021.1976254.
   Web of Science ®Google Scholar
• South African Bitumen Association, 1993. GEMS–the design and use of granular emulsion mixes. Cape Town: Sabita Manual 14.
   Google Scholar
• South African Bitumen Association, 1999. ETB – the design and use of emulsion-treated bases. Sabita Manual 21, Cape Town. South Africa.
   Google Scholar
• Tayfur, Sureyya, Ozen, Halit, and Aksoy, Atakan, 2007. Investigation of rutting performance of asphalt mixtures containing polymer modifiers. Construction and Building Materials, 21, 328–337. doi:10.1016/j.conbuildmat.2005.08.014.
   Web of Science ®Google Scholar
• Thanaya, I.N.A., 2003. Incorporating the performance of cold bituminous emulsion mixtures (CBEMs) incorporating waste materials. Ph.D Thesis. School of civil engineering. The University of Leeds.
   Google Scholar
• Thanaya, I.N.A., Zoorob, S.E., and Forth, J.P., 2009. A laboratory study on cold-mix, cold-lay emulsion mixtures. Proceedings of the Institution of Civil Engineers-Transport, doi:10.1680/tran.2009.162.1.47.
   Web of Science ®Google Scholar
• Thomas Doyle, A., et al., 2013. Developing maturity methods for the assessment of cold-mix bituminous materials. Construction and Building Materials, 38, 524–529.
   Web of Science ®Google Scholar
• Wang, H., et al., 2011. Effect of mineral filler characteristics on asphalt mastic and mixture rutting potential. Transportation Research Record, 2208, 33–39.
   Web of Science ®Google Scholar
• West, R.C., and James, R.S., 2006. Evaluation of a lime kiln dust as a mineral filler for stone matrix asphalt. Transportation Research Board, 750, 1–18.
   Google Scholar
• Yan, J., et al., 2010. An experimental study on fatigue properties of emulsion and foam cold recycled mixes. Construction and Building Materials, 24 (11), 2151–2156. doi:10.1016/j.conbuildmat.2010.04.044.
   Web of Science ®Google Scholar
• Yan, Jinhai, et al., 2017. Early-age strength and long-term performance of asphalt emulsion cold recycled mixes with various cement contents. Construction and Building Materials, 137, 153–159. doi:10.1016/j.conbuildmat.2017.01.114.
   Web of Science ®Google Scholar
• Zachariah, Jince P., Sarkar, Partha Pratim, and Pal Manish, 2021. A study on the moisture damage and rutting resistance of polypropylene modified bituminous mixes with crushed brick aggregate wastes. Construction and Building Materials, 269, 121357. doi:10.1016/j.conbuildmat.2020.121357.
   Web of Science ®Google Scholar