Effect of reclaimed bio-oil and waste crumb rubber on bitumen viscoelasticity

References

• AASHTO, 2012. Standard Method of Test for Estimating Fatigue Resistance of Asphalt Binders Using the Linear Amplitude Sweep. AASHTO Designation: TP101; American Association of State Highway and Transportation Officials: Washington, DC, USA, 2014.
   Google Scholar
• Alfayez, S.A., Suleiman, A.R., and Nehdi, M.L., 2020. Recycling tire rubber in asphalt pavements: state of the Art. Sustainability, 12 (21), 9076.
   Web of Science ®Google Scholar
• ASTM., 2014. Standard Practice for Determining the Separation Tendency of Polymer from Polymer Modified Asphalt. ASTM Designation: D7173; American Society for Testing and Materials: West Conshohocken, PA, USA, 2014.
   Google Scholar
• Behnood, A., and Olek, J., 2017. Rheological properties of asphalt binders modified with styrene-butadiene-styrene (SBS), ground tire rubber (GTR), or polyphosphoric acid (PPA). Construction and Building Materials, 151, 464–478.
   Web of Science ®Google Scholar
• Celauro, C., Fecarotti, C., and Pirrotta, A., 2017. An extension of the fractional model for construction of asphalt binder master curve. European Journal of Environmental and Civil Engineering, 21 (1), 78–93.
   Web of Science ®Google Scholar
• Cho, S.H., Safavizadeh, S.A., and Kim, Y.R., 2017. Verification of the applicability of the time-temperature superposition principle to interface shear stiffness and strength of GlasGrid-reinforced asphalt mixtures. Road Materials and Pavement Design, 18 (4), 766–784.
   Web of Science ®Google Scholar
• Delgadillo, R., Nam, K., and Bahia, H., 2006. Why do we need to change G*/sin delta and how? Road Materials and Pavement Design, 7 (1), 7–27.
   Web of Science ®Google Scholar
• Diab, A., et al., 2020. Modeling shear stress response of bituminous materials under small and large strains. Construction and Building Materials, 252, 119133.
   Web of Science ®Google Scholar
• Dong, R., et al., 2018. Chemical and microscopic investigation of co-pyrolysis of crumb tire rubber with waste cooking oil at mild temperature. Waste Management, 79, 516–525.
   PubMed Web of Science ®Google Scholar
• Eskandarsefat, S., et al., 2019. Fundamental properties of bitumen binders containing novel cellulose-based poly-functional fibres. Composites Part B-Engineering, 163, 339–350.
   Web of Science ®Google Scholar
• Farina, A., et al., 2017. Life cycle assessment applied to bituminous mixtures containing recycled materials: crumb rubber and reclaimed asphalt pavement. Resources Conservation and Recycling, 117, 204–212.
   Web of Science ®Google Scholar
• Fini, E.H., Oldham, D.J., and Abu-Lebdeh, T., 2013. Synthesis and characterization of biomodified rubber asphalt: sustainable waste Management solution for scrap tire and swine manure. Journal of Environmental Engineering, 139 (12), 1454–1461.
   Web of Science ®Google Scholar
• Firoozifar, S.H., Foroutan, S., and Foroutan, S., 2011. The effect of asphaltene on thermal properties of bitumen. Chemical Engineering Research & Design, 89 (10A), 2044–2048.
   Web of Science ®Google Scholar
• Hajikarimi, P., Rahi, M., and Moghadas Nejad, F., 2015. Comparing different rutting specification parameters using high temperature characteristics of rubber- modified asphalt binders. Road Materials and Pavement Design, 16 (4), 751–766.
   Web of Science ®Google Scholar
• Huang, S.-C., and Pauli, A.T., 2008. Particle size effect of crumb rubber on rheology and morphology of asphalt binders with long-term aging. Road Materials and Pavement Design, 9 (1), 73–95.
   Web of Science ®Google Scholar
• Kabir, S.F., Mousavi, M., and Fini, E.H., 2020. Selective adsorption of bio-oils’ molecules onto rubber surface and its effects on stability of rubberized asphalt. Journal of Cleaner Production, 252, 119856.
   Web of Science ®Google Scholar
• Khabaz, F., and Khare, R., 2018. Molecular simulations of asphalt rheology: application of time-temperature superposition principle. Journal of Rheology, 62 (4), 941–954.
   Web of Science ®Google Scholar
• Lei, Y., et al., 2018. Evaluation of the effect of bio-oil on the high-temperature performance of rubber modified asphalt. Construction and Building Materials, 191, 692–701.
   Web of Science ®Google Scholar
• Lei, Z., Yi-qiu, T., and Bahia, H., 2016. Relationship between glass transition temperature and low temperature properties of oil modified binders. Construction and Building Materials, 104, 92–98.
   Web of Science ®Google Scholar
• Lesieutre, G.A., and Govindswamy, K., 1996. Finite element modeling of frequency-dependent and temperature-dependent dynamic behavior of viscoelastic materials in simple shear. International Journal of Solids and Structures, 33 (3), 419–432.
