Influence of bitumen foam characteristics on moisture susceptibility of foamed bitumen stabilised mixes

References

• AASHTO T 180, 2021. Standard method of test for moisture-density relations of soils using a 4.54-kg (10-lb) rammer and a 457-mm (18-in.) drop.
   Google Scholar
• Abreu, L., et al., 2017. Foamed bitumen : an alternative way of producing asphalt mixtures. Ciência & Tecnologia dos Materiais, 29 (1), e198–e203.
   Web of Science ®Google Scholar
• Acott, S.M., and Myburgh, P.A, 1983. Design and performance study of sand bases treated with foamed asphalt. Transportation Research Record, 898, 290–296.
   Google Scholar
• ARRA, 2017. Recommended mix design guidelines for cold recycling using foamed (expanded) asphalt recycling agent. Asphalt Recycling & Reclaiming Association, 21401.
   Google Scholar
• Asphalt Academy, 2009. A guideline for the design and construction of bitumen emulsion and foamed bitumen stabilised materials (TG2). 2nd ed.
   Google Scholar
• Asphalt Academy, 2020. A guideline for the design and construction of bitumen emulsion and foamed bitumen stabilised materials (TG2). 3rd ed. Southern African Bitumen Association (Sabita).
   Google Scholar
• ASTM C136, 2017. Standard test method for sieve analysis of fine and coarse aggregates. Annual Book of ASTM Standards.
   Google Scholar
• ASTM E691, 2021. Standard practice for conducting an interlaboratory study to determine the precision of a test method.
   Google Scholar
• Austroads, 2019. Guide to pavement technology Part 4D: stabilised materials.
   Google Scholar
• Bowering, R.H., and Martin, C.L, 1976. Foamed bitumen production and application of mixtures evaluation and performance of pavements. Association of Asphalt Paving Technologists, 45, 453–477.
   Google Scholar
• Caltrans, 2020. Guide for partial-and full-depth pavement recycling in California. Prepared by University of California Pavement Research Center, UC Davis and UC Berkeley.
   Google Scholar
• Chomicz-kowalska, A., Gardziejczyk, W., and Iwan, M.M, 2016. Moisture resistance and compactibility of asphalt concrete produced in half-warm mix asphalt technology with foamed bitumen. Construction and Building Materials Journal, 126, 108–118.
   Web of Science ®Google Scholar
• Chomicz-Kowalska, A., Mrugała, J., and Maciejewski, K, 2017. Evaluation of foaming performance of bitumen modified with the addition of surface active agent. IOP Conference Series: Materials Science and Engineering, 245 (3), 032086.
   Google Scholar
• Dukatz, E.L., and Pavlovich, R.D, 2000. Practical applications of precision statements. ASTM Committee D 04 Workshop on Precision and Bias. ASTM Committee D 04 Workshop on Precision and Bias, Atlanta.
   Google Scholar
• Ebels, L.J., 2008. Characterisation of Material properties and behaviour of cold bituminous mixtures for road pavements. Thesis (PhD). University of Stellenbosch.
   Google Scholar
• Fu, P., 2009. Micromechanics for foamed asphalt stabilized materials. Thesis (PhD). University of California Davis.
   Google Scholar
• Fu, P., et al., 2010. Investigation of the curing mechanism of foamed asphalt mixes based on micromechanics principles. Journal of Materials in Civil Engineering, 22 (1), 29–38.
   Web of Science ®Google Scholar
• Fu, P., Jones, D., and Harvey, J.T, 2011. The effects of asphalt binder and granular material characteristics on foamed asphalt mix strength. Construction and Building Materials, 25 (2), 1093–1101.
   Web of Science ®Google Scholar
• Gomes, F, 2009. Curso de estatística experimental (15.ed). Piracicaba: Esalq. 477p.
   Google Scholar
• Hailesilassie, B., 2016. Morphology characterization of foam bitumen and modeling for low temperature asphalt concrete. Thesis (PhD). KTH Royal Institute of Technology, Stockholm, Sweden.
   Google Scholar
• Hailesilassie, B.W., Hugener, M., and Partl, M.N, 2015. Influence of foaming water content on foam asphalt mixtures. Construction and Building Materials, 85, 65–77.
   Web of Science ®Google Scholar
• Hosmer, D.W., and Lemeshow, S, 2000. Applied logistic regression, 2nd ed. New York, NY: John Wiley and Sons, 160–164.
   Google Scholar
• IRC:120, 2015. Recommended practice for recycling of bituminous pavements. Indian roads congress.
   Google Scholar
• IS:1201-1220, 1978. Methods for testing tar and bituminous materials. Bureau of Indian Standards, 1st Revision.
   Google Scholar
• IS:73, 2013. Paving bitumen-specification (Fourth Revision), Indian Standard.
   Google Scholar
• Jenkins, K.J., 2000. Mix design considerations for cold and half-warm bituminous mixes with emphasis on foamed bitumen. Thesis (PhD), University of Stellenbosch.
