Flexural fatigue performance of a high-thixotropy UHPC

References

• Abbas, S., Soliman, A.M., and Nehdi, M.L., 2015. Exploring mechanical and durability properties of ultra-high performance concrete incorporating various steel fiber lengths and dosages. Construction and Building Materials, 75, 429–441.
   Web of Science ®Google Scholar
• Abrishambaf, A., Pimentel, M., and Nunes, S., 2017. Influence of fibre orientation on the tensile behaviour of ultra-high performance fibre reinforced cementitious composites. Cement and Concrete Research, 97, 28–40.
   Web of Science ®Google Scholar
• Ahari, R.S., Erdem, T.K., and Ramyar, K., 2015. Thixotropy and structural breakdown properties of self consolidating concrete containing various supplementary cementitious materials. Cement and Concrete Composites, 59, 26–37.
   Web of Science ®Google Scholar
• Arora, A., et al., 2019. Fundamental insights into the compressive and flexural response of binder-and aggregate-optimized ultra-high performance concrete (UHPC). Cement and Concrete Composites, 98, 1–13.
   Web of Science ®Google Scholar
• Arora, S., and Singh, S.P., 2017. Fatigue strength and failure probability of concrete made with RCA. Magazine of Concrete Research, 69 (2), 55–67.
   Web of Science ®Google Scholar
• Azmee, N.M., and Shafiq, N., 2018. Ultra-high performance concrete: From fundamental to applications. Case Studies in Construction Materials, 9, e00197.
   Google Scholar
• Bajaber, M., and Hakeem, I., 2021. UHPC evolution, development, and utilization in construction: A review. Journal of Materials Research and Technology, 10, 1058–1074.
   Google Scholar
• Barnes, H.A., 1997. Thixotropy–a review. Journal of Non-Newtonian Fluid Mechanics, 70 (1-2), 1–33.
   Web of Science ®Google Scholar
• British Standards Institution., 2008. Test method for metallic fibre concrete: measuring the flexural tensile strength (limit of proportionality (LOP), residual). BSI.
   Google Scholar
• Carlesso, D.M., De la Fuente, A., and Cavalaro, S.H.P., 2019. Fatigue of cracked high performance fiber reinforced concrete subjected to bending. Construction and Building Materials, 220, 444–455.
   Web of Science ®Google Scholar
• Chen, J.J., Chen, H.N., and Li, G., 2019. Packing density improvement for improving strength of cement paste. In: Materials science forum. Vol. 943, 124–128.
   Google Scholar
• Choi, M.S., et al., 2016. Estimation of rheological properties of UHPC using mini slump test. Construction and Building Materials, 106, 632–639.
   Web of Science ®Google Scholar
• Christidis, K., Badogiannis, E., and Mintzoli, C., 2021. Flexural behaviour of pumice lightweight concrete reinforced with end-hooked steel fibres. In: Structures. Vol. 33, 3835–3847.
   Google Scholar
• Dils, J., Boel, V., and De Schutter, G., 2013. Influence of cement type and mixing pressure on air content, rheology and mechanical properties of UHPC. Construction and Building Materials, 41, 455–463.
   Web of Science ®Google Scholar
• Dzuy, N.Q., and Boger, D.V., 1985. Direct yield stress measurement with the vane method. Journal of Rheology, 29 (3), 335–347.
   Web of Science ®Google Scholar
• Feys, D., Verhoeven, R., and De Schutter, G., 2008. Fresh self compacting concrete, a shear thickening material. Cement and Concrete Research, 38 (7), 920–929.
   Web of Science ®Google Scholar
• Germano, F., Tiberti, G., and Plizzari, G., 2016. Post-peak fatigue performance of steel fiber reinforced concrete under flexure. Materials and Structures, 49, 4229–4245.
   Google Scholar
• Goel, S., Singh, S., and Singh, P., 2012. Flexural fatigue strength and failure probability of self compacting fibre reinforced concrete beams. Engineering Structures, 40, 131–140.
