References
- Alamdarlo, M.N. and Hesami, S., 2018. Optimization of the photometric stereo method for measuring pavement texture properties. Measurement, 127, 406–413. doi:10.1016/j.measurement.2018.05.109.
- ASTM, 2015. Standard test method for measuring pavement texture drainage using an outflow meter. Book of ASTM Standards. West Conshohocken, PA, USA.
- ASTM, 2019. Standard test method for measuring pavement macrotexture depth using a volumetric technique. Book of ASTM Standards. West Conshohocken, PA, USA.
- Dong, S., et al., 2021. Three-dimensional evaluation method for asphalt pavement texture characteristics. Construction and Building Materials, 287, 122966. doi:10.1016/j.conbuildmat.2021.122966.
- Dong, S., et al., 2022. Asphalt pavement macrotexture reconstruction from monocular image based on deep convolutional neural network. Computer-Aided Civil and Infrastructure Engineering, 37 (13), 1754–1768. doi:10.1111/mice.12878.
- Edmondson, V., et al., 2019. Improved non-contact 3D field and processing techniques to achieve macrotexture characterisation of pavements. Construction and Building Materials, 227, 116693. doi:10.1016/j.conbuildmat.2019.116693.
- Fisco, N.R., 2009. Comparison of macrotexture measurement methods. Thesis (PhD). The Ohio State University.
- Han, D., 2013. Comparison of commonly used image interpolation methods. In: Conference of the 2nd international conference on computer science and electronics engineering (ICCSEE 2013). Hangzhou, People’s Republic of China: Atlantis Press, 1556–1559.
- Henry, J.J., 2000. Evaluation of pavement friction characteristics (Vol. 291). Transportation Research Board. Washington, D.C., USA.
- Huang, Y., et al., 2013. Development of texture measurement system based on continuous profiles from three-dimensional scanning system. Transportation Research Record, 2367 (1), 13–22. doi:10.3141/2367-02.
- ISO, 2002. Characterization of pavement texture by use of surface profiles – part 3: specification and classification of profilometers. Geneva, Switzerland: International Organization for Standardization.
- Jackson, N.M., Choubane, B., and Holzschuher, C., 2009. Practical approach to measuring and reporting friction and macrotexture at variable test speeds. Transportation Research Record, 2094 (1), 103–111. doi:10.3141/2094-11.
- Kargah-Ostadi, N. and Howard, A., 2015. Monitoring pavement surface macrotexture and friction: case study. Transportation Research Record, 2525 (1), 111–117. doi:10.3141/2525-12.
- Khaledyan, D., et al., 2020. Low-cost implementation of bilinear and bicubic image interpolation for real-time image super-resolution. In: 2020 IEEE global humanitarian technology conference (GHTC). Seattle, USA: IEEE, 1–5.
- Kogbara, R.B., et al., 2018. Relating surface texture parameters from close range photogrammetry to grip-tester pavement friction measurements. Construction and Building Materials, 166, 227–240. doi:10.1016/j.conbuildmat.2018.01.102.
- Laurent, J., Hébert, J., and Talbot, M., 2017. Using full lane 3D road texture data for the automated detection of sealed cracks, bleeding and ravelling. In: Proceedings of the world conference on pavement and asset management. Milan, Italy, 12–16.
- Li, Q., et al., 2017. Novel macro-and microtexture indicators for pavement friction by using high-resolution three-dimensional surface data. Transportation Research Record, 2641 (1), 164–176. doi:10.3141/2641-19.
- Li, L. and Wang, K.C., 2016. Geometric texture indicators for safety on AC pavements with 1 mm 3D laser texture data. International Journal of Pavement Research and Technology, 9 (1), 49–62. doi:10.1016/j.ijprt.2016.01.004.
- Liu, Q. and Shalaby, A., 2017. Relating concrete pavement noise and friction to three-dimensional texture parameters. International Journal of Pavement Engineering, 18 (5), 450–458. doi:10.1080/10298436.2015.1095897.
- Mahboob Kanafi, M., et al., 2015. Macro-and micro-texture evolution of road pavements and correlation with friction. International Journal of Pavement Engineering, 16 (2), 168–179. doi:10.1080/10298436.2014.937715.
- Parsa, A.B., 2020. Pavement condition and traffic safety: a comprehensive review of the literature. Illinois Asphalt Pavement Association. Springfield, IL, USA.
- Pranjić, I. and Deluka-Tibljaš, A., 2022. Pavement texture–friction relationship establishment via image analysis methods. Materials, 15 (3), 846. doi:10.3390/ma15030846.
- Rasmussen, R.O., et al., 2011. Measuring and analyzing pavement texture: concrete pavement surface characteristics program. National Concrete Pavement Technology Center. Ames, IA, USA.
- Sarsam, S.I. and Ali, A.M., 2015. Assessing pavement surface macrotexture using sand patch test and close range photogrammetric approaches. International Journal of Materials Chemistry and Physics, Public Science Framework American Institute of Science, 1 (2), 124–131. Available from: http://files.aiscience.org/journal/article/html/70130020.html.
- U.S. DOT. Roadway departure safety. Federal Highway Administration. Available from: https://safety.fhwa.dot.gov/roadway_dept/#:~:text=From%202016%20to%202018%20an,RwD%20fatalities%20and%20serious%20injuries.
- Vosselman, G. and Maas, H.-G., eds., 2010. Airborne and terrestrial laser scanning. Dunbeath: Whittles Publishing.
- Wang, G., et al., 2022. Nondestructive bridge deck evaluation using sub-mm 3D laser imaging technology at highway speeds. Journal of Bridge Engineering, 27 (6), 04022045. doi:10.1061/(ASCE)BE.1943-5592.0001888.
- Wang, K.C. and Li, Q., 2017. Safety analysis opportunities using pavement surface characterization based on 3D laser imaging. Report no. FHWA-SA-17-046. Federal Highway Administration. Washington, D.C., USA.
- Wang, G., Wang, K.C.P., and Yang, G., 2023. Reconstruction of sub-mm 3D pavement images using recursive generative adversarial network for faster texturemeasurement. Computer-Aided Civil and Infrastructure Engineering, 38, 1–19. doi:10.1111/mice.13020.
- Yang, G., et al., 2018. Wavelet based macrotexture analysis for pavement friction prediction. KSCE Journal of Civil Engineering, 22 (1), 117–124. doi:10.1007/s12205-017-1165-x.
- Yang, G., et al., 2022. A novel 0.1 mm 3D laser imaging technology for pavement safety measurement. Sensors, 22 (20), 8038. doi:10.3390/s22208038.
- Zhan, Y., et al., 2020. Friction-ResNets: deep residual network architecture for pavement skid resistance evaluation. Journal of Transportation Engineering, Part B: Pavements, 146 (3), 04020027. doi:10.1061/JPEODX.0000187.
- Zuniga-Garcia, N. and Prozzi, J.A., 2016. Contribution of micro-and macro-texture for predicting friction on pavement surfaces. Report no. CHPP Report-UTA# 3-2016. Center for Highway Pavement Preservation. East Lansing, MI, USA.