Performance of PVD Coated Carbide Inserts When Machining a Nimonic (C-263) Alloy at High Speed Conditions

REFERENCES

• Sims , C. T. and Hagel , W. C. , The Superalloys , A Wiley-Interscience Publication, John Wiley & Sons , ( 1972 ).
   Google Scholar
• Ezugwu , E. O. , Wang , Z. M. and Machado , A. R. , “ The Machinability of Nickel-Based Alloys: A Review ,” Jour, of Materials Processing Tech. , 86 , pp 1 – 16 ( 1999 ).
   Web of Science ®Google Scholar
• Ezugwu , E. O. and Okeke , C. I. , “ Machining of a Nickel-Based (C-263) Alloy with TiAN and TiZrN Coated Carbide Tools,” in Proc. of the 4th Int'l. Conf. on Progress of Cutting and Grinding, Urumqi and Turpan, China , pp 13 – 19 ( 1998 ).
   Google Scholar
• Balazinsid , M. , Litwin , J. and Fortin , C. , “ Influence of the Feed Rate Variation on Tool Wear when Machining Inconel 600 ,” Trans, of the CSME , 17 , 4A , pp 659 – 669 ( 1993 ).
   Web of Science ®Google Scholar
• Ezugwu , E. O. , “ The Performance of Modem Ceramic Cutting Tools in the Machining of Cast Iron ,” Ph. D. Thesis, University of Warwick, Coventry, ( 1986 ).
   Google Scholar
• Okeke , C. I. , “ Threading and Turning of Aerospace Materials with Coated Carbide Inserts ,” Ph.D. Thesis, South Bank University, London, ( 1999 ).
   Google Scholar
• Ezugwu , E. O. and Hew , V. H. “ Effect of Coolant Concentration when Machining Carbon (En 8) and Ni-Cr-Mo (En 24) Steels with Coated Carbide Tools,” in Proc. of the 3rd Int'l. Conf., The Behavior of Materials in Machining. Coventry, UK , pp 0 – 22 ( 1994 ).
   Google Scholar
• Kusuhiko , S. , Yongming , G. and Yamamoto , T. , “ Effects of Substrates and PVD-Coated Layers on Wear of Carbide Tools in Stainless Steel Cutting,” in Proc. of the 4th Int'l. Conf. on Progress of Cutting and Grinding. Urumqi and Turpan, China , pp 38 – 42 ( 1998 ).
   Google Scholar
• Kitagawa , T. , Kubo , A. and Maekawa , K. , “ Temperature and Wear of Cutting Tools in High Speed Machining of Inconel 718 and Ti-6A1-6V-2Sn ,” Wear , 20 , pp 42 – 148 ( 1997 ).
   Google Scholar
• Richards , N. , Curie , A. M. , Aspinwal , D. K. , Smith , D. J. M. and Dewes , R. C. , in Proc. of the 13th Conf. of the Irish Manufacturing Committee, University of Limerick , pp 13 - ( 1996 ).
   Google Scholar
• Ezugwu , E. O. , Wang , Z. M. and C. I. Okeke , “ Tool Life and Surface Integrity when Machining Inconel 718 with PVD and CVD Coated Tools ,” Trib. Trans. , 42 , 2 , pp 353 – 360 ( 1999 ).
   Web of Science ®Google Scholar
• Thomas , J. and Donald , G. , “ How Effective are the Carbide Coatings ,” Modern Machine Shop , p 78 , ( 1981 ).
   Google Scholar
• Colding , B. N. , “ Coated Cutting Tools, Modern Trends in Cutting Tools ,” SME publication, Dearborn, MI. p 54 , ( 1982 ).
   Google Scholar
• Knotek , O. , Loffler , F. and Beele , W. , “ Comparison of Abrasion Model Test Results and Machining Tests with PVD-Coated Indexable Inserts ,” Wear , 162 , p 1033 , ( 1993 ).
   Web of Science ®Google Scholar
• Knotek , O. , Loffler , F. and Kramer , G. , “ PVD Coating of Complex Compositions and Structure for Cutting Tools ,” Jour. of Surface Modification Tech. , 6 , pp 465 – 483 ( 1993 ).
   Google Scholar
• Minevich , A. A. , “ Wear of Cemented Carbide Cutting Inserts with Multilayer Ti-based PVD Coatings ,” Surface and Coatings Tech. , 53 , pp 161 – 170 ( 1992 ).
   Web of Science ®Google Scholar
• Wang , Z. M. Ph.D Thesis, South Bank University, London, ( 1997 ).
   Google Scholar