199
Views
1
CrossRef citations to date
0
Altmetric
Research Article

Comparison of accelerated laboratory curing and maturation under uncontrolled conditions of gravel emulsions using a nonlinear weighted least-squares predictive model

ORCID Icon, ORCID Icon, ORCID Icon, ORCID Icon & ORCID Icon
Article: 2144309 | Received 27 May 2022, Accepted 31 Oct 2022, Published online: 14 Nov 2022

References

  • AENOR, 1994. UNE 103501:1994. Geotechnics. Compaction test. Modified Proctor.
  • AENOR, 2005. EN 933-5:1999/A1:2005. Tests for geometrical properties of aggregates. Part 5: Determination of percentage of crushed and broken surfaces in coarse aggregate particles. Madrid, Spain (in Spanish).
  • AENOR, 2012. EN 933-3:2012. Tests for geometrical properties of aggregates. Part 3: Determination of particle shape. Flakiness index. Madrid, Spain (in Spanish).
  • AENOR, 2013. EN 13808:2013/1M:2014. Bitumen and bituminous binders. Framework for specifying cationic bituminous emulsions. Madrid, Spain (in Spanish).
  • AENOR, 2014. EN 1097-6:2014. Tests for mechanical and physical properties of aggregates. Part 6: Determination of particle density and water absorption. Madrid, Spain (in Spanish).
  • AENOR, 2015. EN 933-8:2012 + A1:2015. Tests for geometrical properties of aggregates. Part 8: Assessment of fines. Sand equivalent test. Madrid, Spain (in Spanish).
  • AENOR, 2019a. EN 12697-26:2019. Bituminous mixtures. Test methods. Part 26: Stiffness. Madrid, Spain (in Spanish).
  • AENOR, 2019b. EN 12697-12 Asphalt mixtures. Test methods for hot mix asphalt. Determination of the water sensitivity of bituminous specimens. Madrid, Spain (in Spanish).
  • AENOR, 2020. Asphalt mixtures. Test methods for hot mix asphalt. Determination of the maximum density. Madrid, Spain (in Spanish).
  • AENOR, 2021. EN 1097-2:2021. Tests for mechanical and physical properties of aggregates. Part 2: Methods for the determination of resistance to fragmentation. Madrid, Spain (in Spanish).
  • Al-Busaltan, S., et al., 2012. Mechanical properties of an upgrading cold-Mix asphalt using waste materials. Journal of Materials in Civil Engineering, 24 (12), 1484–1491.
  • Asphalt Institute, 1989. Asphalt Cold Mix Manual. Manual Series No. 14 (MS-14). Third Edit. Lexington, Kentucky, USA.
  • ATEB, n.d.a. Monografía gravaemulsión.
  • ATEB, n.d.b. Gravel emulsion sheet. (in Spanish).
  • Bardesi, A., 1994. From stabilization with emulsion to gravel-emulsion. In: 21st Annual Meeting of the Asphalt Emulsion Manufacturers Association.
  • Beghin, A., et al., 2012. Comportement et étude des graves-émulsion Coopération public-privé: Mûrissement et évolution temporelle des propriétés de l’enrobé et des caractéristiques du liant. Revue Générale des Routes, 902, 54.
  • Bordes, P., et al., 1987. L’entretien Courant Des Chaussees-Guide Pratique.
  • Le Bouteiller, E., 2010. Asphalt emulsions for sustainable pavements. In: First International Conference on Pavement Preservation. Newport Beach.
  • Bullen, F., Brennan, M.J., and Curtin, B., 1994. The possible use of grave-emulsion in Australia. In: 17TH ARRB CONFERENCE, GOLD COAST, QUEENSLAND, 15-19 AUGUST 1994; PROCEEDINGS; VOLUME 17, PART 3.
  • Cardone, F., et al., 2015. Curing and temperature sensitivity of cement-bitumen treated materials. International Journal of Pavement Engineering, 16 (10), 868–880.
  • Casillas, S., and Braham, A, 2021. Quantifying effects of laboratory curing conditions on workability, compactability, and cohesion gain of cold in-place recycling. Road Materials and Pavement Design, 22 (10), 2329–2351.
  • CEN, 2019. EN 13108-31. Bituminous mixtures - Material specifications - Part 31: Asphalt Concrete with Bituminous Emulsion.
  • Charentais, L., n.d. Liants charentais [online].
  • Chen, Z., et al., 2021. Strength development and deterioration mechanisms of foamed asphalt cold recycled mixture based on MD simulation. Construction and Building Materials, 269.
  • Day, D., Lancaster, I.M., and McKay, D, 2019. Emulsion cold mix asphalt in the UK: A decade of site and laboratory experience. Journal of Traffic and Transportation Engineering (English Edition), 6 (4), 359–365.
  • Dulaimi, A., et al., 2016. Microanalysis of alkali-activated binary blended cementitious filler in a novel cold binder course mixture. In: 38th international conference on cement microscopy. Lyon, France.
  • Englezos, P., and Kalogerakis, N, 2000. Applied parameter estimation for chemical engineers. CRC Press.
  • Ferrotti, G., et al., 2020. Comparing the field and laboratory curing behaviour of cold recycled asphalt mixtures for binder courses. Materials, 13 (21), 4697.
  • Graziani, A., et al., 2017. An application of the Michaelis–Menten model to analyze the curing process of cold recycled bituminous mixtures. International Journal of Pavement Research and Technology, 10 (1), 62–74.
  • Graziani, A., et al., 2016. Effect of curing on the physical and mechanical properties of cold-recycled bituminous mixtures. Materials & Design, 95, 358–369.
