References
- Aamer Rafique Bhutta, M., et al., 2013. Properties of porous concrete from waste crushed concrete (recycled aggregate). Construction and Building Materials, 47, 1243–1248.
- Akçaoğlu, T., Tokyay, M., and Çelik, T, 2004. Effect of coarse aggregate size and matrix quality on ITZ and failure behavior of concrete under uniaxial compression. Cement and Concrete Composites, 26 (6), 633–638.
- Al-Rousan, T., et al., 2005. New methodology for shape classification of aggregates. Transportation Research Record, 1913 (1), 11–23.
- Al-Rousan, T., et al., 2007. Evaluation of image analysis techniques for quantifying aggregate shape characteristics. Construction and Building Materials, 21 (5), 978–990.
- Altuhafi, F., O’Sullivan, C., and Cavarretta, I, 2013. Analysis of an image-based method to quantify the size and shape of sand particles. Journal of Geotechnical and Geoenvironmental Engineering, 139 (8), 1290–1307.
- Anburuvel, A., and Subramaniam, D. N, 2022. Investigation of the effects of compaction on compressive strength and porosity characteristics of pervious concrete. Transportation Research Record, 2676 (9), 513–525.
- Anburuvel, A., and Subramaniam, D. N, 2024. A novel multi-variable model for the estimation of compressive strength of pervious concrete. International Journal of Pavement Research and Technology, 17, 720–731.
- Arasan, S., et al., 2011. Correlation between shape of aggregate and mechanical properties of asphalt concrete. Road Materials and Pavement Design, 12 (2), 239–262.
- Bangaru, R. S., and Das, A, 2012. Aggregate shape characterization in frequency domain. Construction and Building Materials, 34, 554–560.
- Barksdale, R., et al., 1991. Measurement of aggregate shape, surface area, and roughnes. Transportation Research Record, 1301, 107–116.
- Bhattacharya, S., et al., 2020. Estimation of 3D sphericity by volume measurement – application to coarse aggregates. Transportation Geotechnics, 23, 100344.
- Brzezicki, J. M., and Kasperkiewicz, J, 1999. Automatic image analysis in evaluation of aggregate shape. Journal of Computing in Civil Engineering, 13 (2), 123–128.
- Chan, K. W., and Kwan, A. K. H, 2014. Evaluation of particle packing models by comparing with published test results. Particuology, 16, 108–115.
- Chang, C. S., and Deng, Y, 2020. Packing potential index for binary mixtures of granular soil. Powder Technology, 372, 148–160.
- Ćosić, K., et al., 2015. Influence of aggregate type and size on properties of pervious concrete. Construction and Building Materials, 78, 69–76.
- Cruz-Matías, I., et al., 2019. Sphericity and roundness computation for particles using the extreme vertices model. Journal of Computational Science, 30, 28–40.
- Das, N., et al., 2011. Modeling granular particle shape using discrete element method. Geo-Frontiers, 2011, 4293–4302.
- de Larrard, F., and Sedran, T., 1994. Optimization of ultra-high-performance concrete by the use of a packing model. Cement and Concrete Research, 24 (6), 997–1009.
- Deng, W., et al., 2021. Shape effects on mechanical properties of maximally random jammed packings of intersecting spherocylinders. Powder Technology, 383, 443–453.
- Ding, X., Ma, T., and Gao, W, 2017. Morphological characterization and mechanical analysis for coarse aggregate skeleton of asphalt mixture based on discrete-element modeling. Construction and Building Materials, 154, 1048–1061.
- Dinger, D. R., and Funk, J. E, 2013. Particle-packing phenomena and their application in materials processing. MRS Bulletin, 22 (12), 19–23.
- Evangelista, L., and de Brito, J., 2007. Mechanical behaviour of concrete made with fine recycled concrete aggregates. Cement and Concrete Composites, 29 (5), 397–401.
- Fletcher, T., et al., 2003. Aggregate imaging system for characterizing the shape of fine and coarse aggregates. Transportation Research Record, 1832 (1), 67–77.
- Gan, Y., Kamlah, M., and Reimann, J, 2010. Computer simulation of packing structure in pebble beds. Fusion Engineering and Design, 85 (10), 1782–1787.
