References
- Abdul Hassan, N., Airey, G.D., and Hainin, M.R., 2014. Characterisation of micro-structural damage in asphalt mixtures using image analysis. Construction and Building Materials, 54, 27–38.
- Aboufoul, M., et al., 2019. Virtual porous materials to predict the air void topology and hydraulic conductivity of asphalt roads. Powder Technology, 352, 294–304.
- Aboufoul, M., and Garcia, A., 2017. Influence of air voids characteristics on the hydraulic conductivity of asphalt mixture. Road Materials and Pavement Design, 18 (sup2), 39–49.
- Alvarez, A.E., Martin, A.E., and Estakhri, C., 2010. Internal structure of compacted permeable friction course mixtures. Construction and Building Materials, 24 (6), 1027–1035.
- Alvarez, A.E., Mora, J.C., and Espinosa, L. V., 2018. Quantification of stone-on-stone contact in permeable friction course mixtures based on image analysis. Construction and Building Materials, 165, 462–471.
- Arambula, E., Masad, E., and Martin Amy, E., 2007. Influence of air void distribution on the moisture susceptibility of asphalt mixes. Journal of Materials in Civil Engineering, 19 (8), 655–664.
- Baychev, T.G., et al., 2019. Reliability of algorithms interpreting topological and geometric properties of porous media for pore network modelling. Transport in Porous Media, 128 (1), 271–301.
- Castillo, D., et al., 2015. Studying the effect of microstructural properties on the mechanical degradation of asphalt mixtures. Construction and Building Materials, 93, 70–83.
- Che, T., et al., 2021. Relationship between air voids and permeability: effect on water scouring resistance in HMA. Journal of Materials in Civil Engineering, 33 (4), 4021022.
- Chen, J., et al., 2020a. Analysis of pore characteristics and flow pattern of open-graded asphalt mixture in different directions. Journal of Materials in Civil Engineering, 32 (9), 4020256.
- Chen, J., et al., 2020b. Directional distribution of three-dimensional connected voids in porous asphalt mixture and flow simulation of permeability anisotropy. International Journal of Pavement Engineering, 21 (12), 1550–1562.
- Chen, S., et al., 2021. Influence of air void structures on the coefficient of permeability of asphalt mixtures. Powder Technology, 377, 1–9.
- Chen, A., et al., 2022. Characterisation of fatigue damage in asphalt mixtures using X-ray computed tomography. Road Materials and Pavement Design, 1–19.
- Chen, S., Adhikari, S., and You, Z., 2019. Relationship of coefficient of permeability, porosity, and air voids in fine-graded HMA. Journal of Materials in Civil Engineering, 31 (1), 4018359.
- Coleri, E., et al., 2012. A micromechanical approach to investigate asphalt concrete rutting mechanisms. Construction and Building Materials, 30, 36–49.
- Coleri, E., et al., 2013a. Micromechanical investigation of open-graded asphalt friction courses’ rutting mechanisms. Construction and Building Materials, 44, 25–34.
- Coleri, E., et al., 2013b. Investigation of asphalt concrete rutting mechanisms by X-ray computed tomography imaging and micromechanical finite element modeling. Materials and Structures, 46 (6), 1027–1043.
- Deng, H., et al., 2019. Evaluation of high-temperature deformation of porous asphalt mixtures based on microstructure using X-ray computed tomography. Construction and Building Materials, 227, 116623.
- Dong, H., 2007. Micro-CT imaging and pore network extraction. Thesis (PhD). Imperial College London.
- Dong, H., and Blunt, M.J., 2009. Pore-network extraction from micro-computerized-tomography images. Physical Review E, 80 (3), 36307.
- Gao, L., et al., 2015. Characterization of air voids in cold in-place recycling mixtures using X-ray computed tomography. Construction and Building Materials, 84, 429–436.
- Gerke, K.M., et al., 2020. Improving watershed-based pore-network extraction method using maximum inscribed ball pore-body positioning. Advances in Water Resources, 140, 103576.
- Giuliani, F., et al., 2021. Advancement in measuring the hydraulic conductivity of porous asphalt pavements. Construction and Building Materials, 300, 124110.
- Hu, J., et al., 2015. High-temperature failure in asphalt mixtures using micro-structural investigation and image analysis. Construction and Building Materials, 84, 136–145.