   Web of Science ®Google Scholar
• González-Taboada, I., et al., 2018. Thixotropy and interlayer bond strength of self-compacting recycled concrete. Construction and Building Materials, 161, 479–488.
   Web of Science ®Google Scholar
• González, D.C., et al., 2018. Postcracking residual strengths of fiber-reinforced high-performance concrete after cyclic loading. Structural Concrete, 19 (2), 340–351.
   Web of Science ®Google Scholar
• Güneyisi, E., et al., 2016. Evaluation of the rheological behavior of fresh self-compacting rubberized concrete by using the Herschel-Bulkley and modified Bingham models. Archives of Cvil and Mechanical Engineering, 16, 9–19.
   Web of Science ®Google Scholar
• Haber, Z.B., et al., 2018. Bond characterization of UHPC overlays for concrete bridge decks: Laboratory and field testing. Construction and Building Materials, 190, 1056–1068.
   Web of Science ®Google Scholar
• Haber, Z.B., Munoz, J.F., and Graybeal, B.A., 2017. Field testing of an ultra-high performance concrete overlay (Tech. Rep.). United States. Federal Highway Administration. Office of Infrastructure ….
   Google Scholar
• Habert, G., et al., 2013. Lowering the global warming impact of bridge rehabilitations by using Ultra High Performance Fibre Reinforced Concretes. Cement and Concrete Composites, 38, 1–11.
   Web of Science ®Google Scholar
• Heilbronner, R., and Barrett, S., 2013. Image analysis in earth sciences: microstructures and textures of earth materials. Vol. 129. Springer Science & Business Media.
   Google Scholar
• Helsel, M.A., et al., 2023. Effect of bridge deck surface preparation on the consolidation and bond of UHPC overlays. Construction and Building Materials, 364, 129860.
   Web of Science ®Google Scholar
• Hu, C., and de Larrard, F., 1996. The rheology of fresh high-performance concrete. Cement and Concrete Research, 26 (2), 283–294.
   Web of Science ®Google Scholar
• Huang, H., et al., 2018. Improvement effect of steel fiber orientation control on mechanical performance of UHPC. Construction and Building Materials, 188, 709–721.
   Web of Science ®Google Scholar
• Huang, H., et al., 2020. SPH simulation and experimental investigation of fiber orientation in UHPC beams with different placements. Construction and Building Materials, 233, 117372.
   Web of Science ®Google Scholar
• Huang, H., et al., 2021. Influence of fiber alignment and length on flexural properties of UHPC. Construction and Building Materials, 290, 122863.
   Web of Science ®Google Scholar
• Huang, H., Gao, X., and Teng, L., 2021. Fiber alignment and its effect on mechanical properties of UHPC: An overview. Construction and Building Materials, 296, 123741.
   Web of Science ®Google Scholar
• Jau, W.C., and Yang, C.T., 2010. Development of a modified concrete rheometer to measure the rheological behavior of conventional and self-consolidating concretes. Cement and Concrete Composites, 32 (6), 450–460.
   Web of Science ®Google Scholar
• Jiao, Y., et al., 2020. Mechanical and fracture properties of ultra-high performance concrete (UHPC) containing waste glass sand as partial replacement material. Journal of Cleaner Production, 277, 123501.
   Web of Science ®Google Scholar
• Kang, S.T., et al., 2011. The effect of fibre distribution characteristics on the flexural strength of steel fibre-reinforced ultra high strength concrete. Construction and Building Materials, 25 (5), 2450–2457.
   Web of Science ®Google Scholar
• Kang, S.T., and Kim, J.K., 2012. Investigation on the flexural behavior of UHPCC considering the effect of fiber orientation distribution. Construction and Building Materials, 28 (1), 57–65.
   Web of Science ®Google Scholar
• Khayat, K.H., et al., 2019. Rheological properties of ultra-high-performance concrete–an overview. Cement and Concrete Research, 124, 105828.
   Web of Science ®Google Scholar
• Kolawole, J.T., Combrinck, R., and Boshoff, W.P., 2019. Measuring the thixotropy of conventional concrete: The influence of viscosity modifying agent, superplasticiser and water. Construction and Building Materials, 225, 853–867.
