References
- Akagunduz, E., & Ulusoy, I. (2007, October). 3D object representation using transform and scale invariant 3D features. 2007 IEEE 11th International Conference on Computer Vision (pp. 1–8). Rio de Janeiro, Brazil: IEEE.
- Baronio, G., Harran, S., & Signoroni, A. (2016). A critical analysis of a hand orthosis reverse engineering and 3D printing process. Applied Bionics and Biomechanics, 2016. doi:https://doi.org/10.1155/2016/8347478
- Baronio, G., Volonghi, P., & Signoroni, A. (2017). Concept and design of a 3D printed support to assist hand scanning for the realization of customized orthosis. Applied Bionics and Biomechanics, 2017. doi:https://doi.org/10.1155/2017/8171520
- Chu, C. H., Huang, S. H., Yang, C. K., & Tseng, C. Y. (2015). Design customization of respiratory mask based on 3D face anthropometric data. International Journal of Precision Engineering and Manufacturing, 16(3), 487–494. doi:https://doi.org/10.1007/s12541-015-0066-5
- Chu, C.-H., & Wang, I.-J. (2018). Mass customized design of cosmetic masks using three-dimensional parametric human face models constructed from anthropometric data. Journal of Computing and Information Science in Engineering, 18(3), 034501. doi:https://doi.org/10.1115/1.4039335
- Coppard, B. M., & Lohman, H. (2014). Introduction to orthotics: A clinical reasoning and problem-solving approach. St. Louis, MO: Elsevier Health Sciences.
- de Almeida, P. H. T., MacDermid, J., Pontes, T. B., Dos Santos-Couto-Paz, C. C., & Matheus, J. P. C. (2017). Differences in orthotic design for thumb osteoarthritis and its impact on functional outcomes: A scoping review. Prosthetics and Orthotics International, 41(4), 323–335. doi:https://doi.org/10.1177/0309364616661255
- Fernandez-Vicente, M., Escario Chust, A., & Conejero, A. (2017). Low cost digital fabrication approach for thumb orthoses. Rapid Prototyping Journal, 23(6), 1020–1031. doi:https://doi.org/10.1108/RPJ-12-2015-0187
- Kraevoy, V., & Sheffer, A. (2004). Cross-parameterization and compatible remeshing of 3D models. ACM Transactions on Graphics (TOG), 23(3), 861–869. doi:https://doi.org/10.1145/1015706
- Lacko, D., Huysmans, T., Parizel, P. M., De Bruyne, G., Verwulgen, S., Van Hulle, M. M., & Sijbers, J. (2015). Evaluation of an anthropometric shape model of the human scalp. Applied Ergonomics, 48, 70–85. doi:https://doi.org/10.1016/j.apergo.2014.11.008
- Li, J., & Tanaka, H. (2018). Feasibility study applying a parametric model as the design generator for 3D-printed orthosis for fracture immobilization. 3D Printing in Medicine, 4(1), 1. doi:https://doi.org/10.1186/s41205-017-0024-1
- Lin, H., Shi, L., & Wang, D. (2015). A rapid and intelligent designing technique for patient- specific and 3D-printed orthopedic cast. 3D Print Medicine Journal, 2(4), 1–10.
- Liu, C. H., Yip, K. S., & Chiang, H. Y. (2018). Investigating the optimal handle diameters and thumb orthoses for individuals with chronic de Quervain’s tenosynovitis–A pilot study. Disability and Rehabilitation, 1(1), 1–7.
- Mao, H. F., Chen, W. Y., Yao, G., Huang, S. L., Lin, C. C., & WN., H. (2010). Cross-cultural adaptation and validation of the quebec user evaluation of satisfaction with assistive technology (QUEST 2.0): The development of the Taiwanese version. Clinical Rehabilitation. doi:https://doi.org/10.1177/0269215509347438
- O’brien, V. H., & McGaha, J. L. (2014). Current practice patterns in conservative thumb CMC joint care: Survey results. Journal of Hand Therapy, 27(1), 14–22. doi:https://doi.org/10.1016/j.jht.2013.09.001
- Paterson, A., Bibb, R. J., & Campbell, R. (2010). A review of existing anatomical data capture methods to support the mass customisation of wrist splints. Virtual and Physical Prototyping, 5(4), 201–207. doi:https://doi.org/10.1080/17452759.2010.528183
- Rogers, M. S., Barr, A. B., Kasemsontitum, B., & Rempel, D. M. (2008). A three-dimensional anthropometric solid model of the hand based on landmark measurements. Ergonomics, 51(4), 511–526. doi:https://doi.org/10.1080/00140130701710994
- Tseng, C. Y., Wang, I. J., & Chu, C. H. (2014). Parametric modeling of 3D human faces using anthropometric data. Paper presented at the Industrial Engineering and Engineering Management (IEEM), 2014 IEEE International Conference on Malaysia, Bandar Sunway, Malaysia.
- Veraldi, T. R. (2017). The rectangle: A hand-based pattern for a dorsal short thumb opponens orthosis with metacarpophalangeal support. Journal of Hand Therapy: Official Journal of the American Society of Hand Therapists. doi:https://doi.org/10.1016/j.jht.2017.10.003
- Wang, C., & Hu, P. (2013). A hole-filling algorithm for triangular meshes in engineering. International Journal for Computational Methods in Engineering Science and Mechanics, 14(5), 465–471. doi:https://doi.org/10.1080/15502287.2013.784385
- Wang, S., Wang, Y., Jin, M., Gu, X. D., & Samaras, D. (2007). Conformal geometry and its applications on 3D shape matching, recognition, and stitching. IEEE Transactions on Pattern Analysis & Machine Intelligence, 7, 1209–1220. doi:https://doi.org/10.1109/TPAMI.2007.1050