- Hu, J., et al., 2016. Investigation on fatigue damage of asphalt mixture with different air-voids using microstructural analysis. Construction and Building Materials, 125, 936–945.
- Hu, J., et al., 2020. Investigation on the permeability of porous asphalt concrete based on microstructure analysis. International Journal of Pavement Engineering, 21 (13), 1683–1693.
- Huang, W., et al., 2020. Influence of nominal maximum aggregate size and aggregate gradation on pore characteristics of porous asphalt concrete. Materials, 13 (6), 1355.
- Kassem, E., et al., 2008. Evaluation of full-depth asphalt pavement construction using X-ray computed tomography and ground penetrating radar. Journal of Performance of Constructed Facilities, 22 (6), 408–416.
- Khan, R., et al., 2013. Moisture damage in asphalt mixtures using the modified SATS test and image analysis. Construction and Building Materials, 43, 165–173.
- Khan, R., and Collop, A.C., 2010. The use of X-ray computed tomography to characterize microdamage in asphalt. Road Materials and Pavement Design, 11 (sup1), 89–109.
- Lal, S., et al., 2017. Wetting and drying in hydrophobic, macroporous asphalt structures. Construction and Building Materials, 152, 82–95.
- Li, Q., et al., 2017. Evaluation of microstructure and damage evolution for asphalt pavements in an advanced repeated load permanent deformation test using X-ray computed tomography. Road Materials and Pavement Design, 18 (5), 1135–1158.
- Li, X., et al., 2020. Homogeneity evaluation of hot in-place recycling asphalt mixture using digital image processing technique. Journal of Cleaner Production, 258, 120524.
- Liu, P., et al., 2019. Primary investigation on the relationship between microstructural characteristics and the mechanical performance of asphalt mixtures with different compaction degrees. Construction and Building Materials, 223, 784–793.
- Lu, G., et al., 2020. Investigation of the hydraulic properties of pervious pavement mixtures: characterization of darcy and non-darcy flow based on pore microstructures. Journal of Transportation Engineering, Part B: Pavements, 146 (2), 4020012.
- Ma, T., et al., 2016. Effect of air voids on the high-temperature creep behavior of asphalt mixture based on three-dimensional discrete element modeling. Materials & Design, 89, 304–313.
- Ma, X., et al., 2020. High-temperature failure of porous asphalt mixture under wheel loading based on 2D air void structure analysis. Construction and Building Materials, 252, 119051.
- Ma, X., et al., 2021. Characterization of the interconnected pore and its relationship to the directional permeability of porous asphalt mixture. Construction and Building Materials, 269, 121233.
- Mahmud, M.Z.H., et al., 2017. Microstructural investigation on air void properties of porous asphalt using virtual cut section. Construction and Building Materials, 155, 485–494.
- Masad, E., et al., 1999. Internal structure characterization of asphalt concrete using image analysis. Journal of Computing in Civil Engineering, 13 (2), 88–95.
- Masad, E., et al., 2002. Characterization of air void distribution in asphalt mixes using X-ray computed tomography. Journal of Materials in Civil Engineering, 14 (2), 122–129.
- Ministry of Transport, 2011. Standard test methods of bitumen and bituminous mixtures for highway engineering (JTG E20–2011). Beijing: China Communication Press. (in Chinese).
- Moslemipour, A., and Sadeghnejad, S., 2021. Dual-scale pore network reconstruction of vugular carbonates using multi-scale imaging techniques. Advances in Water Resources, 147, 103795.
- Onifade, I., et al., 2016. Towards asphalt mixture morphology evaluation with the virtual specimen approach. Road Materials and Pavement Design, 17 (3), 579–599.
- Osmari, P.H., et al., 2020. Determination of volumetric characteristics of FAM mixtures using X-ray micro-computed tomography and their effects on the rheological behavior of the material. Transportation Research Record, 2674 (5), 97–107.
- Partl, M.N., Flisch, A., and Jönsson, M., 2007. Comparison of laboratory compaction methods using X-ray computer tomography. Road Materials and Pavement Design, 8 (2), 139–164.
- Schuck, B., et al., 2021. Study of air void topology of asphalt with focus on air void constrictions – a review and research approach. Road Materials and Pavement Design, 22 (sup1), S425–S443.