   Google Scholar
• Jones, D., et al., 2009. Full-depth pavement reclamation with foamed asphalt in california: guidelines for project selection, design, and construction. Davis: Institute of Transportation Studies, University of California.
   Google Scholar
• Khalid, C, 2013. The use of foamed bitumen in the recycling of asphalt pavements. WIT Transactions on State-of-the-art in Science and Engineering, 77, 263–272.
   Google Scholar
• Khatib, J, 2016. Sustainability of construction materials. 2nd ed Woodhead Publishing, United Kingdom. doi:10.1016/C2014-0-02849-3.
   Google Scholar
• Kim, Y., and Lee, H.D, 2006. Development of mix design procedure for cold in-place recycling with foamed asphalt. Journal of Materials in Civil Engineering, 18 (1), 116–124.
   Web of Science ®Google Scholar
• Koenders, B.G., et al., 2000. Innovative process in asphalt production and application to obtain lower operating temperatures. Paper presented at the 2nd Eurasphalt & Eurobitume Congress Barcelona.
   Google Scholar
• Kvasnak, A.N., and West, R.C., 2009. Case study of warm-mix asphalt moisture susceptibility in Birmingham, Alabama. Transportation Research Board 88th Annual Meeting, Washington, DC.
   Google Scholar
• Lancaster, J., McArthurn, L., and Warwick, R, 1994. VIC roads experience with foamed bitumen stabilisation. Proceedings 17th ARRB Conference, Part 3. 193–211.
   Google Scholar
• Lee, D.Y., 1981. Treating marginal aggregates and soil with foamed asphalt. Association of Asphalt Paving Technologists.
   Google Scholar
• Lesueur, D., Clech, H., and Brosseaud, A, 2004. Foamed bitumen : foamability and foam stability. Road Materials and Pavement Design, 5 (3), 277–302.
   Google Scholar
• Li, N., et al., 2020. Investigation of moisture dissipation of water-foamed asphalt and its influence on the viscosity. Materials, 13 (23), 1–11.
   Web of Science ®Google Scholar
• Lu, G., et al., 2021. Rheological behavior of warm mix asphalt modified with foaming process and surfactant additive. Crystals, 11 (4), 1–14.
   Web of Science ®Google Scholar
• Maccarrone, S., et al., 1994. Pavement recycling using foamed bitumen. 17th ARRB Conference, Queensland, 349–365.
   Google Scholar
• Martinez-Arguelles, G., et al., 2015. Laboratory investigation on mechanical performance of cold foamed bitumen mixes: bitumen source, foaming additive, fiber-reinforcement and cement effect. Construction and Building Materials, 93, 241–248.
   Web of Science ®Google Scholar
• Mobil Oil Australia Ltd, 1971. Foamed bitumen: a new development. Technical Bulletin.
   Google Scholar
• Muthen, K.M, 1998. Foamed asphalt mixes Mix design procedure. Transportation Research Record, 898, 290–296.
   Google Scholar
• Namutebi, M., 2011. Some aspects of foamed bitumen technology. Thesis (PhD). Royal Institute of Technology Stockholm.
   Google Scholar
• Newcomb, D.E., et al., 2015. Properties of foamed asphalt for warm mix asphalt applications (NCHRP report 807). Washington, DC: Transportation Research Board.
   Google Scholar
• Ozturk, H., 2013. Quantification of quality of foamed warm mix asphalt binders and mixtures. Thesis (PhD). Michigan State University.
   Google Scholar
• Ruckel, P.J., Acott, S.M., and Bowering, R.H, 1983. Foamed-Asphalt paving mixtures: preparation of design mixes and treatment of test specimens. Transportation Research Record, 911, 88–95.
   Google Scholar
• Saleh, M., 2006. Characterisation of foam bitumen quality and the mechanical properties of foam stabilised mixes. 10th International Conference on Asphalt Pavements (CD-Rom). Quebec City, Canada.
   Google Scholar
• Sunarjono, S., 2008. The influence of foamed bitumen characteristics on cold-mix asphalt properties. Thesis (PhD), University of Nottingham.
   Google Scholar
• Theyse, H., 2003. First level analysis report: HVS testing of the foamed-bitumen-treated crushed stone base on the N7 (TR11/1) near Cape Town.
   Google Scholar
• Twagira, E.M., 2010. Influence of durability properties on performance of bitumen stabilized materials. Thesis (PhD). Stellenbosch University, South Africa.
   Google Scholar
• Unal, I, 2017. Defining an optimal Cut-point value in ROC analysis: an alternative approach. Computational and Mathematical Methods in Medicine, 2017, 1–14.
   Web of Science ®Google Scholar
• Wirtgen, 2012. Wirtgen cold recycling technology.
   Google Scholar
• Yin, F., Arámbula-mercado, E., and Newcomb, D, 2016. Mix design procedure for foamed asphalt mixtures. Road Materials and Pavement Design, 17 (4), 946–957.
   Web of Science ®Google Scholar