References
- Aflaki, S., et al., 2014. Comparing effects of biobinder with other asphalt modifiers on low-temperature characteristics of asphalt. Journal of Materials in Civil Engineering, 26 (3), 429–439. Available from: https://doi.org/10.1061/(ASCE)MT.1943-5533.0000835 [Accessed 5 Nov 2021].
- Alattieh, S.A., et al., 2020. Performance assessment of bio-modified asphalt binder using extracted bio oil from date seeds waste. International Journal of System Assurance Engineering and Management. Available from: https://doi.org/10.1007/s13198-020-00980-1.
- Anderson, D.A., and Kennedy, T.W, 1993. Development of SHRP binder specification (with discussion). Journal of the Association of Asphalt Paving Technologists, 62, 481–507.
- Andriescu, A., Hesp, S.A.M. & Youtcheff, J.S., 2004. Essential and plastic works of ductile fracture in asphalt binders. Transportation Research Record, 1875 (1), 1-7. Available from: https://doi.org/10.3141/1875-01 [Accessed 5 Nov 2021].
- Ashish, P.K., Singh, D., and Bohm, S, 2016. Evaluation of rutting, fatigue and moisture damage performance of nanoclay modified asphalt binder. Construction and Building Materials, 113, 341–350. Available from: https://www.sciencedirect.com/science/article/pii/S0950061816303543.
- Bárány, T., Czigány, T., and Karger-Kocsis, J, 2010. Application of the essential work of fracture (EWF) concept for polymers, related blends and composites: a review. Progress in Polymer Science, 35 (10), 1257–1287. Available from: http://www.sciencedirect.com/science/article/pii/S0079670010000626.
- Cannone Falchetto, A., and Moon, K.H., 2015. Comparisons of analytical and approximate interconversion methods for thermal stress computation. Canadian Journal of Civil Engineering, 42 (10), 705–719. Available from: https://doi.org/10.1139/cjce-2014-0558 [Accessed 18 May 2021].
- Cannone Falchetto, A., and Moon, K.H, 2016. Comparison of thermal stress calculation: Hopkins and Hamming’s algorithm and Laplace transformation approach. Journal of Materials in Civil Engineering, 28 (9), 04016076. Available from: https://doi.org/10.1061/(ASCE)MT.1943-5533.0001567 [Accessed 18 May 2021].
- Chen, J., et al., 2021. New innovations in pavement materials and engineering: a review on pavement engineering research 2021. Journal of Traffic and Transportation Engineering (English Edition), 8 (6), 815–999. Available from: https://www.sciencedirect.com/science/article/pii/S209575642100101X.
- Ding, H., Qiu, Y., and Rahman, A, 2019. Influence of thermal history on the intermediate and low-temperature reversible aging properties of asphalt binders. Road Materials and Pavement Design, 1–17. Available from: https://doi.org/10.1080/14680629.2019.1593227.
- Ferry, J.D, 1980. Viscoelastic properties of polymers. New York: John Wiley & Sons.
- Fini Ellie, H., Khodaii, A., and Hajikarimi, P., 2016. Fractional viscoelastic study of low-temperature characteristics of biomodified asphalt binders. Journal of Materials in Civil Engineering, 28 (9), 04016078. Available from: https://doi.org/10.1061/(ASCE)MT.1943-5533.0001525 [Accessed 5 Nov 2021].
- Ghorban Ebrahimi, M., Saleh, M., and Gonzalez, M.A.M., 2014. Interconversion between viscoelastic functions using the Tikhonov regularisation method and its comparison with approximate techniques. Road Materials and Pavement Design, 15 (4), 820–840. Available from: https://doi.org/10.1080/14680629.2014.924428.
- Hajikarimi, P., et al., 2018. Generalized fractional viscoelastic modeling of low temperature characteristics of asphalt binders modified with polyphosphoric acid and distillate aromatic extracts oil. Journal of Materials in Civil Engineering, 30 (7), 04018147. Available from: https://doi.org/10.1061/(ASCE)MT.1943-5533.0002353 [Accessed 05 Nov 2021].
- Hills, J., and Brien, D., 1966. The fracture of bitumens and asphalt mixes by temperature induced stressesed. Proceedings of the Association of Asphalt Paving Technologists, 35, 292–309.
- Krausmann, F., et al., 2009. Growth in global materials use, GDP and population during the 20th century. Ecological Economics, 68 (10), 2696–2705. Available from: https://www.sciencedirect.com/science/article/pii/S0921800909002158.
- Krausmann, F., et al., 2018. From resource extraction to outflows of wastes and emissions: the socioeconomic metabolism of the global economy, 1900–2015. Global Environmental Change, 52, 131–140. Available from: https://www.sciencedirect.com/science/article/pii/S0959378017313031.
