Rutting-resistance investigation of amorphous carbon powder modified binder and asphalt mixture containing siliceous aggregates

References

• AASHTO-M332-14, 2015. Performance-graded asphalt binder using multiple stress creep recovery (MSCR) test.
   Google Scholar
• Abdullah, M. E., et al., 2015. A review on the exploration of nanomaterials application in pavement engineering. Jurnal Teknologi, 73 (4), 69–76.
   Web of Science ®Google Scholar
• Anderson, R., Christensen, D., and Bonaquist, R., 2003. Estimating the rutting potential of asphalt mixtures using superpave gyratory compaction properties and indirect tensile strength (with discussion). Journal of the Association of Asphalt Paving Technologists, 72, 1–26.
   Google Scholar
• Arabani, M. and Tahami, S. A., 2017. Assessment of mechanical properties of rice husk ash modified asphalt mixture. Construction and Building Materials, 149, 350–358.
   Web of Science ®Google Scholar
• Asi, I. and Assa’ad, A., 2005. Effect of Jordanian oil shale fly ash on asphalt mixes. Journal of Materials in Civil Engineering, 17 (5), 553–559.
   Web of Science ®Google Scholar
• ASTMD5892, 2000. Standard specification for type IV polymer-modified asphalt cement for use in pavement construction. ASTM International.
   Google Scholar
• Azahar, N., et al., 2021. Properties of cup lump rubber modified asphalt binder. Road Materials and Pavement Design, 22 (6), 1329–1349.
   Web of Science ®Google Scholar
• Collins, R., Shami, H., and Lai, J., 1996. Use of Georgia loaded wheel tester to evaluate rutting of asphalt samples prepared by superpave gyratory compactor. Transportation Research Record: Journal of the Transportation Research Board, 1545, 161–168.
   Google Scholar
• Fakhri, M. and Ghanizadeh, A. R., 2014. An experimental study on the effect of loading history parameters on the resilient modulus of conventional and SBS-modified asphalt mixes. Construction and Building Materials, 53, 284–293.
   Web of Science ®Google Scholar
• Fattahi Amirdehi, H. R., et al., 2019. Using the generalized maximum tangential stress criterion to predict mode II fracture of hot mix asphalt in terms of mode I results – a statistical analysis. Construction and Building Materials, 213, 483–491.
   Web of Science ®Google Scholar
• Garba, R., 2002. Permanent deformation properties of asphalt concrete mixtures.
   Google Scholar
• Ge, D., et al., 2018. The laboratory performance of asphalt mixture with amorphous poly alpha olefins (APAO) modified asphalt binder. Construction and Building Materials, 188, 676–684.
   Web of Science ®Google Scholar
• Hajikarimi, P., Rahi, M., and Moghadas Nejad, F., 2015. Comparing different rutting specification parameters using high temperature characteristics of rubber-modified asphalt binders. Road Materials and Pavement Design, 16 (4), 751–766.
   Web of Science ®Google Scholar
• Han, Z., et al., 2017. Study on the optimum rice husk ash content added in asphalt binder and its modification with bio-oil. Construction and Building Materials, 147, 776–789.
   Web of Science ®Google Scholar
• Huang, J., et al., 2021. Towards the potential usage of eggshell powder as bio-modifier for asphalt binder and mixture: workability and mechanical properties. International Journal of Pavement Engineering, 1–13.
   Web of Science ®Google Scholar
• Huang, B., Shu, X., and Chen, X., 2007. Effects of mineral fillers on hot-mix asphalt laboratory-measured properties. International Journal of Pavement Engineering, 8 (1), 1–9.
   Google Scholar
• Jamshidi, A., Hasan, M. R. M., and Lee, M. T., 2018. Comparative study on engineering properties and energy efficiency of asphalt mixes incorporating fly ash and cement. Construction and Building Materials, 168, 295–304.
   Web of Science ®Google Scholar
• Javid, M. and Rahim, A., 2016. Characterization of visco-elastic properties of locally available asphalts in Pakistan. Pakistan Journal of Engineering and Applied Sciences, 9 (2011), 17–23.
   Google Scholar
• Kandhal, P. S, 1993. Waste materials in hot mix asphalt – an overview. Use of waste materials in hot-mix asphalt. ASTM International.
   Google Scholar
• Kaymanesh, M. R., Ziari, H., and Damyar, B., 2017. Effect of waste EVA and waste CR on high temperature performance of bitumen. Petroleum Science and Technology, 35 (15), 1537–1541.
   Web of Science ®Google Scholar
• Kim, Y.-R., et al., 2008. Evaluation of moisture damage mechanisms and effects of hydrated lime in asphalt mixtures through measurements of mixture component properties and performance testing. Journal of Materials in Civil Engineering, 20 (10), 659–667.
   Web of Science ®Google Scholar
• Korayem, A. H., et al., 2018. Rutting and fatigue performance of asphalt mixtures containing amorphous carbon as filler and binder modifier. Construction and Building Materials, 188, 905–914.
   Web of Science ®Google Scholar
• Korayem, A. H., et al., 2020. Laboratory evaluation of stone mastic asphalt containing amorphous carbon powder as filler material. Construction and Building Materials, 243, 118280.
