Influences of bus traffic loading on asphalt concrete rutting

References

• Abdallah, I., and Nazarian, S., 2011. Strategies to improve and preserve flexible pavement at intersections. Publication FHWA/TX 10/0-5566-1, Center for Transportation Infrastructure Systems. The University of Texas, El Paso, Texas.
   Google Scholar
• Al-Qadi, I.L., Elseifi, M.A., and Yoo, P.J., 2004. Pavement damage Due to different tires and vehicle configurations. Blacksburg: Virginia Tech Transportation Institute.
   Google Scholar
• Al-Qadi, I.L., and Wang, H., 2012. Impact of wide-base tires on pavements: results from instrumentation measurements and modeling analysis. Transportation Research Record, 2304 (1), 169–176. doi:10.3141/2304-19.
   Google Scholar
• Ali, B., Sadek, M., and Shahrour, I., 2009. Finite-element model for urban pavement rutting: analysis of pavement rehabilitation methods. Journal of Transportation Engineering, 2009, 235–240.
   Google Scholar
• ARA, 2004. Guide for the Mechanistic empirical design of new and rehabilitated pavement structure. (Report 1-37A), Washington, D. C: Transportation Research Board of the National Academies.
   Google Scholar
• ATB, 2000. General technical construction specifications for roads (ATB väg 2000), Swedish Transport Administration, Borlänge, Sweden (In Swedish).
   Google Scholar
• Björklund, A., 1984. Creep induced behaviour of resurfaced pavements, VTI Report 271A, The Swedish National Road and Transport Research Institute, Linköping, Sweden.
   Google Scholar
• Blab, R., and Litzka, J., 1995. Measurements of the lateral distribution of heavy vehicles and its effects on the design of road pavements. Vienna, Austria: Institute of Road Construction and Maintenance, University of Technology.
   Google Scholar
• Carlsson, H., 2015. Profilmätning på sträckor med gummimodifierat bitumen på E4 Uppsala och E6 Mölndal, Uppföljning efter tre års Trafik. VTI Notat 5-2015, The Swedish National Road and Transport Research Institute, Linköping, Sweden., (In Swedish).
   Google Scholar
• Chatti, K., et al., 1996. Field investigation into effects of vehicle speed and tire pressure on asphalt concrete pavement strains, TRR 1539. https://doi.org/10.1177/0361198196153900109.
   Google Scholar
• Corté, J-F., et al., 1994. Investigation of rutting of asphalt surface layers: influence of binder and axle loading configuration. Transportation Research Record, 1436, 28–37.
   Google Scholar
• De Beer, M., et al., 2005. Tyre-pavement contact stress patterns from the test tyres of the Gautrans heavy vehicle simulator (HVS) MK IV+, Proc. of the SATC 2005.
   Google Scholar
• Di Benedetto, H., Delaporte, B., and Sauzéat, C., 2007. Three-dimensional linear behavior of bituminous materials: experiments and modeling. International Journal of Geomechanics, 7 (2), doi:10.1061/(ASCE)1532-3641(2007)7:2(149).
   Google Scholar
• El-Basyouny, M.M., Witczak, M.W., and El-Badawy, S., 2005. Verification for the calibrated permanent deformation models for the 2002 design guide. Journal of the Association of Asphalt Pavement Technologists, 74, 601–652.
   Google Scholar
• Erlingsson, S., Said, S., and McGgarvey, T., 2012. Influence of heavy traffic lateral wander on pavement deterioration. The 4th European pavement Asset Management Conference, Malmö, Sweden.
   Google Scholar
• Garba, R., 2002. Permanent Deformation Properties of Asphalt Concrete Mixtures. The Department of Road and Railway Engineering, Norwegian University of Science and Technology.
   Google Scholar
• Gramling, W.L., Hunt, J. E., and Suzuki, G.S., 1991. Rational approach to cross-profile and Rut depth analysis. Transportation Research Record, 1311, 173–179.
   Google Scholar
• Habbouche, J., Hajj, E.Y., and Sebaaly, P.E., 2019. Structural coefficient for high polymer modified asphalt mixes. Contract No. BE321, Final Report, Department of Civil and Environmental Engineering, University of Nevada, Reno.
   Google Scholar
• Hajj, E.Y., Tannoury, G., and Sebaaly, P.E., 2011. Evaluation of Rut resistant asphalt mixtures for intersection. Road Materials and Pavement Design, 12, 263–292. doi:10.3166/RMPD.12.263-292.