- Lee, S.-J., Amirkhanian, S.N., and Kim, K.W, 2009. Laboratory evaluation of the effects of short-term oven aging on asphalt binders in asphalt mixtures using HP-GPC. Construction and Building Materials, 23 (9), 3087–3093. Available from: http://www.sciencedirect.com/science/article/pii/S0950061809001081.
- Lei, Z., et al., 2017. Effects of refined waste and bio-based oil modifiers on rheological properties of asphalt binders. Construction and Building Materials, 148, 504–511. Available from: http://www.sciencedirect.com/science/article/pii/S0950061817309881.
- Lei, Z., et al., 2018. Mechanism of low-and intermediate-temperature performance improvement of reclaimed oil-modified asphalt. Road Materials and Pavement Design, 19 (6), 1301–1313.
- Lei, Z., Bahia, H., and Yi-Qiu, T, 2015. Effect of bio-based and refined waste oil modifiers on low temperature performance of asphalt binders. Construction and Building Materials, 86, 95–100.
- Lei, Z., Yi-Qiu, T., and Bahia, H, 2016. Relationship between glass transition temperature and low temperature properties of oil modified binders. Construction and Building Materials, 104, 92–98.
- Li, Q., et al., 2018. Application of steel slag powder to enhance the low-temperature fracture properties of asphalt mastic and its corresponding mechanism. Journal of Cleaner Production, 184, 21–31. Available from: https://www.sciencedirect.com/science/article/pii/S0959652618305778.
- Li, T., et al., 2021. Use of polyurethane precursor–based modifier as an eco-friendly approach to improve performance of asphalt. Journal of Transportation Engineering, Part B: Pavements, 147 (3), 04021031. Available from: https://doi.org/10.1061/JPEODX.0000279 [Accessed 28 Jan 2022].
- Liu, S., et al., 2018. Waste engine oil influences on chemical and rheological properties of different asphalt binders. Construction and Building Materials, 191, 1210–1220. Available from: http://www.sciencedirect.com/science/article/pii/S0950061818325364.
- Lv, S., et al., 2020. Aging resistance evaluation of asphalt modified by Buton-rock asphalt and bio-oil based on the rheological and microscopic characteristics. Journal of Cleaner Production, 257, 120589.
- Ma, J., et al., 2020. Rubber asphalt modified with waste cooking oil residue: optimized preparation, rheological property, storage stability and aging characteristic. Construction and Building Materials, 258, 120372.
- Martinez, A.B., et al., 2009. The essential work of fracture (EWF) method – analyzing the post-yielding fracture mechanics of polymers. Engineering Failure Analysis, 16 (8), 2604–2617. Available from: http://www.sciencedirect.com/science/article/pii/S1350630709001393.
- Mohan, D., Pittman Jr, C.U., and Steele, P.H, 2006. Pyrolysis of wood/biomass for bio-oil: a critical review. Energy & Fuels, 20 (3), 848–889.
- Morsali, S, 2018. A novel perspective to bitumen refineries life cycle assessment and processes emissions. Acta Ecologica Sinica, 38 (3), 242–247. Available from: https://www.sciencedirect.com/science/article/pii/S187220321730032X.
- Mouzakis, D., Karger-Kocsis, J., and Moskala, E, 2000. Interrelation between energy partitioned work of fracture parameters and the crack tip opening displacement in amorphous polyester films. Journal of Materials Science Letters, 19 (18), 1615–1619.
- Nie, X., et al., 2020. Waste bio-oil as a compatibilizer for high content SBS modified asphalt. Petroleum Science and Technology, 38 (4), 316–322.
- Qiu, Y., et al., 2018. Damage characteristics of waste engine oil bottom rejuvenated asphalt binder in the non-linear range and its microstructure. Construction and Building Materials, 174, 202–209. Available from: http://www.sciencedirect.com/science/article/pii/S0950061818308547.
- Shang, Q., et al., 2010. Properties of Tung oil biodiesel and its blends with 0# diesel. Bioresource Technology, 101 (2), 826–828. Available from: https://www.sciencedirect.com/science/article/pii/S0960852409010803.
- Singh, D., Yenare, C., and Showkat, B, 2020. Rheological and chemical characteristics of asphalt binder modified with groundnut shell bio-oil. Advances in Civil Engineering Materials, 9 (1), 311–339. Available from: https://www.astm.org/DIGITAL_LIBRARY/JOURNALS/ACEM/PAGES/ACEM20190227.htm.
