Evaluation of fracture behaviour of modified warm mix asphalt containing vertical and angular cracks under freeze-thaw damage

References

• Airey, G. D., Hunter, A. E., and Collop, A. C., 2008. The effect of asphalt mixture gradation and compaction energy on aggregate degradation. Construction and Building Materials, 22 (5), 972–980.
   Web of Science ®Google Scholar
• Albayati, A., et al., 2018. A sustainable pavement concrete using warm mix asphalt and hydrated lime treated recycled concrete aggregates. Sustainable Materials and Technologies, 18, e00081.
   Web of Science ®Google Scholar
• Aliha, M. R. M., Razmi, A., and Mansourian, A., 2017. The influence of natural and synthetic fibers on low temperature mixed mode I+ II fracture behavior of warm mix asphalt (WMA) materials. Engineering Fracture Mechanics, 182, 322–336.
   Web of Science ®Google Scholar
• Aliha, M. M., et al., 2014. Study of characteristic specification on mixed mode fracture toughness of asphalt mixtures. Construction and Building Materials, 54, 623–635.
   Web of Science ®Google Scholar
• Aliha, M. R. M., et al., 2015. Effect of temperature and air void on mixed mode fracture toughness of modified asphalt mixtures. Construction and Building Materials, 95, 545–555.
   Web of Science ®Google Scholar
• Aliha, M. R. M., et al., 2018. The effect of loading rate on fracture energy of asphalt mixture at intermediate temperatures and under different loading modes. Frattura ed Integrità Strutturale, 12 (43), 113–132.
   Web of Science ®Google Scholar
• Al-Qadi, I. L., Ozer, H., Lambros, J., El Khatib, A., Singhvi, P., Khan, T., and Doll, B., 2015. Testing protocols to ensure performance of high asphalt binder replacement mixes using RAP and RAS. United States: Illinois Center for Transportation/Illinois Department of Transportation.
   Google Scholar
• Ameri, M., et al., 2012. Mixed mode fracture resistance of asphalt concrete mixtures. Engineering Fracture Mechanics, 93, 153–167.
   Web of Science ®Google Scholar
• Anderson, T. L., 2005. Fracture mechanics-fundamentals and applications (3rd ed.). Boca Raton, FL: CRC Press.
   Google Scholar
• Arafat, S., et al., 2019. Sustainable lignin to enhance asphalt binder oxidative aging properties and mix properties. Journal of Cleaner Production, 217, 456–468.
   Web of Science ®Google Scholar
• Autelitano, F., Bianchi, F., and Giuliani, F., 2017. Airborne emissions of asphalt/wax blends for warm mix asphalt production. Journal of Cleaner Production, 164, 749–756.
   Web of Science ®Google Scholar
• Ayatollahi, M. R., Aliha, M. R. M., and Saghafi, H., 2011. An improved semi-circular bend specimen for investigating mixed mode brittle fracture. Engineering Fracture Mechanics, 78 (1), 110–123.
   Web of Science ®Google Scholar
• Badeli, S., Carter, A., and Doré, G., 2018. Complex modulus and fatigue analysis of asphalt mix after daily rapid freeze-thaw cycles. Journal of Materials in Civil Engineering, 30, 04018056.
   Web of Science ®Google Scholar
• Batista, K. B., et al., 2018. High-temperature, low-temperature and weathering aging performance of lignin modified asphalt binders. Industrial Crops and Products, 111, 107–116.
   Web of Science ®Google Scholar
• Behnood, A, 2020. A review of the warm mix asphalt (WMA) technologies: effects on thermo-mechanical and rheological properties. Journal of Cleaner Production, 120817.
   Google Scholar
• Caro, S., et al., 2012. Analysis of moisture damage susceptibility of warm mix asphalt (WMA) mixtures based on Dynamic Mechanical Analyzer (DMA) testing and a fracture mechanics model. Construction and Building Materials, 35, 460–467.
   Web of Science ®Google Scholar
• Espinosa, L., Caro, S., and Wills, J., 2020. Study of the influence of the loading rate on the fracture behaviour of asphalt mixtures and asphalt mortars. Construction and Building Materials, 262, 120037.