   Web of Science ®Google Scholar
• Kumar, P. and Garg, R., 2011. Rheology of waste plastic fibre-modified bitumen. International Journal of Pavement Engineering, 12 (5), 449–459.
   Web of Science ®Google Scholar
• Lavin, P, 2003. Asphalt pavements: a practical guide to design, production and maintenance for engineers and architects. 1st Edition London: CRC Press.
   Google Scholar
• Leng, Z., et al., 2019. Improvement of storage stability of SBS-modified asphalt with nanoclay using a new mixing method. Road Materials and Pavement Design, 20 (7), 1601–1614.
   Web of Science ®Google Scholar
• Lesueur, D, 2009. The colloidal structure of bitumen: consequences on the rheology and on the mechanisms of bitumen modification. Advances in Colloid and Interface Science, 145 (1), 42–82.
   PubMed Web of Science ®Google Scholar
• Liu, K., et al., 2021. The accumulated stress damage and residual life prediction of unreinforced concrete pavement with electric heating pipes. Construction and Building Materials, 278, 122258.
   Web of Science ®Google Scholar
• Modarres, A., Rahmanzadeh, M., and Ayar, P., 2015. Effect of coal waste powder in hot mix asphalt compared to conventional fillers: mix mechanical properties and environmental impacts. Journal of Cleaner Production, 91, 262–268.
   Web of Science ®Google Scholar
• Nakhaei, M., et al., 2019. Aging evaluation of amorphous carbon-modified asphalt binders using rheological and chemical approach. Journal of Materials in Civil Engineering, 32 (1), 04019321.
   Web of Science ®Google Scholar
• Park, Y. J. and Heo, J., 2002. Vitrification of fly ash from municipal solid waste incinerator. Journal of Hazardous Materials, 91 (1–3), 83–93.
   PubMed Web of Science ®Google Scholar
• Rahi, M., et al., 2015. Rutting characteristics of styrene-ethylene/propylene-styrene polymer modified asphalt. Journal of Materials in Civil Engineering, 27 (4), 04014154.
   Web of Science ®Google Scholar
• Read, J. and Whiteoak, D., 2003. The shell bitumen handbook. Fifth Edition London: Thomas Telford.
   Google Scholar
• Roberts, F. L., et al., 1991. Hot mix asphalt materials, mixture design and construction. Lanham, Maryland: NAPA Research and Education Foundation.
   Google Scholar
• Rongali, U. D., Swamy, A. K., and Jain, P. K., 2016. Effect of SBS and HDPH polymer on rheological properties of asphalt. Petroleum Science and Technology, 34 (21), 1790–1796.
   Web of Science ®Google Scholar
• Shafabakhsh, G. and Ani, O. J., 2015. Experimental investigation of effect of nano TiO2/SiO2 modified bitumen on the rutting and fatigue performance of asphalt mixtures containing steel slag aggregates. Construction and Building Materials, 98, 692–702.
   Web of Science ®Google Scholar
• Shishehboran, M., et al., 2021. Environmental and mechanical impacts of waste incinerated acidic sludge ash as filler in hot mix asphalt. Case Studies in Construction Materials, 14, e00504.
   Google Scholar
• Tayfur, S., Ozen, H., and Aksoy, A., 2007. Investigation of rutting performance of asphalt mixtures containing polymer modifiers. Construction and Building Materials, 21 (2), 328–337.
   Web of Science ®Google Scholar
• Witzcak, M. W, 2002. Simple performance test for superpave mix design. Transportation Research Board.
   Google Scholar
• Xu, P., et al., 2019. The effect of retreated coal wastes as filler on the performance of asphalt mastics and mixtures. Construction and Building Materials, 203, 9–17.
   Web of Science ®Google Scholar
• Xue, Y., et al., 2009. Utilization of municipal solid waste incineration ash in stone mastic asphalt mixture: pavement performance and environmental impact. Construction and Building Materials, 23 (2), 989–996.
   Web of Science ®Google Scholar
• Yaacob, H., et al., 2016. Rheological properties of styrene butadiene rubber modified bitumen binder. Jurnal Teknologi, 78 (7-2), 121–126.
   Web of Science ®Google Scholar
• Yusuf, R. O., et al., 2012. Use of sewage sludge ash (SSA) in the production of cement and concrete – a review. International Journal of Global Environmental Issues, 12 (2–4), 214–228.
   Google Scholar
• Ziari, H., et al., 2017. Evaluating the effect of amorphous carbon powder on moisture susceptibility and mechanical resistance of asphalt mixtures. Construction and Building Materials, 152, 182–191.
   Web of Science ®Google Scholar
• Ziari, H., et al., 2019. Investigating the effect of amorphous carbon powder on the moisture sensitivity, fatigue performance and rutting resistance of rubberized asphalt concrete mixtures. Construction and Building Materials, 217, 62–72.
   Web of Science ®Google Scholar
• Ziari, H., et al., 2020. Crack resistance of hot mix asphalt containing different percentages of reclaimed asphalt pavement and glass fiber. Construction and Building Materials, 230, 117015.
   Web of Science ®Google Scholar
• Zou, X., et al., 2017. Evaluation and analysis of variance of storage stability of asphalt binder modified by nanotitanium dioxide. Advances in Materials Science and Engineering, 2017, 6319697.
   Web of Science ®Google Scholar