167
Views
1
CrossRef citations to date
0
Altmetric
Research Article

Moisture resistance of stone matrix asphalt at lab simulated high temperature and continuous rainfall condition

, , &
Article: 2096884 | Received 09 Mar 2022, Accepted 27 Jun 2022, Published online: 20 Jul 2022

References

  • AASHTO T 324, 2019. Hamburg wheel-track testing of compacted asphalt mixtures.
  • Ameli, A., et al., 2021. The effects of gilsonite and crumb rubber on moisture damage resistance of stone matrix asphalt mixtures. Construction and Building Materials, 274, 122052.
  • Ameli, A. and Babagoli, R., 2021. Evaluation of the influence of antistripping agents on water sensitivity of the stone matrix asphalt mixture modified by recycled ground tire rubber and waste polyethylene terephthalate. Advances in Materials Science and Engineering, 2021, 1–18.
  • Arshad, A.K., et al., 2017. Investigation on moisture susceptibility and rutting resistance of asphalt mixtures incorporating nanosilica modified binder. Pertanika Journal of Science and Technology, 25, 19–30.
  • Aschenrener, T. and Currier, G., 1993. Report: Influence of testing variables on the results from the Hamburg wheel-tracking device. Denver: Colorado Department of Transportation, CDOT-DTD-R-93-22.
  • ASTM C 127, 2015. Standard test method for relative density (specific gravity) and absorption of coarse aggregate.
  • ASTM C 128, 2015. Standard test method for relative density (specific gravity) and absorption of fine aggregate.
  • ASTM C 131, 2020. C131/C131M: 2020 Standard test method for resistance to degradation of small-size coarse aggregate by abrasion and impact in the Los Angeles machine.
  • ASTM C 136, 2019. Standard test method for sieve analysis of fine and coarse aggregates.
  • ASTM C 88, 2018. Standard test method for soundness of aggregates by use of sodium sulfate or magnesium sulfate.
  • ASTM D 36, 2020. Standard test method for softening point of bitumen (ring-and-ball apparatus).
  • ASTM D 3625, 2012. Standard practice for effect of water on bituminous-coated aggregate using boiling water.
  • ASTM D 4402, 2015. Standard test method for viscosity determination of asphalt at elevated temperatures using a rotational viscometer.
  • ASTM D 4798, 2016. Standard practice for accelerated weathering test conditions and procedures for bituminous materials (xenon-arc method).
  • ASTM D 5, 2020. Standard test method for penetration of bituminous materials.
  • ASTM D 6816, 2016. Standard practice for determining low-temperature performance grade (PG) of asphalt binders.
  • ASTM D 6925, 2015. Standard test method for preparation and determination of the relative density of asphalt mix specimens by means of the superpave gyratory compactor.
  • ASTM D 6931, 2017. Standard test method for indirect tensile (IDT) strength of asphalt mixtures.
  • Bairgi, B.K., Tarefder, R.A., and Ahmed, M.U., 2018. Long-term rutting and stripping characteristics of foamed warm-mix asphalt (WMA) through laboratory and field investigation. Construction and Building Materials, 170, 790–800.
  • Cheng, J.C., Shen, J.N., and Xiao, F.P., 2011. Moisture susceptibility of warm-mix asphalt mixtures containing nanosized hydrated lime. Journal of Materials in Civil Engineering, 23 (11), 1552–1559.
  • Cucalon, L.G., et al., 2016. Evaluation of moisture susceptibility minimization strategies for warm-mix asphalt: case study. Journal of Materials in Civil Engineering, 28 (2), 1–9.
  • DeCarlo, C., et al., 2020. Comparative evaluation of moisture susceptibility test methods for routine usage in asphalt mixture design. Journal of Testing and Evaluation, 48 (1), 88–106.
  • Dehnad, M.H., Khodaii, A., and Nejad, F.M., 2013. Moisture sensitivity of asphalt mixtures under different load frequencies and temperatures. Construction and Building Materials, 48, 700–707.
  • Fang, G.-C., et al., 2018. Wet depositions of mercury during plum rain season in Taiwan. Environmental Geochemistry and Health, 40 (4), 1601–1607.
  • Gubler, R., et al., 2005. Influence of water and temperature on mechanical properties of selected asphalt pavements. Materials and Structures/Materiaux et Constructions, 38 (279), 523–532.
  • Haghshenas, H.F., et al., 2015. Stripping potential of HMA and SMA: a study using statistical approach. Journal of Materials in Civil Engineering, 27 (11), 6.
  • Hossain, M.I., et al., 2016. Rutting potential of an asphalt pavement exposed to high temperatures. In: K. Wang, ed. International Conference on Transportation and development 2016: projects and practices for prosperity, of Conference 26–29. Jun Houston: American Society of Civil Engineers, 1194–1205.
