Analysing the potential use of a low-grade magnesium carbonate by-product as a filler in hot asphalt mixtures

References

• European standard 2003/33/EC, n.d. Council decision of 19 December 2002 establishing criteria and procedures for the acceptance of waste at landfills pursuant to Article 16 of and Annex II to Directive 1999/31/EC.
   Google Scholar
• Airey, G., Bhasin, A., Caro, S., and Little, D.N., 2007. Asphalt mixture moisture damage assessment combined with surface energy characterization. In: A. Loizos, T. Scarpas, and I. Al-Qadi, Advanced characterization of pavement and soil engineering materials. London: Taylor & Francis Group, 739–748.
   Google Scholar
• Al-Haydari, I.S., and Al-Haidari, H.S, 2020. Mechanical properties of polyethylene terephthalate-modified pavement mixture. IOP Conference Series: Materials Science and Engineering, 870, 1–9.
   Google Scholar
• Al-Saffar, Z.H., et al., 2021. A review on the durability of recycled asphalt mixtures embraced with rejuvenators. Sustainability (Switzerland), 13 (16), 1–24.
   Web of Science ®Google Scholar
• Al-Saffar, Z.H., et al., 2021. Impacts of maltene on the wettability and adhesion properties of rejuvenated asphalt binder. Arabian Journal for Science and Engineering, 46 (11), 10557–10568.
   Web of Science ®Google Scholar
• Apeagyei, A.K., Grenfell, J.R.A., and Airey, G.D, 2014. Moisture-induced strength degradation of aggregate-asphalt mastic bonds. Asphalt Paving Technology: Association of Asphalt Paving Technologists-Proceedings of the Technical Sessions, 83 (January), 549–582.
   Google Scholar
• Bueno, M., et al., 2014. Macrotexture influence on vibrational mechanisms of the tyre-road noise of an asphalt rubber pavement. International Journal of Pavement Engineering, 15 (7), 606–613.
   Web of Science ®Google Scholar
• Caldas, L.R., et al., 2022. How different tools contribute to climate change mitigation in a circular building environment? A Systematic Literature Review. Sustainability, 14 (3759), 1–24.
   Google Scholar
• Casado-Barrasa, R., et al., 2022. Evaluation of the rejuvenation of asphalt by means of oil-saturated porous aggregates. Construction and Building Materials, 318, 1–10.
   Web of Science ®Google Scholar
• Chakravarthi, S., and Shankar, S, 2021. Utilization of recycled aggregates in cement-treated bases: a state-of-the-art review. Innovative Infrastructure Solutions, 6 (4), 1–22.
   Web of Science ®Google Scholar
• Chen, Y., et al., 2020. Role of mineral filler in asphalt mixture. Road Materials and Pavement Design, 0 (0), 1–40.
   Google Scholar
• Consoli, N.C., et al., 2020. Durability of reclaimed asphalt pavement–coal fly ash–carbide lime blends under severe environmental conditions. Road Materials and Pavement Design, 21 (2), 557–569.
   Web of Science ®Google Scholar
• Dalhat, M.A., and Al-Abdul Wahhab, H.I, 2017. Performance of recycled plastic waste modified asphalt binder in Saudi arabia. International Journal of Pavement Engineering, 18 (4), 349–357.
   Web of Science ®Google Scholar
• de la Roche, C., et al., 2009. Development of a laboratory bituminous mixtures ageing protocol. In: Advanced testing and characterization of bituminous materials. Boca Raton, FL: CRC Press, 331–346. ISBN 978-0-415-55854-9.
   Google Scholar
• Formosa, J., et al., 2008. Comparative study of magnesium by-products and vermiculite formulations to obtain fire resistant mortars. Materials Science Forum, 587–588, 898–902.
   Google Scholar
• Formosa, J., et al., 2011. Novel fire-protecting mortars formulated with magnesium by-products. Cement and Concrete Research, 41 (2), 191–196.
   Web of Science ®Google Scholar
• Formosa Mitjans, J., 2012. Formulaciones de nuevos morteros y cementos especiales basadas en suproductos de magnesio. TDX (Tesis Doctorals en Xarxa).
   Google Scholar
• García Serrada, C., and del Cerro Iglesias, J., 2002. Utilización de Paval como filler de aportación para la fabricación de mezclas bituminosas en caliente. Carreteras: Revista Técnica de la Asociación Española de la Carretera, 123, 81–92.
   Google Scholar
• Guo, M., and Tan, Y, 2021. Interaction between asphalt and mineral fillers and its correlation to mastics’ viscoelasticity. International Journal of Pavement Engineering, 22 (1), 1–10.
   Web of Science ®Google Scholar
• Hansen, B.S., and Howard, I.L, 2020. Measuring aggregate and binder interaction by way of mixture tests before and after field ageing. Proceedings of the Institution of Civil Engineers - Construction Materials, 173 (6), 270–283.
   Web of Science ®Google Scholar
• Hasan, M.R., et al., 2021. Effects of waste glass addition on the physical and mechanical properties of brick. Innovative Infrastructure Solutions, 6 (1), 1–13.
   Web of Science ®Google Scholar
• Hassan, Abdul, et al., 2015. Microstructural characterisation of dry mixed rubberised asphalt mixtures. Construction and Building Materials, 82, 173–183.
   Web of Science ®Google Scholar
• Hussein, Z.H., et al., 2020. Rejuvenation of Hot Mix asphalt incorporating high RAP content: issues to consider. IOP Conference Series: Earth and Environmental Science, 498, 1–8.
