References
- Anupam, B. R., et al., 2021a. Emerging technologies in cool pavements: A review. Construction and Building Materials, 299, 123892.
- Anupam, B. R., Sahoo, U. C., and Rath, P, 2020. Phase change materials for pavement applications: A review. Construction and Building Materials, 247, 118553.
- Anupam, B. R., Sahoo, U. C., and Rath, P., 2021b. Thermal and mechanical performance of phase change material incorporated concrete pavements. Road Materials and Pavement Design, 0 (0), 1–18.
- Chen, M., et al., 2010. “High-temperature hazards and prevention measurements for asphalt pavement.” 2010 International Conference on Mechanic Automation and Control Engineering, MACE2010, IEEE, 1341–1344.
- Dehdezi, P. K., et al., 2013. Thermal, mechanical and microstructural analysis of concrete containing microencapsulated phase change materials. International Journal of Pavement Engineering, 14 (5), 449–462.
- Gavin, G. J., et al., 2007. Impact of pavement thermophysical properties on surface temperatures. Journal of Materials in Civil Engineering, 19 (8), 683–690.
- Gonzo, E. E, 2002. Estimating correlations for the effective thermal conductivity of granular materials. Chemical Engineering Journal, 90 (3), 299–302.
- Jin, J., et al., 2017. Preparation and thermal properties of mineral-supported polyethylene glycol as form-stable composite phase change materials (CPCMs) used in asphalt pavements. Scientific Reports, 7 (1), 1–10.
- Jin, J., et al., 2018. Preparation and thermal properties of encapsulated ceramsite-supported phase change materials used in asphalt pavements. Construction and Building Materials, 190 (March 2019), 235–245.
- Lin, T. P., Ho, Y. F., and Huang, Y. S, 2007. Seasonal effect of pavement on outdoor thermal environments in subtropical Taiwan. Building and Environment, 42 (12), 4124–4131.
- Ma, B., et al., 2011. Effect of composite shape-stabilized phase change material on asphalt mixture temperature. Advanced Materials Research, 311–313, 2151–2154.
- Ma, B., Wang, S. S., and Li, J, 2010. Study on application of PCM in asphalt mixture. Advanced Materials Research, 168–170, 2625–2630.
- Marani, A., and Nehdi, M. L, 2019. Integrating phase change materials in construction materials: critical review. Construction and Building Materials, 217, 36–49.
- Parida, A., Bhattacharya, A., and Rath, P, 2020. Effect of convection on melting characteristics of phase change material-metal foam composite thermal energy storage system. Journal of Energy Storage, 32 (June), 101804.
- Patankar, S. V, 2018. Numerical heat transfer and fluid flow. City: CRC press.
- Ryms, M., et al., 2015. The use of lightweight aggregate saturated with PCM as a temperature stabilizing material for road surfaces. Construction and Building Materials, 81, 313–324.
- Salunkhe, P. B., and Shembekar, P. S, 2012. A review on effect of phase change material encapsulation on the thermal performance of a system. Renewable and Sustainable Energy Reviews, 16 (8), 5603–5616.
- Santamouris, M., Synnefa, A., and Karlessi, T, 2011. Using advanced cool materials in the urban built environment to mitigate heat islands and improve thermal comfort conditions. Solar Energy, 85 (12), 3085–3102.
- Shamsundar, N., and Sparrow, E. M., 1975. Analysis of multidimensional conduction phase change via the enthalpy model.
- Sharifi, N. P., and Mahboub, K. C, 2018. Application of a PCM-rich concrete overlay to control thermal induced curling stresses in concrete pavements. Construction and Building Materials, 183, 502–512.
- Swaminathan, C. R., and Voller, V. R, 1992. A general enthalpy method for modeling solidification processes. Metallurgical Transactions B, 23 (5), 651–664.