   Web of Science ®Google Scholar
• Harvey, J., and Popescu, L., 2000. Rutting of caltrans asphalt concrete and asphalt-rubber hot mix under different wheels, tires and temperature-accelerated pavement testing evaluation. Berkeley: Pavement Research Center, Institute of Transportation Studies, University of California.
   Google Scholar
• Hermansson, Å., and Elsander, J., 2003. Prediction of pavement fatigue life with simulated temperature profile from hourly surface temperatures. Road Materials and Pavement Design, 4 (3), 293–308. doi:10.1080/14680629.2003.9689950.
   Google Scholar
• Hopman, P.C, 1996. The visco-elastic multilayer program VEROAD. HERON, 41 (1), 71–91. Univ. of Delft, The Netherland.
   Google Scholar
• Hua, J., and White, T., 2002. A study of nonlinear tire contact pressure effects on HMA rutting. International Journal of Geomechanics, 2 (3), 353–376. doi:10.1061/(ASCE)1532-3641(2002)2.
   Google Scholar
• Jelagin, D., et al., 2018. Asphalt layer rutting performance prediction tools. VTI Report 968A, VTI, Linköping.
   Google Scholar
• Kaloush, K.E., Witczak, M.W., and Sullivan, B. W., 2003. Simple performance test for permanent deformation evaluation of asphalt mixtures. 6th International RILEM Symposium on Performance Testing and Evaluation of Bituminous Materials, 2003, 498–505. https://doi.org/10.1617/2912143772.062.
   Google Scholar
• Kandhal, P.S., Mallick, R.B., and Brown, E. R., 1998. Hot mix asphalt for intersections in hot climates. NCAT Report 98-06, Auburn.
   Google Scholar
• Kenis, W., and Wang, W., 1997. Calibrating mechanistic flexible pavement rutting models from full scale accelerated tests. 8th Int. conference on asphalt pavements, Seattle.
   Google Scholar
• Li, L., et al., 2013. Integrated experimental and numerical study on permanent deformation of asphalt pavement at intersections. July, 907–913. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000745.
   Google Scholar
• McGarvey, T., 2016. Vehicle lateral position depending on road type and lane width vehicle position surveys carried out on the swedish road network. VTI Report 892A, The Swedish National Road and Transport Research Institute, Linköping, Sweden.
   Google Scholar
• McGarvey, T., 2017. Barrier separated road type design accelerated degradation. VTI Report 925A, The Swedish National Road and Transport Research Institute, Linköping, Sweden.
   Google Scholar
• Monismith, C. L, et al., 1994. SHRP report A-415: permanent deformation response of asphalt aggregate mixes. asphalt research program. Berkeley: Institute of Transportation Studies, University of California. Transportation Research, Washington, D.C.
   Google Scholar
• Nilsson, R., 2001. Viscoelastic pavement analysis using VEROAD. Thesis (PhD), KTH Royal Institute of Technology, Stockholm, 2001.
   Google Scholar
• Oscarsson, E., 2011. Mechanistic-empirical modeling of permanent deformation in asphalt concrete layers. Thesis (PhD), Department of Technology and Society, Lund University, Lund, 2011. ISBN 978-91-7473-083-8.
   Google Scholar
• Park, D.W, 2008. Prediction of pavement fatigue and rutting life using different tire types. KSCE Journal of Civil Engineering, 12 (5), 297–303. doi:10.1007/s12205-008-0297-4.
   Web of Science ®Google Scholar
• Parker, F., and Brown, E.R., 1992. Effects of aggregate properties on flexible pavement rutting in Alabama. ASTM STP, 1147, 68–89.
   Google Scholar
• PEDRO online, 2021. [software]. https://pedro.vti.se . Accessed Mars, 2022.
   Google Scholar
• PEDRO v1.10, 2019. [software]. https://www.vti.se/en/research-areas/pavement-design-models-for-roads /. Accessed Mars, 2022.
   Google Scholar
• Rana, M.M., and Hossain, K., 2021. Impact of autonomous truck implementation: rutting and highway safety perspectives. Road Materials and Pavement Design, doi:10.1080/14680629.2021.1963815.
   Web of Science ®Google Scholar
• Said, S.F., et al., 2011. Prediction of flow rutting in asphalt concrete layers. International Journal of Pavement Engineering, 12 (6), 519–532. doi:10.1080/10298436.2011.559549.