- Senior-Arrieta, V., and Graciano, C., 2021. Experimental investigation on the rutting resistance of permeable friction courses. Construction and Building Materials, 268, 121210.
- Silin, D.B., Jin, G., and Patzek, T.W., 2003. Robust determination of the pore space morphology in sedimentary rocks. In: Dennis Denney, ed. SPE annual technical conference and exhibition. Denver, CO: OnePetro, SPE-84296-MS.
- Silin, D., and Patzek, T., 2006. Pore space morphology analysis using maximal inscribed spheres. Physica A: Statistical Mechanics and its Applications, 371 (2), 336–360.
- Tarefder, R.A., and Ahmad, M., 2017. Evaluation of pore structure and its influence on permeability and moisture damage in asphalt concrete. International Journal of Pavement Engineering, 18 (3), 274–283.
- Tashman, L., et al., 2002. X-ray tomography to characterise air void distribution in superpave gyratory compacted specimens. International Journal of Pavement Engineering, 3 (1), 19–28.
- Tashman, L., et al., 2004. Damage evolution in triaxial compression tests of HMA at high temperatures (with discussion). Journal of the Association of Asphalt Paving Technologists, 73, 53–87.
- Thyagarajan, S., et al., 2010. The heterogeneity and mechanical response of hot mix asphalt laboratory specimens. International Journal of Pavement Engineering, 11 (2), 107–121.
- Tomoto, T., and Moriyoshi, A., 2009. Evaluation of damage to asphalt pavements using a micro-focus CT scanner and three-dimensional crack analysis. Road Materials and Pavement Design, 10 (3), 519–543.
- Walubita, L.F., et al., 2020. Correlating the HWTT laboratory test data to field rutting performance of in-service highway sections. Construction and Building Materials, 236, 117552.
- Walubita, L.F., Jamison, B., and Alvarez, A.E., 2012. Air void characterisation of HMA gyratory laboratory-moulded samples and field cores using X-ray computed tomography (X-ray CT). Journal of the South African Institution of Civil Engineering = Joernaal van die Suid-Afrikaanse Instituut van Siviele Ingenieurswese, 54 (1), 22–31.
- Walubita, L.F., Liu, W., and Scullion, T., 2010. Texas perpetual pavements: experience overview and the way forward (No. FHWA/TX-10/0-4822-3). Austin, TX, USA: Texas Transportation Institute.
- Walubita, L.F., and Scullion, T., 2007. Perpetual pavements in Texas: the fort worth SH 114 project in wise county (No. FHWA/TX-07/0-4822-2). San Antonio, TX, USA: Texas Transportation Institute.
- Wang, L.B., et al., 2003. Quantification of damage parameters using X-ray tomography images. Mechanics of Materials, 35 (8), 777–790.
- Wang, X., et al., 2020. Three-Stage evolution of air voids and deformation of porous-asphalt mixtures in high-temperature permanent deformation. Journal of Materials in Civil Engineering, 32 (9), 04020233.
- Zelelew, H.M., and Papagiannakis, A.T., 2011. A volumetrics thresholding algorithm for processing asphalt concrete X-ray CT images. International Journal of Pavement Engineering, 12 (6), 543–551.
- Zhang, Y., et al., 2014. Crack initiation in asphalt mixtures under external compressive loads. Construction and Building Materials, 72, 94–103.
- Zhang, H., Wang, Y., and Zhao, Q., 2021. Micro-structural evolution of porous asphalt mixture and its influence to key behaviour based on loading action. International Journal of Pavement Engineering, 23 (8), 2796–2808.
- Zhao, Y., et al., 2019. Characterization of interconnectivity, size distribution and uniformity of air voids in porous asphalt concrete using X-ray CT scanning images. Construction and Building Materials, 213, 182–193.
- Zheng, C., et al., 2021. Study on the microscopic damage of porous asphalt mixture under the combined action of hydrodynamic pressure and ice crystal frost heave. Construction and Building Materials, 303, 124489.
- Zhu, J., et al., 2021. Effect of aggregate structure on load-carrying capacity and deformation resistance of porous asphalt concrete based on discrete-element modelling. International Journal of Pavement Engineering, 1–11.