Thermal cracking in cold regions’ asphalt mixtures prepared using high polymer modified binders and softening agents

References

• Ahmed, R.B, and Hossain, K, 2020. Waste cooking oil as an asphalt rejuvenator: A state-of-the-art review. Construction and Building Materials, 230, 116985. doi:10.1016/j.conbuildmat.2019.116985.
   Web of Science ®Google Scholar
• Al-Adham, K., and Wahhab, H.A.-A, 2018. Influence of temperature on Jnr values of polymer modified asphalt binders. International Journal of Pavement Research and Technology, 11 (6), 603–610. doi:10.1016/j.ijprt.2018.01.001.
   Google Scholar
• Ali, A., et al., 2022. Laboratory performance of dense graded asphalt mixtures prepared using highly polymer modified binders containing corn oil as softening agent. Construction and Building Materials, 345, 128336. doi:10.1016/j.conbuildmat.2022.128336.
   Web of Science ®Google Scholar
• Ali, A.W., et al., 2016. Investigation of the impacts of aging and RAP percentages on effectiveness of asphalt binder rejuvenators. Construction and Building Materials, 110, 211–217. doi:10.1016/j.conbuildmat.2016.02.013.
   Web of Science ®Google Scholar
• Asib, A.S.M., and Romero, P, 2022. A long-term field study of the ability to predict thermal cracking of asphalt mixtures tested by the Bending Beam Rheometer. Road Materials and Pavement Design, 23 (7), 1633–1649. doi:10.1080/14680629.2021.1910550.
   Web of Science ®Google Scholar
• Bowers, B.F, Diefenderfer, B.K, and Diefenderfer, S.D, 2018. Evaluation of highly polymer-modified asphalt mixtures: Phase I.
   Google Scholar
• Doré, G., and Zubeck, H.K, 2009. Cold regions pavement engineering.
   Google Scholar
• Elkashef, M., and Williams, R.C., 2017. Improving fatigue and low temperature performance of 100% RAP mixtures using a soybean-derived rejuvenator. Construction and Building Materials, 151, 345–352.
   Web of Science ®Google Scholar
• Faisal Kabir, S, and Fini, E.H., 2021. Investigating aging and rejuvenation mechanism of biomodified rubberized bitumen. Journal of Materials in Civil Engineering, 33 (7), 04021142.
   Web of Science ®Google Scholar
• Fournier, P, 2010. Georgia DOT chooses highly modified asphalt for busy intersection. Dixie Contactor Edition, 849 (10).
   Google Scholar
• Greene, J, Chun, S, and Choubane, B, 2014. Evaluation and implementation of a heavy polymer modified asphalt binder through accelerated pavement testing. Gainesville, FL: Florida department of transportation (FDOT), State Materials Office.
   Google Scholar
• Habbouche, J, 2019. Structural coefficients of high polymer modified asphalt mixes based on mechanistic-empirical analyses and full-scale pavement testing. Reno: University of Nevada.
   Google Scholar
• Habbouche, J, et al., 2020. A critical review of high polymer-modified asphalt binders and mixtures. International Journal of Pavement Engineering, 21 (6), 686–702. doi:10.1080/10298436.2018.1503273.
   Web of Science ®Google Scholar
• Habbouche, J, et al., 2021. State of the practice for high polymer-modified asphalt binders and mixtures. Transportation Research Record: Journal of the Transportation Research Board, 2675 (7), 235–247. doi:10.1177/0361198121995190.
   Web of Science ®Google Scholar
• Hicks, R.G., et al., 1995. Crumb rubber modifiers (CRM) in asphalt pavements: Summary of practices in Arizona, California, and Florida, United States. Federal Highway Administration. Office of Technology Applications.
   Google Scholar
• Isacsson, U, and Zeng, H, 1998. Low-temperature cracking of polymer-modified asphalt. Materials and Structures, 31 (1), 58–63. doi:10.1007/BF02486415.
   Google Scholar
• Ji, J, et al., 2017. Effectiveness of vegetable oils as rejuvenators for aged asphalt binders. Journal of Materials in Civil Engineering, 29 (3), D4016003. doi:10.1061/(ASCE)MT.1943-5533.0001769.
   Web of Science ®Google Scholar
• Khalili, M., et al., 2016. Evaluation of New Innovations in Rubber-Modified Asphalt Binders and Rubberized Asphalt Mixes for Nevada DOT.
   Google Scholar
• Kim, S., Sholar, Gregory A., and Byron, Thomas, 2009. Performance of polymer-modified asphalt mixture with reclaimed asphalt pavement. Transportation Research Record: Journal of the Transportation Research Board, 2126 (1), 109–114. doi:10.3141/2126-13.
   Google Scholar
• Li, X, and Marasteanu, M, 2004. Evaluation of the low temperature fracture resistance of asphalt mixtures using the semi circular bend test. in Association of Asphalt Paving Technologists-Proceedings of the Technology Sessions, AAPT 2004.
   Google Scholar
• Liu, Z., et al., 2021. Comprehensive performance evaluation of steel fiber-reinforced asphalt mixture for induction heating. International Journal of Pavement Engineering, 1–12.
