References
- Al-Qaili, A.H., and Al-Solieman, H, 2021. Enhancing MEPDG distress models prediction for Saudi Arabia by local calibration. Road Materials and Pavement Design, 23, 1–13.
- Al-Qaili, A.H., and Alsoliman, H.A, 2017. Preparing data for calibration of mechanistic-empirical pavement design guide in central Saudi Arabia. World Academy of Science, Engineering and Technology International Journal of Urban and Civil Engineering, 11 (2), 248–255. Available from: https://panel.waset.org/Publication/10006718.
- Ali, Y., et al., 2016. Investigation of factors affecting dynamic modulus and phase angle of various asphalt concrete mixtures. Materials and Structures, 49, 857–868.
- Bennert, T., 2009. Dynamic modulus of hot mix asphalt, final report. New Jersey: New Jersey Department of Transportation. Available from: https://rosap.ntl.bts.gov/view/dot/17674.
- Ceylan, H., et al., 2009. MEPDG work plan task No. 8: validation of pavement performance curves for the mechanistic-empirical pavement design guide. Iowa. Available from: http://lib.dr.iastate.edu/intrans_reports/66.
- Ceylan, H., Coree, B., and Gopalakrishnan, K, 2009. Evaluation of the mechanistic-empirical pavement design guide for implementation in Iowa. Baltic Journal of Road and Bridge Engineering, 4 (1), 5–12.
- Cross, S.A., Gibbe, R., and Aryal, N., 2011a. Development of flexible pavement database for local calibration of MEPDG: Part 2 evaluation of ODOT SMA mixtures. Oklahoma: Oklahoma Department of Transportation. Available from: https://trid.trb.org/view/1117042.
- Cross, S.A., Gibbe, R., and Aryal, N, 2011b. Development of flexible pavement database for local calibration of MEPDG. Development. Oklahoma.
- Cross, S.A., Jakatimath, Y., and Sumesh, KC, 2007. Determination of dynamic modulus master curves for Oklahoma HMA mixtures. Oklahoma: The Oklahoma Department of Transportation. Available from: https://rosap.ntl.bts.gov/view/dot/23201.
- Darter, M.I., et al., 2014. Calibration and implementation of the AASHTO mechanistic-empirical pavement design guide in Arizona. Arizona. Available from: https://rosap.ntl.bts.gov/view/dot/27993.
- Gassman, S.L., and Rahman, M.M., 2016. Calibration of the aashto pavement design guide to South Carolina conditions – phase I. South Carolina. Available from: https://rosap.ntl.bts.gov/view/dot/31115.
- General Directorate of Highways, 2008. Turkish flexible pavement design guide. Ankara: General Directorate of Highways.
- General Directorate of Highways, 2013. Highway technical specifications. 2013th ed. Ankara, Turkey: General Directorate of Highways. Available from: https://www.kgm.gov.tr/Sayfalar/KGM/SiteTr/Root/default.aspx.
- Huang, Y.H., 2004. Pavement analysis and design. 2nd ed. Upper Saddle River, N.J.: Pearson/Prentice Hall.
- Iii, S.B.C., Mohammad, L.N., and Elseifi, M.A, 2015. Dynamic modulus of asphalt mixtures: evaluation of effects on pavement performance prediction. Transportation Research Record: Journal of the Transportation Research Board, 2507 (1), 67–77. Available from: https://journals.sagepub.com/doi/10.31412507-08?icid=int.sj-abstract.similar-articles.3#articleCitationDownloadContainer.
- Kim, Y.R., et al., 2011. Local calibration of the MEPDG for flexible pavement design, final report. North Carolina. Available from: https://trid.trb.org/view/1141997.
- Li, J., Zofka, A., and Yut, I, 2012. Evaluation of dynamic modulus of typical asphalt mixtures in Northeast US Region. Road Materials and Pavement Design, 13 (2), 249–265.
- Mallela, J., et al., 2009. Implementing the aashto mechanistic – empirical pavement design guide in Missouri. Missouri.
- Mshali, M.R.S., and Steyn, W.J.M, 2020. Effect of truck speed on the response of flexible pavement systems to traffic loading. International Journal of Pavement Engineering, 0 (0), 1–13.
- Romero, M.J.M.-E., Tafur Garro, N.M., and Gallardo Zevallos, G, 2016. Implementation of the mechanistic-empirical pavement design in northern Peru using a calibration coefficient for the International Roughness Index. Construction and Building Materials, 102, 270–280.
- Schwartz, C.W., and Carvalho, R.L., 2007. Implementation of the NCHRP 1-37A design guide final report volume 2: evaluation of mechanistic-empirical design procedure. Maryland: Maryland State Highway Administration. Available from: https://www.fhwa.dot.gov/pavement/dgit/clearinghouse/implementation.cfm.
- Sebaaly, P., and Tabatabaee, N, 1993. Influence of vehicle speed on dynamic loads and pavement response. Journal of the Transportation Research Board, National Research Council, Transportation Research Record, 1410, 107–114. Available from: http://onlinepubs.trb.org/Onlinepubs/trr/1993/1410/1410-014.pdf.
- Sun, X., et al., 2015. Calibrating the mechanistic-empirical pavement design guide for Kansas. Kansas Department of Transportation. Available from: http://dmsweb.ksdot.org/AppNetProd/docpop/docpop.aspx?clienttype=html&docid=9016360.