   Web of Science ®Google Scholar
• Said, S.F., 2015. Tyre-pavement interaction on flexible pavement rutting. The XXVth World Road Congress (PIARC), Seoul. South Korea.
   Google Scholar
• Said, S.F, et al., 2020. Prediction of rutting in asphalt concrete pavements – the PEDRO model, VTI rapport 1016A, The Swedish National Road and Transport Research Institute, Linköping, Sweden.
   Google Scholar
• Said, S.F., and Ahmed, A. W., 2017. Prediction of heavy vehicle impact on rut development using PEDRO Model. Proceeding of the 10th Int. Conference on the Bearing Capacity of Roads, Railways and Airfields, Athena,1359–1366.
   Google Scholar
• Said, SF., Carlsson, H., and Ahmed, A.W., 2021. Long-term pavement performance road test E6 with polymer modified bitumen – Uddevalla, VTI rapport 1096, The Swedish National Road and Transport Research Institute, Linköping, Sweden.
   Google Scholar
• Said, S.F., and Hakim, H., 2012. Influence of traffic variables on rut formation in asphalt concrete layers, Heavy Vehicle Transport and Technology Conference, Stockholm, Sweden.
   Google Scholar
• Said, S.F., and Hakim, H., 2013a. Effects of transversal distribution of heavy vehicles on Rut formation in Bituminous Layers. Proceedings of the 9th Int. Conf. BCRRA, Trondheim, Norway, 29–35.
   Google Scholar
• Said, S.F., Hakim, H., and Eriksson, O., 2013b. Rheological characterization of asphalt concrete using a shear Box. Journal of Testing and Evaluation, 41 (4), doi:10.1520/JTE20120177.
   Web of Science ®Google Scholar
• Salama, H.K., Haider, S.W., and Chatti, K., 2007. Evaluation of new mechanistic-empirical pavement design guide rutting models for multiple-axle loads, Transportation Research Record, TRR No. 2005, pp. 112-123.
   Google Scholar
• Siddharthan, R.V., et al., 2017. Investigation of impact of wheel wander on pavement performance. Road Materials and Pavement Design, 18 (2), 390–407. doi:10.1080/14680629.2016.1162730.
   Web of Science ®Google Scholar
• Soares, R.F., et al., 2008. A computational model for predicting the effect of tire configuration on asphaltic pavement life. Road Materials and Pavement Design, 9 (2), doi:10.3166/rmpd.9.271-289.
   Web of Science ®Google Scholar
• Sousa, J., Craus, J., and Monismith, C., 1991. Summary report on permanent deformation in asphalt concrete. SHRP-A/IR-91-104, Project A-003A, University of California, Berkeley.
   Google Scholar
• Timm, D.H., and Priest, A.L, 2005. Wheel wander at the NCAT Test Track, NCAT Report 05-02, National Center for Asphalt Technology (NCAT), Auburn University.
   Google Scholar
• TRVMB, 2012. Deflektionsmätning Vid Provbelastning Med Fallviktsapparat. Swedish Transport Administration, Borlänge, Sweden (In Swedish).
   Google Scholar
• Ullidtz, P., et al., 2008. Calibration of mechanistic-empirical models for flexible pavements using the WesTrack experiment. Journal of the Association of Asphalt Paving Technologists (AAPT), 77, 591–630.
   Google Scholar
• Ulmgren, N., and Lundström, R., 2006. The SMA-principle applied to wearing, binder and base course layers – the VIACO-concept, 10th International Conference on Asphalt Pavements, ISAP Qubéc 2006.
   Google Scholar
• Wang, H., 2011. Analysis of tire-pavement interaction and pavement responses using a decoupled modeling approach. University of Illinois at Urbana-Champaign, Urbana, Illinois.
   Google Scholar
• Wang, H., and Al-Qadi, I. L., 2010. Evaluation of surface-related pavement damage Due to tire braking. Road Materials and Pavement Design, 11 (1), 101–121. doi:10.1080/14680629.2010.9690262.
   Web of Science ®Google Scholar
• Wiman, L.G., et al., 2009. Prov med olika överbyggnadstyper. E6 Fastarp-Heberg. VTI rapport 632, The Swedish National Road and Transport Research Institute, (In Swedish).
   Google Scholar