   Web of Science ®Google Scholar
• Li, J., et al., 2020. Durability of ultra-high performance concrete–A review. Construction and Building Materials, 255, 119296.
   Web of Science ®Google Scholar
• Li, H., et al., 2020. Investigations of mixing technique on the rheological properties of self-compacting concrete. Applied Sciences, 10 (15), 5189.
   Google Scholar
• Li, S., et al., 2021. Influence of micromechanical property on the rate-dependent flexural strength of ultra-high performance concrete containing coarse aggregates (UHPC-CA). Composites Part B: Engineering, 227, 109394.
   Web of Science ®Google Scholar
• Lowke, D., 2018. Thixotropy of SCC–A model describing the effect of particle packing and superplasticizer adsorption on thixotropic structural build-up of the mortar phase based on interparticle interactions. Cement and Concrete Research, 104, 94–104.
   Web of Science ®Google Scholar
• Makita, T., and Brühwiler, E., 2014. Tensile fatigue behaviour of ultra-high performance fibre reinforced concrete (UHPFRC). Materials and Structures, 47, 475–491.
   Web of Science ®Google Scholar
• Mardani-Aghabaglou, A., et al., 2013. Effect of different types of superplasticizer on fresh, rheological and strength properties of self-consolidating concrete. Construction and Building Materials, 47, 1020–1025.
   Web of Science ®Google Scholar
• Marković, I., 2006. High-performance hybrid-fibre concrete: Development and utilisation. Doctorial Thesis, Universiteit van Belgrado, Servi, DUP Science, The Netherlands, 90–92.
   Google Scholar
• Martinie, L., Rossi, P., and Roussel, N., 2010. Rheology of fiber reinforced cementitious materials: classification and prediction. Cement and Concrete Research, 40 (2), 226–234.
   Web of Science ®Google Scholar
• Martinie, L., and Roussel, N., 2011. Simple tools for fiber orientation prediction in industrial practice. Cement and Concrete Research, 41 (10), 993–1000.
   Web of Science ®Google Scholar
• MC2010, F., 2013. CEB-FIB model code for concrete structures 2010. Lausanne: International Federation for Structural Concrete.
   Google Scholar
• Meléndez, A., et al., 2022. Comportamiento mecánico de una estructura de pavimento flexible rehabilitada con una sobrecapa de UHPFRC. Revista ingeniería de construcción, 37 (3), 335–344.
   Google Scholar
• Meng, W., and Khayat, K.H., 2017. Improving flexural performance of ultra-high-performance concrete by rheology control of suspending mortar. Composites Part B: Engineering, 117, 26–34.
   Web of Science ®Google Scholar
• Mishra, O., and Singh, S., 2019. An overview of microstructural and material properties of ultra-high-performance concrete. Journal of Sustainable Cement-Based Materials, 8 (2), 97–143.
   Web of Science ®Google Scholar
• Naaman, A., and Hammoud, H., 1998. Fatigue characteristics of high performance fiber-reinforced concrete. Cement and Concrete Composites, 20 (5), 353–363.
   Web of Science ®Google Scholar
• Nazar, S., et al., 2020. Rheological properties of cementitious composites with and without nano-materials: a comprehensive review. Journal of Cleaner Production, 272, 122701.
   Web of Science ®Google Scholar
• Omran, A.F., Naji, S., and Khayat, K.H., 2011. Portable vane test to assess structural buildup at rest of self-consolidating concrete. ACI Materials Journal, 108 (6), 628–637.
   Web of Science ®Google Scholar
• Pilar, R., et al., 2021. Rheological behavior of low shrinkage very high strength self-compacting concrete. Construction and Building Materials, 286, 122838.
   Web of Science ®Google Scholar
• Qian, Y., et al., 2018. Effect of polycarboxylate ether superplasticizer (PCE) on dynamic yield stress, thixotropy and flocculation state of fresh cement pastes in consideration of the Critical Micelle Concentration (CMC). Cement and Concrete Research, 107, 75–84.