  • Grilli, A., Mignini, C., and Graziani, A., 2019. Field Behaviour of Cold-Recycled Asphalt Mixtures for Binder Courses. International Conference on Sustainable Materials, Systems and Structures (SMSS 2019) New Generation of Construction Materials, (May), 100–107.
  • Hussan, S., et al., 2020. Modelling asphalt pavement analyzer rut depth using different statistical techniques. Road Materials and Pavement Design, 21 (1), 117–142.
  • Iglewicz, B. and Hoaglin, D., 1993. Volume 16: How to detect and handle outliers. In: E.F. Mykytka, ed. The ASQC basic references in quality control: statistical techniques.
  • Jenkins, K.J., and Moloto, P.K, 2008. Updating bituminous stabilized materials guidelines: mix design report. Phase II – Curing protocol: Improvement. Technical memorandum task 7.
  • Jones, D., Wu, R., and Louw, S., 2014. June 2014 Research Report : UCPRC-RR-2014-03 Authors : PREPARED FOR :, (June).
  • Junta de Andalucía, 2007. Instruction for the design of pavements of the road network of Andalusia.
  • Junta de Castilla y León, 2004. Project and construction recommendations for pavements.
  • Kim, Y., Im, S., and Lee, H. “David”, 2011. Impacts of curing time and moisture content on engineering properties of cold In-place recycling mixtures using foamed or emulsified asphalt. Journal of Materials in Civil Engineering, 23 (5), 542–553.
  • Kim, Y., Lee, H. “David”, and Heitzman, M., 2007. Validation of New Mix design procedure for cold In-place recycling with foamed asphalt. Journal of Materials in Civil Engineering, 19 (11), 1000–1010.
  • Konrad, J.M., and Walter, J, 2001. Influence of curing on the mechanical properties of a dense graded emulsion Mix. Road Materials and Pavement Design, 2 (2), 181–194.
  • Lafon, J., and Puggelli, M., 1997. Les Graves Emulsion. Note D’information Chaussees Dependances, (97).
  • Leech, D., 1994. Cold Asphalt Materials for Use in the Structural Layers of Roads. Project Report 75. U.K.
  • Li, R., et al., 2020. Characterization and correlation analysis of mechanical properties and electrical resistance of asphalt emulsion cold-mix asphalt. Construction and Building Materials, 263.
  • Michaelis, L., et al., 1913. Die Kinetik der Invertinwirkung/ The kinetics of invertase action. Biochemistry, 49 (2), 333–369.
  • MOPT, 1995. Public Works and Transportation Ministry. NLT-145/95. Coating of the aggregates with bituminous emulsions. NLT Standards. Road Test. Second Edi. Madrid, Spain (in Spanish).
  • MOPT, 2000. Public Works and Transportation Ministry. NLT-162/00. Effect of water on the cohesion of compacted bituminous mixtures. (immersion-compression test). NLT Standards. Road Test. Second Edi. Madrid, Spain (in Spanish).
  • Needham, D, 1996. Developments in bitumen emulsion mixtures for roads. University of Nottingham.
  • Nikolaides, A.F, 1983. Design of dense graded cold bituminous emulsion mixtures and evaluation of their engineering properties. University of Leeds.
  • Ojum, C.K., 2015. The design and optimisation of cold asphalt emulsion mixtures. PhD thesis, University of Nottingham., (June), 1–233.
  • Orosa, P., Pérez, I., and Pasandín, A.R, 2022. Short-term resilient behaviour and its evolution with curing in cold in-place recycled asphalt mixtures. Construction and Building Materials, 323, 126559.
  • Ozsahin, T.S., and Oruc, S, 2008. Neural network model for resilient modulus of emulsified asphalt mixtures. Construction and Building Materials, 22 (7), 1436–1445.
  • Pérez, I., et al., 2021. Enhancement of curing properties of cold in-place recycling asphalt mixtures by induction heating. International Journal of Pavement Engineering, 22 (3), 355–368.
  • Serfass, J.P., et al., 2012. A detailed assessment of grave-emulsion combining trial section monitoring and laboratory testing. 5th Eurasphalt & Eurobitume Congress, 11p.
  • Serfass, J.P., et al., 2004. Influence of curing on cold mix mechanical performance. Materials and Structures/Materiaux et Constructions, 37 (269), 365–368.
  • Shanbara, H.K., et al., 2021. The future of eco-friendly cold mix asphalt. Renewable and Sustainable Energy Reviews, 149 (May.
  • Tebaldi, G., et al., 2014. Synthesis of standards and procedures for specimen preparation and in-field evaluation of cold-recycled asphalt mixtures. Road Materials and Pavement Design, 15 (2), 272–299.
  • Wirtgen GmbH, 2012. Wirtgen cold recycling technology. Wirtgen Cold Recycling Technology, 367.
  • Yang, W., et al., 2021. Effect of curing and compaction on volumetric and mechanical properties of cold-recycled mixture with asphalt emulsion under different cement contents. Construction and Building Materials, 297.
  • Yang, X., and You, Z, 2015. New predictive equations for dynamic modulus and phase angle using a nonlinear least-squares regression model. Journal of Materials in Civil Engineering, 27 (3), 04014131.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.