- Ge, H., et al., 2018. Three-dimensional characterization of morphology and abrasion decay laws for coarse aggregates. Construction and Building Materials, 188, 58–67.
- Ghosh, S., Dhang, N., and Deb, A, 2020. Influence of aggregate geometry and material fabric on tensile cracking in concrete. Engineering Fracture Mechanics, 239, 107321.
- Gong, F., et al., 2016. A new method for characterizing coarse aggregate morphology through a MATLAB program. Geo-China, 2016, 53–60.
- Gu, X., Tran, Y., and Hong, L, 2014. Quantification of coarse aggregate shape in concrete. Frontiers of Structural and Civil Engineering, 8 (3), 308–321.
- Kim, Y., Suh, H. S., and Yun, T. S, 2019. Reliability and applicability of the Krumbein-Sloss chart for estimating geomechanical properties in sands. Engineering Geology, 248, 117–123.
- Krejsová, J., et al., 2018. The influence of different aggregates on the behavior and properties of gypsum mortars. Cement and Concrete Composites, 92, 188–197.
- Kusumawardani, D. M., and Wong, Y. D, 2020. Evaluation of aggregate gradation on aggregate packing in porous asphalt mixture (PAM) by 3D numerical modelling and laboratory measurements. Construction and Building Materials, 246, 118414.
- Kwan, A. K. H., Ng, P. L., and Huen, K. Y, 2014. Effects of fines content on packing density of fine aggregate in concrete. Construction and Building Materials, 61, 270–277.
- Lewis, D. W., and McConchie, D., 1994, Textures. In: D. W. Lewis and D. McConchie, eds. Analytical sedimentology. Boston, MA: Springer US, 92–129.
- Lin, W., et al., 2016. Development of permeability test method for porous concrete block pavement materials considering clogging. Construction and Building Materials, 118, 20–26.
- Liu, P., et al., 2017. Modelling and evaluation of aggregate morphology on asphalt compression behavior. Construction and Building Materials, 133, 196–208.
- Maerz, N. H, 2004. Technical and computational aspects of the measurement of aggregate shape by digital image analysis. Journal of Computing in Civil Engineering, 18 (1), 10–18.
- Mahmoud, E., Masad, E., and Nazarian, S, 2010. Discrete element analysis of the influences of aggregate properties and internal structure on fracture in asphalt mixtures. Journal of Materials in Civil Engineering, 22 (1), 10–20.
- Man, H. K., and van Mier, J. G. M., 2011. Damage distribution and size effect in numerical concrete from lattice analyses. Cement and Concrete Composites, 33 (9), 867–880.
- Maroof, M. A., Mahboubi, A., and Noorzad, A, 2020, July. A new method to determine specific surface area and shape coefficient of a cohesionless granular medium. Advanced Powder Technology, 31 (7), 3038–3049.
- Masad, E., Button, J. W., and Papagiannakis, T, 2000. Fine-aggregate angularity: automated image analysis approach. Transportation Research Record, 1721 (1), 66–72.
- Mora, C. F., and Kwan, A. K. H, 2000. Sphericity, shape factor, and convexity measurement of coarse aggregate for concrete using digital image processing. Cement and Concrete Research, 30 (3), 351–358.
- Mostofinejad, D., and Reisi, M, 2012. A new DEM-based method to predict packing density of coarse aggregates considering their grading and shapes. Construction and Building Materials, 35, 414–420.
- Mueller, G. E, 2010. Radial porosity in packed beds of spheres. Powder Technology, 203 (3), 626–633.
- Ng, P.-L., Kwan, A. K.-H., and Li, L. G, 2016. Packing and film thickness theories for the mix design of high-performance concrete. Journal of Zhejiang University-SCIENCE A, 17 (10), 759–781.
- Pouranian, M. R., and Haddock, J. E, 2018. Determination of voids in the mineral aggregate and aggregate skeleton characteristics of asphalt mixtures using a linear-mixture packing model. Construction and Building Materials, 188, 292–304.
- Rueden, C. T., et al., 2017. ImageJ2: ImageJ for the next generation of scientific image data. BMC Bioinformatics, 18 (1), 529.