   Web of Science ®Google Scholar
• Fakhri, M., and Ahmadi, A., 2017. Evaluation of fracture resistance of asphalt mixes involving steel slag and RAP: susceptibility to aging level and freeze and thaw cycles. Construction and Building Materials, 157, 748–756.
   Web of Science ®Google Scholar
• Fakhri, M., and Mottahed, A. R., 2021. Improving moisture and fracture resistance of warm mix asphalt containing RAP and nanoclay additive. Construction and Building Materials, 272, 121900.
   Web of Science ®Google Scholar
• Fakhri, M., Kharrazi, E. H., and Aliha, M. R. M., 2018. Mixed mode tensile–In plane shear fracture energy determination for hot mix asphalt mixtures under intermediate temperature conditions. Engineering Fracture Mechanics, 192, 98–113.
   Web of Science ®Google Scholar
• Fakhri, M., Siyadati, S. A., and Aliha, M. R. M., 2020b. Impact of freeze–thaw cycles on low temperature mixed mode I/II cracking properties of water saturated hot mix asphalt: An experimental study. Construction and Building Materials, 261, 119939.
   Web of Science ®Google Scholar
• Fakhri, M., et al., 2020a. An evaluation of the mechanical and self-healing properties of warm mix asphalt containing scrap metal additives. Journal of Cleaner Production, 253, 119963.
   Web of Science ®Google Scholar
• Ghabchi, R., Rani, S., Zaman, M., and Ali, S. A., 2021. Effect of WMA additive on properties of PPA-modified asphalt binders containing anti-stripping agent. International Journal of Pavement Engineering, 24 (4), 418–431.
   Google Scholar
• Goli, H., and Latifi, M., 2020. Evaluation of the effect of moisture on behavior of warm mix asphalt (WMA) mixtures containing recycled asphalt pavement (RAP). Construction and Building Materials, 247, 118526.
   Web of Science ®Google Scholar
• Griffith, A. A., 1921. VI. The phenomena of rupture and flow in solids. Philosophical Transactions of the Royal Society of London. Series A, Containing Papers of a Mathematical or Physical Character, 221 (582–593), 163–198.
   Google Scholar
• Hamzah, M. O., Jamshidi, A., and Shahadan, Z., 2010. Evaluation of the potential of Sasobit® to reduce required heat energy and CO2 emission in the asphalt industry. Journal of Cleaner Production, 18 (18), 1859–1865.
   Web of Science ®Google Scholar
• Hernández, N., Williams, R. C., and Cochran, E. W., 2014. The battle for the “green” polymer. different approaches for biopolymer synthesis: bioadvantaged vs. bioreplacement. Organic & Biomolecular Chemistry, 12 (18), 2834–2849.
   PubMed Web of Science ®Google Scholar
• Hong, R. B., Wu, J. R., and Cai, H. B., 2020. Low-temperature crack resistance of coal gangue powder and polyester fibre asphalt mixture. Construction and Building Materials, 238, 117678.
   Web of Science ®Google Scholar
• Im, S., Kim, Y. R., and Ban, H., 2013. Rate-and temperature-dependent fracture characteristics of asphaltic paving mixtures. Journal of Testing and Evaluation, 41 (2), 257–268.
   Web of Science ®Google Scholar
• Jamshidi, A., et al., 2018. Estimating correlations between rheological characteristics, engineering properties, and CO2 emissions of warm-mix asphalt. Journal of Cleaner Production, 189, 635–646.
   Web of Science ®Google Scholar
• Jitsanigam, P., Biswas, W. K., and Compton, M., 2018. Sustainable utilization of lime kiln dust as active filler in hot mix asphalt with moisture damage resistance. Sustainable Materials and Technologies, 17, e00071.
   Web of Science ®Google Scholar
• Karimi, M. M., Dehaghi, E. A., and Behnood, A., 2021. A fracture-based approach to characterize long-term performance of asphalt mixes under moisture and freeze-thaw conditions. Engineering Fracture Mechanics, 241, 107418.
   Web of Science ®Google Scholar
• Karol, R. H. (2003). Chemical grouting and soil stabilization, revised and expanded (Vol. 12). New Jersey: Crc Press.
   Google Scholar
• Kaseer, F., et al., 2018. Development of an index to evaluate the cracking potential of asphalt mixtures using the semi-circular bending test. Construction and Building Materials, 167, 286–298.