   Web of Science ®Google Scholar
• Lu, X., and Isacsson, U, 1998. Chemical and rheological evaluation of ageing properties of SBS polymer modified bitumens. Fuel, 77 (9-10), 961–972.
   Web of Science ®Google Scholar
• Marasteanu, M, et al., 2017. Testing protocol to obtain failure properties of asphalt binders at low temperature using creep compliance and stress-controlled strength test. Road Materials and Pavement Design, 18 (sup2), 352–367. doi:10.1080/14680629.2017.1304246.
   Web of Science ®Google Scholar
• Marasteanu, M., et al., 2012. Investigation of low temperature cracking in asphalt pavements national pooled fund study–phase II.
   Google Scholar
• Matias De Oliveira, J., et al., 2019. Simple method to evaluate strength and relaxation properties of asphalt binders at low temperature. Transportation Research Record: Journal of the Transportation Research Board, 2673 (6), 492–500. doi:10.1177/0361198119853544.
   Web of Science ®Google Scholar
• Miró, R, et al., 2011. Evaluation of high modulus mixture behaviour with high reclaimed asphalt pavement (RAP) percentages for sustainable road construction. Construction and Building Materials, 25 (10), 3854–3862. doi:10.1016/j.conbuildmat.2011.04.006.
   Web of Science ®Google Scholar
• Mogawer, W.S, et al., 2016. Using polymer modification and rejuvenators to improve the performance of high reclaimed asphalt pavement mixtures. Transportation Research Record: Journal of the Transportation Research Board, 2575 (1), 10–18. doi:10.3141/2575-02.
   Google Scholar
• Peralta, J, et al., 2012. Bio-renewable asphalt modifiers and asphalt substitutes, in Sustainable bioenergy and bioproducts. London: Springer, 89–115.
   Google Scholar
• Rahbar-Rastegar, R, 2017. Cracking in asphalt pavements: Impact of component properties and aging on fatigue and thermal cracking. Durham: University of New Hampshire.
   Google Scholar
• Reinke, G, and River, F, 2018. The relationship of binder delta Tc (ΔTc) & other binder properties to mixture fatigue and relaxation. In Binder ETG meeting.
   Google Scholar
• Steiner, D, and Hofko, B., 2018. On the influence of basic thermodynamics on thermal cracking resistance of asphalt mixtures in cooling tests. RILEM Technical Letters, 3, 1–7.
   Google Scholar
• Tang, N, Huang, W, and Hao, G, 2021. Potential anti-vibration pavements with damping layer: Finite element (FE) modeling, validation, and parametrical studies. Construction and Building Materials, 281, 122550. doi:10.1016/j.conbuildmat.2021.122550.
   Web of Science ®Google Scholar
• Timm, D.H., et al., 2012. Evaluation of mixture performance and structural capacity of pavements utilizing shell thiopave®: phase II: construction, laboratory evaluation and full-scale testing of thiopave® test sections–final report.
   Google Scholar
• Timm, D.H., et al., 2013. Field and laboratory study of high-polymer mixtures at the NCAT test track. Final report: p. 13-03.
   Google Scholar
• Vacková, P, et al., 2016. Effect of additive bitumious binders on a new generation of high modulus asphalt mixtures, in Geo-China 2016. p. 196–204.
   Google Scholar
• Von Quintus, H.L., Mallela, J, and Buncher, M, 2007. Quantification of effect of polymer-modified asphalt on flexible pavement performance. Transportation Research Record: Journal of the Transportation Research Board, 2001, 141–154. doi:10.3141/2001-16.
   Web of Science ®Google Scholar
• Wloczysiak, P, Vidal, A, and Papirer, E, 1997. Relationships between rheological properties, morphological characteristics, and composition of bitumen–styrene butadiene styrene copolymers mixes. II. A thermodynamical interpretation. Journal of Applied Polymer Science, 65 (8), 1609–1618. doi:10.1002/(SICI)1097-4628(19970822)65:8<1609::AID-APP17>3.0.CO;2-Q.
   Web of Science ®Google Scholar
• Xie, Z, et al., 2020a. Impact of additives on low-temperature cracking properties of soft binders used in cold regions. Journal of Materials in Civil Engineering, 32 (10), 04020290.
   Web of Science ®Google Scholar
• Xie, Z, et al., 2020b. Laboratory evaluation of properties of modified asphalt binders with high content polymer and softening agent. The Association of Asphalt Paving Technologists (Virtual, Online Duration: 14 September–16 September).
   Google Scholar
• Yalghouzaghaj, M.N., et al., 2021. Evaluation of the effect of UHMWPE on the Low-temperature cracking of Hot-Mix asphalt. Journal of Materials in Civil Engineering, 33 (3), 04020488.
   Web of Science ®Google Scholar
• Yan, C., et al., 2021. Influence of ageing on high content polymer modified asphalt mixture stripping, cracking and rutting performances. Road Materials and Pavement Design, 22 (8), 1824–1841. doi:10.1080/14680629.2020.1727769.
   Web of Science ®Google Scholar