145
Views
7
CrossRef citations to date
0
Altmetric
Original Articles

A Study of Dynamically Loaded Finite Journal Bearings in Mixed Lubrication Using a Transient Thermohydrodynamic Analysis

, &
Pages 459-464 | Published online: 25 Mar 2008

REFERENCES

  • Boedo , S. and Booker , J. F. , “ Body Force and Roughness Effects in Mass-Conserving Model Based Elastohydrodynamic Lubrication Model,” in Proc. of the Int'l. Trib. Conf., Yokohama , pp 1061 – 1066 ( 1995 ).
  • Ai , X. , Cheng , H. S. , Hua , D. , Moteki , K. and Aoyama , S. , “ A Finite Analysis of Dynamically Loaded Journal Bearings in Mixed Lubrication ,” Trib. Trans. , 44 , 2 , pp 273 – 281 ( 1998 ).
  • Zhang , C. and Zhang , Z. , “ Analysis of Crankshaft Bearings in Mixed Lubrication Including Mass Conserving Cavitation,” in Proc. of 2nd Int'l. Conf. on Hydro-dynamic Bearing-Rotor System Dynamics, Xi'an , pp 18 – 24 ( 1997 ).
  • Zhang , C. , Zhang , Z. and Qiu , Z. , “ Analysis of Mixed Lubrication of Dynamically Loaded Journal Bearings Including Non-Newtonian Effects and Mass Conserving Cavitation,” in Proc. of the 24th Leeds-Lyon Symp. on Trib. , ( 1997 ).
  • Paranjpe , R. S. and Han , T. Y. , “ A Transient Thermohydrodynamic Analysis Including Mass Conserving Cavitation for Dynamically Loaded Journal Bearings ,” ASME Jour. of Lubr. Tech. , 117 , pp 369 – 378 ( 1995 ).
  • Paranjpe , R. S. , “ A Study of Dynamically Loaded Engine Bearings Using a Transient Thermohydrodynamic Analysis ,” Trib. Trans. , 39 , 3 , pp 636 – 644 ( 1996 ).
  • Wang , X. , Wen , S. and Gui , C. , “ An Analysis of the Thermohydrodynamic Performance of Dynamically Loaded Bearings,” in Proc. of The First Asia Int'l. Conf. on Trib., Beijing , pp 25 – 29 ( 1998 ).
  • Zhang , C. , Jiang , J. X. and Cheng , H. S. , “ A Transient Thermohydrodynamic Analysis of Dynamically Loaded Finite Journal Bearings with Rough Surface Including Mass Conserving Cavitation,” in Proc. of the 25th Leeds-Lyon Symp. on Trib. , ( 1998 ).
  • Greenwood , J. A. and Tripp , J. H. , “ The Contact of Two Nominally Rat Rough Surfaces,” in Proc. Inst. Mech. Eng. (London) , 185 , pp 625 – 633 ( 1970–1971 ).
  • Lee , S. C. and Ren , N. , “ Behavior of Elastic-Plastic Rough Surface Contacts as Affected by the Surface Topography, Load and Materials ,” Trib. Trans. , 39 , pp 67 – 74 ( 1996 ).
  • Jiang J. X. , Hua , D. Y. , Cheng , H. S. , Ai , X. and Lee , S. C. , “ A Mixed Elastohydrodynamic Lubrication Model with Asperity Contact ,” A98-Trib-54 ASME/STLE Trib. Conf., Toronto, ( 1998 ).
  • Jiang , J. X. , Hua , D. Y. , Cheng , H. S. , Ai , X. and Lee , S. C. , “ A Mixed Elastohydrodynamic Lubrication Model with Asperity Contact ,” A98-Trib-54 ASME/STLE Trib. Conf., Toronto, ( 1998 ).
  • Christensen , H. , “ Stochastic Models for Hydrodynamic Lubrication of Rough Surfaces,” in Proc. Inst. Mech. Engrs. , 184 , 1 , 55, pp 1013 – 1026 ( 1969–70 ).
  • Dowson , D. , “ A Generalized Reynolds Equation for Fluid Film Lubrication ,” Int'l. Jour. Mech. Sci , Pergamon Press Ltd. , 4 , pp 159 – 170 ( 1962 )
  • Ezzat , H. and Rhode , S. , “ A Study of the Thermohydrodynamic Performance of Finite Slider Bearings ,” Jour. Lubr. Tech. , 95 , pp 298 – 307 ( 1973 ).
  • Polonsky , I. A. and Keer , L. M. , “ A New Numerical Method for Solving Rough Contact Problems Based on the Multi-Level Multi-Summation and Conjugate Gradient Techniques,” submitted to Wear.
  • Nogi , T. and Kato , T. , “ Influence of a Hard Surface Layer on the Limit of Elastic Contact — Part I: Analysis Using a Real Surface Model ,” Jour. of Trib. , 119 , pp 493 – 500 ( 1997 ).
  • Hu , Y. Z. , Barber G. C. and Zhu , D. , “ Numerical Analysis for the Elastic Contact of Real Rough Surfaces ,” 98-NP-2D-1 , 53rd STLE Annual Meeting, Detroit, MI, ( 1998 ).
  • Richtmyer , R. D. , Difference Methods for Initial Value Problems , Interscience Publishers, Inc. , New York , p 101 , ( 1957 ).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.