References
- AASHTO, 2003. AASHTO t 307-99: standard method of test for determining the resilient modulus of soils and aggregate materials. Washington, DC: American Association of State Highway and Transportation Officials.
- Applied Research Associates, Inc, 2019. National airport pavement construction cycle 1 (CC1) comprehensive report. General Dynamics Information Technology, Inc.
- ARA, Inc, 2004. NCHRP final report: guide for mechanistic–empirical design of new and rehabilitated pavement structures. Washington, D.C.: Transportation Research Board.
- Ayyala, D., Lee, H., and Von Quintus, H., 2018. Characterizing existing asphalt concrete layer damage for mechanistic pavement rehabilitation design. Washington, DC: Publication FHWA-HRT-17-059. FHWA, U.S. Department of Transportation.
- Duncan, J. M., and Chang, C.-Y, 1970. Nonlinear analysis of stress and strain in soils. Journal of the Soil Mechanics and Foundations Division, 96 (5), 1629–1653.
- Hajj, E. Y., et al., 2018. Analysis procedures for evaluating superheavy load movement on flexible pavements. McLean, Virginia: Publication FHWA-HRT-18-049, Volume I: Final Report. FHWA, U.S. Department of Transportation.
- Hayhoe, G. F., and Garg, G., 2006. Traffic testing results from CC3 flexible pavements at the FAA's NAPTF. Presented at the 10th International Conference on Asphalt Pavements, Quebec City, Canada.
- Nabizadeh, H., et al., 2019. Validation of the subgrade shear strength parameters estimation methodology using light weight deflectometer: numerical simulation and measured testing data. Transportation Geotechnics, 21, 100259.
- National Cooperative Highway Research Program, 2004. Guide for mechanistic empirical design of new and rehabilitated pavement structures, final report. Washington, DC: Transportation Research Board.
- Nicks, J., 2013. Friction angles of open-graded aggregates from large-scale direct shear testing. McLean, Virginia: Publication FHWA-HRT-13-068. FHWA, U.S. Department of Transportation.
- Siddharthan, R. V., Yao, J., and Sebaaly, P. E., 1998. Pavement strain from moving dynamic 3D load distribution. Journal of Transportation Engineering, 124 (6), 557–566.