   Google Scholar
• Li, R., et al., 2021. Innovative application of waste polyethylene terephthalate (PET) derived additive as an antistripping agent for asphalt mixture: experimental investigation and molecular dynamics simulation. Fuel, 300 (121015), 1–10.
   Google Scholar
• López-Montero, T., Miró, R., and Martínez, A, 2022. Effect of the use of marpol waste as a partial replacement of the binder for the manufacture of more sustainable bituminous mixtures. International Journal of Pavement Engineering, 1–15.
   Web of Science ®Google Scholar
• Ltifi, M., and Zafar, I, 2022. Effect of total substitution of crushed limestone sand on concrete durability. European Journal of Environmental and Civil Engineering, 26 (1), 121–143.
   Google Scholar
• Machsus, M., et al., 2021. Improvement for asphalt mixture performance using plastic bottle waste. International Journal of GEOMATE, 20 (79), 139–146.
   Web of Science ®Google Scholar
• Mancy Monsa, A, 2017. Modification of Hot Mix asphalt using polyethylene therephthalate (PET) waste bottles [modificación de una mezcla asfaltica en caliente utilizando residuos de botellas de tereftalato de polietileno]. Journal of Engineering and Computer Sciences (JECS), 18 (1), 62–73.
   Google Scholar
• Mhatre, P., et al., 2021. A systematic literature review on the circular economy initiatives in the European union. Sustainable Production and Consumption, 26, 187–202.
   Web of Science ®Google Scholar
• Miró, R., et al., 2005. Effect of filler on the aging potential of asphalt mixtures. Transportation Research Record: Journal of the Transportation Research Board, 1901, 10–17.
   Google Scholar
• Miró, R., et al., 2017. Effect of filler nature and content on the bituminous mastic behaviour under cyclic loads. Construction and Building Materials, 132, 33–42.
   Web of Science ®Google Scholar
• Mistry, M.K., et al., 2020. Consolidation and Hydraulic Conductivity of High-Plastic Clay Reinforced with Waste Tire Fibers.
   Google Scholar
• Movilla-Quesada, D., et al., 2018. Thermal suspectability analysis of the reuse of fly ash from cellulose industry as contribution filler in bituminous mixtures. Construction and Building Materials, 160, 268–277.
   Web of Science ®Google Scholar
• Pasandín, A.R., and Pérez, I, 2015. The influence of the mineral filler on the adhesion between aggregates and bitumen. International Journal of Adhesion and Adhesives, 58, 53–58.
   Web of Science ®Google Scholar
• Pérez-Jiménez, F., and Miró, R., 1993. Characterization procedure of asphalt binders with the Cántabro Test. UCL Method. In: Summaries and Papers, 5th Eurobitume Congress. Stockholm, 209–213.
   Google Scholar
• Pérez-Jiménez, F., and Miró, R., 2000. Binder specifications based on variation of the cohesion with temperature, moisture and ageing, UCL method. In: Euroasphalt & Eurobitume Congress, Barcelona, Spain.
   Google Scholar
• Pérez Jiménez, F., Miró Recasens, R., and Martínez, A., 2008. Effect of filler nature and content on the behaviour of bituminous mastics. Road Materials and Pavement Design, 9 (February), 417–431.
   Google Scholar
• Plati, C, 2019. Sustainability factors in pavement materials, design, and preservation strategies: A literature review. Construction and Building Materials, 211, 539–555.
   Web of Science ®Google Scholar
• Poulikakos, L.D., et al., 2017. Harvesting the unexplored potential of European waste materials for road construction. Resources, Conservation and Recycling, 116, 32–44.
   Web of Science ®Google Scholar
• Rahman, M.T., Mohajerani, A., and Giustozzi, F, 2020. Recycling of waste materials for asphalt concrete and bitumen: A review. Materials, 13 (1495), 1–21.
   Google Scholar
• Rasool, D.A, 2017. The effect of adding recycled polyethylene terephthalate (PET) on the mechanical properties of pavement. Journal of Ceramics and Concrete Sciences, 2 (3), 1–7.
   Google Scholar
• Revathi, T., et al., 2022. Adoption of alkali-activated cement-based binders (geopolymers) from industrial by-products for sustainable construction of utility buildings-A field demonstration. Journal of Building Engineering, 52 (104450), 1–22.
   Google Scholar
• Rodríguez-Fernández, I., et al., 2021. Technical feasibility for the replacement of high rates of natural aggregates in asphalt mixtures. International Journal of Pavement Engineering, 22 (8), 940–949.
   Web of Science ®Google Scholar
• Sangiorgi, C., et al., 2014. Waste bleaching clays as fillers in hot bituminous mixtures. Construction and Building Materials, 73, 320–325.
   Web of Science ®Google Scholar
• Wang, H., et al., 2011. Effect of mineral filler characteristics on asphalt mastic and mixture rutting potential. Transportation Research Record: Journal of the Transportation Research Board, 2208 (1), 33–39.
   Web of Science ®Google Scholar
• Wasfi Al-Mistarehi, B., Khadaywi, T.S, and Khaled Hussein, A., 2021. Investigating the effects on creep and fatigue behavior of asphalt mixtures with recycled materials as fillers. Journal of King Saud University - Engineering Sciences, 33 (5), 355–363.
   Google Scholar
• Wu, J., et al., 2014. The influence of mineral aggregates on bitumen ageing. International Journal of Pavement Research and Technology, 7 (2), 115–123.
   Google Scholar
• Wu, J., and Airey, G, 2011. The influence of mineral fillers on mastic aging properties. ICCTP 2011: Towards Sustainable Transportation Systems - Proceedings of the 11th International Conference of Chinese Transportation Professionals, 41186 (January 2020), 3450–3461.
   Google Scholar