- Steffen, W., et al., 2015. Planetary boundaries: guiding human development on a changing planet. Science, 347 (6223), 1259855. Available from: http://science.sciencemag.org/content/347/6223/1259855.abstract.
- Thacker, S., et al., 2019. Infrastructure for sustainable development. Nature Sustainability, 2 (4), 324–331. Available from: https://doi.org/10.1038/s41893-019-0256-8.
- Tokede, O.O., et al., 2020. Life cycle assessment of asphalt variants in infrastructures: the case of lignin in Australian road pavements. Structures, 25, 190–199. Available from: https://www.sciencedirect.com/science/article/pii/S2352012420300783.
- Transport, E.D.O.C.J.O.H.A, 2020. Review on China’s pavement engineering research· 2020. China Journal of Highway and Transport, 33 (10), 1–66.
- Velasquez, R., Tabatabaee, H., and Bahia, H, 2011. Low temperature cracking characterization of asphalt binders by means of the single-edge notch bending (SENB) test. Asphalt Paving Technology-Proceedings Association of Asphalt Technologists, 80, 583.
- Villanueva, A., Ho, S., and Zanzotto, L, 2008. Asphalt modification with used lubricating oil. Canadian Journal of Civil Engineering, 35 (2), 148–157. Available from: https://doi.org/10.1139/L07-092 [Accessed 21 Dec 2020].
- Wang, D., et al., 2020a. Investigation on the low temperature properties of asphalt binder: glass transition temperature and modulus shift factor. Construction and Building Materials, 245, 118351. Available from: https://www.sciencedirect.com/science/article/pii/S0950061820303561.
- Wang, W., et al., 2020b. Multi-scale study on the high percentage warm-mix recycled asphalt binder based on chemical experiments. Construction and Building Materials, 252, 119124. Available from: http://www.sciencedirect.com/science/article/pii/S0950061820311296.
- Wang, D., et al., 2021. Thermal oxidative and ultraviolet ageing behaviour of nano-montmorillonite modified bitumen. Road Materials and Pavement Design, 22 (1), 121–139. Available from: https://doi.org/10.1080/14680629.2019.1619619.
- Williams, M.L., Landel, R.F., and Ferry, J.D, 1955. The temperature dependence of relaxation mechanisms in amorphous polymers and other glass-forming liquids. Journal of the American Chemical Society, 77 (14), 3701–3707.
- Xin, X., et al., 2020. Chemical, rheological properties and microstructure of road asphalt prepared from deoiled asphalt, slurry oil and polymers. Construction and Building Materials, 257, 119571.
- Xu, J., et al., 2020. Effects of warm mix additives on the thermal stress and ductile resistance of asphalt binders. Construction and Building Materials, 238, 117746. Available from: https://www.sciencedirect.com/science/article/pii/S095006181933199X.
- Xue, Y., et al., 2014. Effects of two biomass ashes on asphalt binder: dynamic shear rheological characteristic analysis. Construction and Building Materials, 56, 7–15. Available from: https://www.sciencedirect.com/science/article/pii/S0950061814001093.
- Yang, Q., et al., 2021. Exploiting the synergetic effects of graphene and carbon nanotubes on the mechanical properties of bitumen composites. Carbon, 172, 402–413. Available from: https://www.sciencedirect.com/science/article/pii/S0008622320309842.
- Yang, S.-H., and Suciptan, T, 2016. Rheological behavior of Japanese cedar-based biobinder as partial replacement for bituminous binder. Construction and Building Materials, 114, 127–133.
- Ye, F., et al., 2020. Property improvement of nano-montmorillonite/SBS modified asphalt binder by naphthenic oil. Construction and Building Materials, 243, 118200. Available from: http://www.sciencedirect.com/science/article/pii/S0950061820302051.
- Zhang, R., et al., 2020. Modification mechanism of using waste wood–based bio-oil to modify petroleum asphalt. Journal of Materials in Civil Engineering, 32 (12), 04020375. Available from: https://doi.org/10.1061/(ASCE)MT.1943-5533.0003464 [Accessed 4 Feb 2021].
- Zhao, S., et al., 2014. Characterizing rheological properties of binder and blending efficiency of asphalt paving mixtures containing RAS through GPC. Journal of Materials in Civil Engineering, 26 (5), 941–946. Available from: https://doi.org/10.1061/(ASCE)MT.1943-5533.0000896 [Accessed 23 July 2021].
- Zofka, A., and Marasteanu, M, 2007. Development of double edge notched tension (dent) test for asphalt binders. Journal of Testing and Evaluation, 35 (3), 259–265. Available from: https://www.astm.org/DIGITAL_LIBRARY/JOURNALS/TESTEVAL/PAGES/JTE100678.htm.