   Web of Science ®Google Scholar
• Raju, R.A., et al., 2020. Effects of concrete flow on the distribution and orientation of fibers and flexural behavior of steel fiber-reinforced self-compacting concrete beams. Construction and Building Materials, 262, 119963.
   Web of Science ®Google Scholar
• Rincón, O., and Ocampo, M., 2017. Weak rocks disintegration patterns recognition through image analysis. In: 2017 fifteenth IAPR international conference on machine vision applications (MVA), 338–341.
   Google Scholar
• Rincon, O., Shakoor, A., and Ocampo, M., 2016. Investigating the reliability of H/V spectral ratio and image entropy for quantifying the degree of disintegration of weak rocks. Engineering Geology, 207, 115–128.
   Web of Science ®Google Scholar
• Roussel, N., 2006. A thixotropy model for fresh fluid concretes: theory, validation and applications. Cement and Concrete Research, 36 (10), 1797–1806.
   Web of Science ®Google Scholar
• Sanjayan, J., Jayathilakage, R., and Rajeev, P., 2021. Vibration induced active rheology control for 3D concrete printing. Cement and Concrete Research, 140, 106293.
   Web of Science ®Google Scholar
• Schmidt, M., and Fehling, E., 2005. Ultra-high-performance concrete: research, development and application in Europe. ACI Special Publication, 228 (1), 51–78.
   Google Scholar
• Schwartzentruber, L., Le Roy, R., and Cordin, J., 2006. Rheological behaviour of fresh cement pastes formulated from a Self Compacting Concrete (SCC). Cement and Concrete Research, 36 (7), 1203–1213.
   Web of Science ®Google Scholar
• Shao, Y., et al., 2022. Impact of fiber distribution and cyclic loading on the bond behavior of steel-reinforced UHPC. Cement and Concrete Composites, 126, 104338.
   Web of Science ®Google Scholar
• Sohail, M.G., et al., 2021. Durability characteristics of high and ultra-high performance concretes. Journal of Building Engineering, 33, 101669.
   Web of Science ®Google Scholar
• Soliman, N.A., and Tagnit-Hamou, A., 2017. Using particle packing and statistical approach to optimize eco-Efficient ultra-high-performance concrete. ACI Materials Journal, 114 (6), 847–859.
   Web of Science ®Google Scholar
• Sritharan, S., et al., 2018. First application of UHPC bridge deck overlay in North America. Transportation Research Record, 2672 (26), 40–47.
   Web of Science ®Google Scholar
• Swamy, R., 1975. Fibre reinforcement of cement and concrete. Matériaux et Construction, 8, 235–254.
   Google Scholar
• Wang, R., et al., 2017. Influence of rheological properties of cement mortar on steel fiber distribution in UHPC. Construction and Building Materials, 144, 65–73.
   Web of Science ®Google Scholar
• Yoo, D.Y., Kim, S.W., and Park, J.J., 2017. Comparative flexural behavior of ultra-high-performance concrete reinforced with hybrid straight steel fibers. Construction and Building Materials, 132, 219–229.
   Web of Science ®Google Scholar
• Yu, R., Spiesz, P., and Brouwers, H., 2014. Mix design and properties assessment of ultra-high performance fibre reinforced concrete (UHPFRC). Cement and Concrete Research, 56, 29–39.
   Web of Science ®Google Scholar
• Zhang, Y., et al., 2020. Improvement of flexural and tensile strength of layered-casting UHPC with aligned steel fibers. Construction and Building Materials, 251, 118893.
   Web of Science ®Google Scholar
• Zhou, B., and Uchida, Y., 2017. Relationship between fiber orientation/distribution and post-cracking behaviour in ultra-high-performance fiber-reinforced concrete (UHPFRC). Cement and Concrete Composites, 83, 66–75.
   Web of Science ®Google Scholar
• Zhu, B., et al., 2021. 3D concrete printing of permanent formwork for concrete column construction. Cement and Concrete Composites, 121, 104039.
   Web of Science ®Google Scholar