   Web of Science ®Google Scholar
• Liu, H., et al., 2021. Use of the multiple stress creep recovery (MSCR) test to characterize the rutting potential of asphalt binders: A literature review. Construction and Building Materials, 269, 121320.
   Web of Science ®Google Scholar
• Loeber, L., et al., 1998. Bitumen in colloid science: a chemical, structural and rheological approach. Fuel, 77 (13), 1443–1450.
   Web of Science ®Google Scholar
• Ma, J., et al., 2020. Rubber asphalt modified with waste cooking oil residue: optimized preparation, rheological property, storage stability and aging characteristic. Construction and Building Materials, 258, 120372.
   Web of Science ®Google Scholar
• Pszczola, M., Jaczewski, M., and Szydlowski, C., 2019. Assessment of thermal stresses in asphalt mixtures at Low temperatures using the tensile Creep Test and the bending beam Creep Test. Applied Sciences-Basel, 9 (5), 846.
   Web of Science ®Google Scholar
• Segre, N., and Joekes, I., 2000. Use of tire rubber particles as addition to cement paste. Cement and Concrete Research, 30 (9), 1421–1425.
   Web of Science ®Google Scholar
• Shan, L., et al., 2018. Nonlinear rheological behavior of bitumen under LAOS stress. Journal of Rheology, 62 (4), 975–989.
   Web of Science ®Google Scholar
• Shatanawi, K., et al., 2009. Effects of water activation of crumb rubber on the properties of crumb rubber-modified binders. International Journal of Pavement Engineering, 10 (4), 289–297.
   Web of Science ®Google Scholar
• Thomas, B.S., Gupta, R.C., and Panicker, V.J., 2016. Recycling of waste tire rubber as aggregate in concrete: durability-related performance. Journal of Cleaner Production, 112, 504–513.
   Web of Science ®Google Scholar
• Wang, C., et al., 2017. Application of time-temperature superposition principle on fatigue failure analysis of asphalt binder. Journal of Materials in Civil Engineering, 29 (1), 04016194.
   Web of Science ®Google Scholar
• Wang, D., et al., 2018. Rheological and chemical characteristic of warm asphalt rubber binders and their liquid phases. Construction and Building Materials, 193, 547–556.
   Web of Science ®Google Scholar
• Wang, T., et al., 2018. Energy consumption and environmental impact of rubberized asphalt pavement. Journal of Cleaner Production, 180, 139–158.
   Web of Science ®Google Scholar
• Wang, D., et al., 2020. Investigation on the low temperature properties of asphalt binder: glass transition temperature and modulus shift factor. Construction and Building Materials, 245, 118351.
   Web of Science ®Google Scholar
• Yang, Z., et al., 2018. Effect of aging on chemical and rheological properties of bitumen. Polymers, 10 (12), 1345.
   PubMed Web of Science ®Google Scholar
• Yu, H., et al., 2017. Optimization of preparation procedure of liquid warm mix additive modified asphalt rubber. Journal of Cleaner Production, 141, 336–345.
   Web of Science ®Google Scholar
• Yu, J., et al., 2018. Modification of asphalt rubber with nanoclay towards enhanced storage stability. Materials, 11 (11), 2093.
   PubMed Web of Science ®Google Scholar
• Yu, H., et al., 2018. Workability and mechanical property characterization of asphalt rubber mixtures modified with various warm mix asphalt additives. Construction and Building Materials, 175, 392–401.
   Web of Science ®Google Scholar
• Yu, J., et al., 2019. Recycled heavy Bio Oil as performance enhancer for rubberized bituminous binders. Polymers, 11 (5), 800.
   PubMed Web of Science ®Google Scholar
• Yu, H., et al., 2020. Effect of mixing sequence on asphalt mixtures containing waste tire rubber and warm mix surfactants. Journal of Cleaner Production, 246, 119008.
   Web of Science ®Google Scholar
• Yu, H., et al., 2021. Workability of rubberized asphalt from a perspective of particle effect. Transportation Research Part D-Transport and Environment, 91, 102712.
   Web of Science ®Google Scholar
• Yu, X., Leng, Z., and Wei, T., 2014. Investigation of the rheological modification mechanism of warm-Mix additives on crumb-rubber-modified asphalt. Journal of Materials in Civil Engineering, 26 (2), 312–319.
   Web of Science ®Google Scholar
• Zhang, R., et al., 2018. Using bio-based rejuvenator derived from waste wood to recycle old asphalt. Construction and Building Materials, 189, 568–575.
   Web of Science ®Google Scholar
• Zheng, Z., et al., 2018. Theoretical model of time-temperature superposition principle of the self-healing kinetics of supramolecular Polymer nanocomposites. Macromolecular Rapid Communications, 39 (20), 1800382.
   Web of Science ®Google Scholar
• Zhou, T., et al., 2020. Comparing effects of physisorption and chemisorption of bio-oil onto rubber particles in asphalt. Journal of Cleaner Production, 273, 123112.
   Web of Science ®Google Scholar
• Zou, G., et al., 2021. Quantitative characterize binder blending and diffusion in recycled asphalt mixture: An environmental-friendly solution using wooden cube and 3D fl uorescence image technology. Journal of Cleaner Production, 293, 126204.
   Web of Science ®Google Scholar