References
- ABAQUS Example Problems Manual (v6.6) [Online]. 2021. Available from: https://classes.engineering.wustl.edu/2009/spring/mase5513/abaqus/docs/v6.6/books/exa/default.htm?startat=ch03s01aex84.html [Accessed 18 Dec 2021].
- Abbondati, F., et al., 2021. Surface monitoring of road pavements using mobile crowdsensing technology. Measurement, 171, 108763.
- 丁俊杰 and 王国林, 2020. 基于全局灵敏度分析和径向基神经网络的智能轮胎三向力估测方法研究. 硕士, 江苏大学. doi:10.27170/d.cnki.gjsuu.2020.001553
- Baecker, M., Gallrein, A., and Haga, H., 2010. A tire model for very large tire deformations and its application in very severe events. SAE International Journal of Materials and Manufacturing, 3 (1), 142–151.
- Behroozinia, P., et al., 2020. An investigation towards intelligent tyres using finite element analysis. International Journal of Pavement Engineering, 21 (3), 311–321.
- El-Wakeel, A.S., et al., 2018. Towards a practical crowdsensing system for road surface conditions monitoring. IEEE Internet of Things Journal, 5 (6), 4672–4685.
- Erdogan, G., Alexander, L., and Rajamani, R., 2011. Estimation of tire-road friction coefficient using a novel wireless piezoelectric tire sensor. IEEE Sensors Journal, 11 (2), 267–279.
- Garcia-Pozuelo, D., et al., 2017. A novel strain-based method to estimate tire conditions using fuzzy logic for intelligent tires. Sensors, 17 (2), 350.
- Gudsoorkar, U., and Bindu, R., 2020. FEM for modeling and analysis of retreaded tire with Abaqus software. In V.K. Gunjan, S.N. Singh, T. Duc-Tan, G.J. Rincon Aponte, and A. Kumar, eds.: ICRRM 2019 – system reliability, quality control, safety, maintenance and management. Singapore: Springer Singapore. 92–97.
- Guo, K., and Liu, Q., 1998. A model of tire enveloping properties and its application on modelling of automobile vibration systems. Presented at the International Congress & Exposition. 980253.
- Johnsson, R., and Odelius, J., n.d. Methods for road texture estimation using vehicle measurements, 10.
- Kang, S.-W., Kim, J.-S., and Kim, G.-W., 2018. Road roughness estimation based on discrete Kalman filter with unknown input. Vehicle System Dynamics, 1–15.
- Karolczak, P., Kowalski, M., and Wiśniewska, M., 2020. Analysis of the possibility of using wavelet transform to Assess the condition of the surface layer of elements with flat-top structures. Machines, 8 (4), 65.
- Kim, B., et al., 2012. A comparison among Neo-Hookean model, Mooney-Rivlin model, and Ogden model for chloroprene rubber. International Journal of Precision Engineering and Manufacturing, 13 (5), 759–764.
- Kim, H.-J., et al., 2020. A road condition classification algorithm for a tire acceleration sensor using an artificial neural network. Electronics, 9 (3), 404.
- Masquelin, A.H., et al., 2021. Wavelet decomposition facilitates training on small datasets for medical image classification by deep learning. Histochemistry and Cell Biology, 155 (2), 309–317.
- Mendoza-Petit, M.F., et al., 2022. Characterization of the loss of grip condition in the Strain-Based Intelligent Tire at severe maneuvers. Mechanical Systems and Signal Processing, 168, 108586.
- Narasimha Rao, K.V., and Kumar, R.K., 2007. Simulation of tire dynamic behavior using various finite element techniques. International Journal for Computational Methods in Engineering Science and Mechanics, 8 (5), 363–372.
- Ni, T., et al., 2020. Road profile estimation using a 3D sensor and intelligent vehicle. Sensors, 20 (13), 3676.
- Niskanen, A., and Tuononen, A., 2015. Three three-axis IEPE accelerometers on the inner liner of a tire for finding the tire-road friction potential indicators. Sensors, 15 (8), 19251–19263.
- Nolte, M., Kister, N., and Maurer, M., 2018. Assessment of deep convolutional neural networks for road surface classification. In: 2018 21st International Conference on Intelligent Transportation Systems (ITSC). Presented at the 2018 21st International Conference on Intelligent Transportation Systems (ITSC), Maui, HI: IEEE, 381–386.
- Ojala, J.K., 2005. Using ABAQUS in tire development process, 10.
- Pohl, A., Steindl, R., and Reindl, L., 1999. The “intelligent tire” utilizing passive SAW sensors measurement of tire friction. IEEE Transactions on Instrumentation and Measurement, 48 (6), 1041–1046.
- Road Traffic Injuries [Online]. 2021. Available from: https://www.who.int/news-room/fact-sheets/detail/road-traffic-injuries [Accessed 30 Dec 2021].
- Safi, M.S., and Safi, S.M.M., 2021. Early detection of Alzheimer’s disease from EEG signals using Hjorth parameters. Biomedical Signal Processing and Control, 65, 102338.
- Singh, K.B., Ali Arat, M., and Taheri, S., 2013. An intelligent tire based tire-road friction estimation technique and adaptive wheel slip controller for antilock brake system. Journal of Dynamic Systems, Measurement, and Control, 135 (3), 031002.
- Sundararajan, D., 2015. Discrete wavelet transform: a signal processing approach. Chichester, UK; Hoboken, NJ: John Wiley & Sons.
- Tsujiuchi, N., et al., 2005. Rolling tire vibration caused by road roughness. Presented at the SAE 2005 Noise and Vibration Conference and Exhibition, 2005-01–2524.
- Wang, Y., Lu, Y.J., and Si, C.D., 2016. Tire-pavement coupling dynamic simulation under tire high-speed-rolling condition. International Journal of Simulation Modelling, 15 (2), 236–248.
- Xiong, Y., and Yang, X., 2018. A review on in-tire sensor systems for tire-road interaction studies. Sensor Review, 38 (2), 231–238.
- Xue, G., et al., 2017. Pothole in the Dark: Perceiving Pothole Profiles with Participatory Urban Vehicles. IEEE Transactions on Mobile Computing, 16 (5), 1408–1419.
- Yang, X., et al., 2015. FE-based tire loading estimation for developing strain-based intelligent tire system. Presented at the SAE 2015 World Congress & Exhibition, 2015-01–0627.
- Yi, J., 2008. A Piezo-sensor-based “Smart tire” system for mobile robots and vehicles. IEEE/ASME Transactions on Mechatronics, 13 (1), 95–103.
- Yunta, J., et al., 2019. Influence of camber angle on tire tread behavior by an on-board strain-based system for intelligent tires. Measurement, 145, 631–639.
- Zhang, L., et al., 2010. Piezoelectric detection device and experimental analysis of automobile wheelbase difference. In: 2010 2nd International Conference on Signal Processing Systems. Presented at the 2010 2nd International Conference on Signal Processing Systems (ICSPS), Dalian, China: IEEE, V1-407-V1-410.
- Zhao, W., 2020. Continuous measurement of tire deformation using long-gauge strain sensors. Mechanical Systems and Signal Processing, 14.
- Zhao, Y., and Wang, M.L., 2016. IRI measurement using dynamic tire pressure sensor with an axle accelerometer. Journal of Civil Structural Health Monitoring, 6 (5), 791–802.