  • Hou, X.D., et al., 2018. Identification of asphalt aging characterization by spectrophotometry technique. Fuel, 226, 230–239.
  • Larrain, M.M.M. and Tarefder, R.A., 2016. Weibull model for rutting prediction of warm-mix asphalt agents: using Hamburg wheel-tracking device results. Transportation Research Record, 2575, 206–212.
  • Lee, S.H., et al., 2019. Evaluation of rejuvenators based on the healing and mechanistic performance of recycled asphalt mixture. Construction and Building Materials, 220, 628–636.
  • Liu, Y., et al., 2017. Effect of coarse aggregate morphology on the mechanical properties of stone matrix asphalt. Construction and Building Materials, 152, 48–56.
  • Liu, Y., Cheng, X., and Yang, Z, 2019. Effect of mixture design parameters of stone mastic asphalt pavement on its skid resistance. Applied Sciences-Basel, 9 (23), 5171.
  • Luo, Y.F., et al., 2017. The deterioration and performance improvement of long-term mechanical properties of warm-mix asphalt mixtures under special environmental conditions. Construction and Building Materials, 135, 622–631.
  • Lytton, R.L., et al., 2005. FHWA technical report: measurements of surface energy and its relationship to moisture damage. Texas: Texas Transportation Institute.
  • Ministry of Transportation of the People's Republic of China, 2005. Test methods of aggregate for highway engineering.
  • Ministry of Transportation of the People's Republic of China JTG E 20, 2011. Standard test methods of bitumen and bituminous mixtures for highway engineering.
  • NOAA. National Centers for Environmental Information [online]. America: National Oceanic and Atmospheric Administration. Available from: https://www.ncei.noaa.gov/access/search/data-search/.
  • Perez-Fortes, A.P., Varas-Muriel, M.J., and Castineiras, P., 2021. Long-term behavior of the micro-texture of aggregates used on roads subjected to extreme climate conditions and winter maintenance operations. Wear, 474, 203757.
  • Rahman, A.S.M.A., Larrain, M.M.M., and Tarefder, R.A., 2019. Development of a nonlinear rutting model for asphalt concrete based on Weibull parameters. International Journal of Pavement Engineering, 20 (9), 1055–1064.
  • Ren, J., et al., 2020. Characterization and prediction of rutting resistance of rock asphalt mixture under the coupling effect of water and high-temperature. Construction and Building Materials, 254, 119316.
  • Sharma, V. and Goyal, S, 2006. Comparative study of performance of natural fibres and crumb rubber modified stone matrix asphalt mixtures. Canadian Journal of Civil Engineering, 33 (2), 134–139.
  • Sun, Z.Q., et al., 2019. Low-temperature performance of asphalt mixture based on statistical analysis of winter temperature extremes: a case study of Harbin China. Construction and Building Materials, 208, 258–268.
  • Varveri, A., Avgerinopoulos, S., and Scarpas, A., 2016. Experimental evaluation of long- and short-term moisture damage characteristics of asphalt mixtures. Road Materials and Pavement Design, 17 (1), 168–186.
  • Wang, J., et al., 2019. Performance of cement asphalt mortar in ballastless slab track over high-speed railway under extreme climate conditions. International Journal of Geomechanics, 19 (5), 04019037.
  • Wang, Y., et al., 2020. Evaluation of the decay characteristics of pavement skid resistance using three-dimensional texture from accelerated abrasion test. Journal of Transportation Engineering Part B-Pavements, 146 (4), 04020073.
  • Wang, F., et al., 2021. Performance deterioration of asphalt mixture under chloride salt erosion. Materials, 14 (12), 3339.
  • Wu, S., et al., 2017. Evaluation of long-term performance of stone matrix asphalt in Washington state. Journal of Performance of Constructed Facilities, 31 (1), 04016074.
  • Xiong, R., et al., 2019. Performance evaluation of asphalt mixture exposed to dynamic water and chlorine salt erosion. Construction and Building Materials, 201, 121–126.
  • Xu, G., et al., 2021. Characterization of three-dimensional internal structure evolution in asphalt mixtures during freeze-thaw cycles. Applied Sciences-Basel, 11 (9), 4316.
  • Yin, F., et al., 2014. Novel method for moisture susceptibility and rutting evaluation using Hamburg wheel tracking test. Transportation Research Record, 2446, 1–7.
  • Zhou, L., Ye, B., and Xia, S., 2017. Assessing membrane biofouling and its gel layer of anoxic/oxic membrane bioreactor for megacity municipal wastewater treatment during plum rain season in Yangtze River Delta, China. Water Research, 127, 22–31.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.