- Sajeevan, M., et al., 2023. Investigation of compaction on compressive strength and porosity of pervious concrete. International Journal of Pavement Research and Technology. https://doi.org/10.1007/s42947-023-00377-w
- Sajeevan, M., Ahilash, N., and Subramaniam, D. N. 2022. Investigating impact of boundary layer in pervious concrete. In: Proceedings Road and Airfield Pavement Technology, Cham, Springer International Publishing, 431–442.
- Sajeevan, M., and Subramaniam, D. N, 2022. Investigation of boundary layer impact on pervious concrete. International Journal of Pavement Engineering, 24 (2), 1–17.
- Sathiparan, N., Jeyananthan, P., and Subramaniam, D. N, 2024. Effect of aggregate size, aggregate to cement ratio and compaction energy on ultrasonic pulse velocity of pervious concrete: prediction by an analytical model and machine learning techniques. Asian Journal of Civil Engineering, 25, 495–509.
- Shen, P., et al., 2019. The effect of curing regimes on the mechanical properties, nano-mechanical properties and microstructure of ultra-high performance concrete. Cement and Concrete Research, 118, 1–13.
- Shuguang, L., and Qingbin, L, 2015. Method of meshing ITZ structure in 3D meso-level finite element analysis for concrete. Finite Elements in Analysis and Design, 93, 96–106.
- Su, D., and Xiang, W, 2020. Characterization and regeneration of 2D general-shape particles by a Fourier series-based approach. Construction and Building Materials, 250, 118806.
- Su, D., and Yan, W. M, 2018. Quantification of angularity of general-shape particles by using Fourier series and a gradient-based approach. Construction and Building Materials, 161, 547–554.
- Subramaniam, D. N., et al., 2018. Dynamics of clay particles in non-vegetated stormwater biofilters. Water, Air, & Soil Pollution, 229 (9), 302.
- Subramaniam, D. N., Hareindirasarma, S., and Janarthanan, B, 2022. An alternative approach to optimize aggregate-to-cement ratio and compaction in pervious concrete. Arabian Journal for Science and Engineering, 47 (10), 13063–13071.
- Tafesse, S., Fernlund, J. M. R., and Bergholm, F, 2012. Digital sieving-Matlab based 3-D image analysis. Engineering Geology, 137-138, 74–84.
- Wang, L., et al., 2005. Unified method to quantify aggregate shape angularity and texture using Fourier analysis. Journal of Materials in Civil Engineering, 17 (5), 498–504.
- Wijekoon, S. H., et al., 2024. A mathematical model to predict the porosity and compressive strength of pervious concrete based on the aggregate size, aggregate-to-cement ratio and compaction effort. Asian Journal of Civil Engineering, 25, 67–79.
- Xie, X., et al., 2017. Evaluation of morphological characteristics of fine aggregate in asphalt pavement. Construction and Building Materials, 139, 1–8.
- Xu, R., and Di Guida, O. A., 2003. Comparison of sizing small particles using different technologies. Powder Technology, 132 (2), 145–153.
- Xu, H., and Prozzi, J. A, 2019. Correlation of aggregate form properties with Fourier frequencies. Transportation Research Record, 2674 (8), 405–419.
- Zhang, D., Huang, X., and Zhao, Y, 2012. Investigation of the shape, size, angularity and surface texture properties of coarse aggregates. Construction and Building Materials, 34, 330–336.
- Zhang, S., Li, R., and Pei, J, 2019. Evaluation methods and indexes of morphological characteristics of coarse aggregates for road materials: a comprehensive review. Journal of Traffic and Transportation Engineering (English Edition), 6 (3), 256–272.
- Zhao, L., et al., 2020. A digitalized 2D particle database for statistical shape analysis and discrete modeling of rock aggregate. Construction and Building Materials, 247, 117906.
- Zheng, J., et al., 2020. Three-dimensional particle shape characterizations from half particle geometries. Powder Technology, 367, 122–132.
- Zheng, J., and Hryciw Roman, D, 2016. Roundness and sphericity of soil particles in assemblies by computational geometry. Journal of Computing in Civil Engineering, 30, 04016021.
- Zhu, Z., Provis, J. L., and Chen, H, 2018. Quantification of the influences of aggregate shape and sampling method on the overestimation of ITZ thickness in cementitious materials. Powder Technology, 326, 168–180.