   Web of Science ®Google Scholar
• Kassem, H. A., and Chehab, G. R., 2021. Characterisation of the mechanical performance of asphalt concrete mixtures with selected WMA additives. International Journal of Pavement Engineering, 22 (5), 625–642.
   Web of Science ®Google Scholar
• Kataware, A. V., and Singh, D., 2019. Dynamic mechanical analysis of crumb rubber modified asphalt binder containing warm mix additives. International Journal of Pavement Engineering, 20 (9), 1044–1054.
   Web of Science ®Google Scholar
• Kavussi, A., Karimi, M. M., and Dehaghi, E. A., 2020. Effect of moisture and freeze-thaw damage on microwave healing of asphalt mixes. Construction and Building Materials, 254, 119268.
   Web of Science ®Google Scholar
• Kim, M. J., et al., 2018. Enhancing mechanical properties of asphalt concrete using synthetic fibers. Construction and Building Materials, 178, 233–243.
   Web of Science ®Google Scholar
• Lottman, R. P., 1982. Predicting moisture-induced damage to asphaltic concrete field evaluation. NCHRP Report, 246, 1–50.
   Google Scholar
• Luo, Y., et al., 2017. The deterioration and performance improvement of long-term mechanical properties of warm-mix asphalt mixtures under special environmental conditions. Construction and Building Materials, 135, 622–631.
   Web of Science ®Google Scholar
• Mandlekar, N., Cayla, A., Rault, F., Giraud, S., Salaün, F., Malucelli, G., & Guan, J. P. (2018). An overview on the use of lignin and its derivatives in fire retardant polymer systems. Lignin-Trends and Applications, 9, 207–231.
   Google Scholar
• Ozer, H., et al., 2016. Development of the fracture-based flexibility index for asphalt concrete cracking potential using modified semi-circle bending test parameters. Construction and Building Materials, 115, 390–401.
   Web of Science ®Google Scholar
• Pan, T., 2012. A first-principles based chemophysical environment for studying lignins as an asphalt antioxidant. Constr Build Mater, 36, 654–664.
   Web of Science ®Google Scholar
• Pérez, I. P., et al., 2019. Use of lignin biopolymer from industrial waste as bitumen extender for asphalt mixtures. Journal of Cleaner Production, 220, 87–98.
   Web of Science ®Google Scholar
• Pérez-Jiménez, F., et al., 2013. Analysis of the mechanical behaviour of bituminous mixtures at low temperatures. Construction and Building Materials, 46, 193–202.
   Web of Science ®Google Scholar
• Pirmohammad, S., and Khanpour, M., 2020a. Fracture strength of warm mix asphalt concretes modified with crumb rubber subjected to variable temperatures. Road Materials and Pavement Design, 21 (Sup 1), S57–S75.
   Google Scholar
• Pirmohammad, S., and Kiani, A., 2016. Effect of temperature variations on fracture resistance of HMA mixtures under different loading modes. Materials and Structures, 49 (9), 3773–3784.
   Web of Science ®Google Scholar
• Pirmohammad, S., Shokorlou, Y. M., and Amani, B., 2020b. Laboratory investigations on fracture toughness of asphalt concretes reinforced with carbon and kenaf fibers. Engineering Fracture Mechanics, 226, 106875.
   Web of Science ®Google Scholar
• Shen, D. H., Kuo, M. F., and Du, J. C., 2005. Properties of gap-aggregate gradation asphalt mixture and permanent deformation. Construction and Building Materials, 19 (2), 147–153.
   Web of Science ®Google Scholar
• Silva, G., et al., 2020. Natural fibers as reinforcement additives for geopolymers–A review of potential eco-friendly applications to the construction industry. Sustainable Materials and Technologies, 23, e00132.
   Web of Science ®Google Scholar
• Singh, B., and Kumar, P., 2021. Investigating the performance of polymer and warm mix modified asphalt binders and mixtures. International Journal of Pavement Engineering, 1–15. https://doi.org/10.1080/10298436.2021.1915491
   Google Scholar
• Song, S. H., Paulino, G. H., and Buttlar, W. G., 2006. A bilinear cohesive zone model tailored for fracture of asphalt concrete considering viscoelastic bulk material. Engineering Fracture Mechanics, 73 (18), 2829–2848.
   Web of Science ®Google Scholar
• Stewart, C. M., Reyes, J. G., and Garcia, V. M., 2017. Comparison of fracture test standards for a super pave dense-graded hot mix asphalt. Engineering Fracture Mechanics, 169, 262–275.
   Web of Science ®Google Scholar
• Stewart, C. M., Oputa, C. W., and Garcia, E., 2018. Effect of specimen thickness on the fracture resistance of hot mix asphalt in the disk-shaped compact tension (DCT) configuration. Construction and Building Materials, 160, 487–496.
   Web of Science ®Google Scholar
• Vaitkus, A., et al., 2016. Influence of warm mix asphalt technology on asphalt physical and mechanical properties. Construction and Building Materials, 112, 800–806.
   Web of Science ®Google Scholar
• Wen, Y., et al., 2018. The engineering, economic, and environmental performance of terminal blend rubberized asphalt binders with wax-based warm mix additives. Journal of Cleaner Production, 184, 985–1001.
   Web of Science ®Google Scholar
• Xu, Q., Chen, H., and Prozzi, J. A., 2010. Performance of fiber reinforced asphalt concrete under environmental temperature and water effects. Construction and Building Materials, 24 (10), 2003–2010.
   Web of Science ®Google Scholar
• Zahedi, M., et al., 2020. Experimental determination of the optimum percentage of asphalt mixtures reinforced with Lignin. SN Applied Sciences, 2 (2), 258.
   Web of Science ®Google Scholar
• Zarei, A., Zarei, M., and Janmohammadi, O., 2019. Evaluation of the effect of lignin and glass fiber on the technical properties of asphalt mixtures. Arabian Journal for Science and Engineering, 44 (5), 4085–4094.
   Web of Science ®Google Scholar
• Zarei, M., Kordani, A. A., and Zahedi, M., 2021a. Evaluation of fracture behavior of modified Warm Mix Asphalt (WMA) under modes I and II at low and intermediate temperatures. Theoretical and Applied Fracture Mechanics, 114, 103015.
   Web of Science ®Google Scholar
• Zarei, M., Abdi Kordani, A., and Zahedi, M., 2021b. Pure mode I and pure mode II fracture resistance of modified hot mix asphalt at low and intermediate temperatures. Fatigue & Fracture of Engineering Materials & Structures, 44 (8), 2222–2243.
   Web of Science ®Google Scholar
• Zarei, M., Abdi Kordani, A., and Zahedi, M., 2021c. Evaluating the fracture behaviour of modified asphalt concrete composites (ACC) at low and intermediate temperatures using edge notched disc bend (ENDB) specimen. Road Materials and Pavement Design, 1–25. https://doi.org/10.1080/14680629.2021.1950819
   Web of Science ®Google Scholar
• Zarei, M., et al., 2020. Technical, economic, and environmental investigation of the effects of rubber powder additive on asphalt mixtures. Journal of Transportation Engineering, Part B: Pavements, 146 (1), 04019039.
   Web of Science ®Google Scholar
• Zarei, M., Kordani, A. A., Zahedi, M., Akbarinia, F., and Khanjari, M., 2021d. Evaluation of low and intermediate temperatures fracture indices for modified Warm mix asphalt (WMA) using edge notched disc bend (ENDB) specimen. Theoretical and Applied Fracture Mechanics, 116, 103137.
   Web of Science ®Google Scholar
• Zarei, M., Kordani, A. A., Khanjari, M., and Zahedi, M., 2022. Evaluation of fracture resistance of asphalt concrete involving Calcium Lignosulfonate and Polyester fiber under freeze-thaw damage. Theoretical and Applied Fracture Mechanics, 117, 103168.
   Web of Science ®Google Scholar
• Zeng, G., et al., 2014. Simulation of damage evolution and crack propagation in three-point bending pre-cracked asphalt mixture beam. Construction and Building Materials, 55, 323–332.
   Web of Science ®Google Scholar
• Ziari, H., et al., 2020. Crack resistance of hot mix asphalt containing different percentages of reclaimed asphalt pavement and glass fiber. Construction and Building Materials, 230, 117015.
   Web of Science ®Google Scholar