EHL Performance of the Lubricant With Shear Strength: Part I — Boundary Slippage and Film Failure

REFERENCES

• Dowson , D. and Higginson , G. R. , Elastohydrodynamic Lubrication , Pergamon Press , ( 1977 ).
   Google Scholar
• Dowson , D. , “ Elastohydrodynamics,” in Proc. Inst. Mech. Eng., London , 182 , 3A , ( 1968 ).
   Google Scholar
• Hamrock , B. J. and Dowson , D. , “ Isothermal Elastohydrodynamic Lubrication of Point Contacts: Part III — Full Flooded Results. ” Trans, of the ASME Jour. of Lubr. Tech. , 99 , ( 1977 ).
   Google Scholar
• Spikes , H. A. and Cameron , A. , “ Scuffing as a Desorption Process — An Explanation of the Borsoff Effect ,” ASLE Trans. , 17 , pp 92 – 96 ( 1974 ).
   Google Scholar
• Czichos , H. and Kirschke , K. , “ Investigations Into Film Failure (Transition Point) of Lubricated Concentrated Contacts ,” Wear , 22 , pp 321 – 336 ( 1972 ).
   Web of Science ®Google Scholar
• Hoglund , E. and Jacobson , B. , “ Experimental Investigation of the Shear Strength of Lubricants Subjected to High Pressure and Temperature ,” Trans, of the ASME Jour. of Trib. , 108 , pp 571 – 578 ( 1986 ).
   Web of Science ®Google Scholar
• Bair , S. and Winer , W. O. , “ The High Pressure High Shear Stress Rheology of Liquid Lubricants ,” Trans, of the ASME Jour. of Trib. , 114 , p 1 , ( 1992 ).
   Web of Science ®Google Scholar
• Zhang , Y. and Shizhu , W. , “ Viscoplastic Behavior of Lubricant Film in EHL: Part II — The Influence of Load on Film Slippage and EHL Behavior ,” to be published in Trans, of the ASME Jour. of Trib.
   Google Scholar
• Dyson , A. , Evans , H. P. , Karami , C. , Paliwal , M. C. and Snidle , R. W. , “ Scuffing Failure of Steel Discs: Conditions for the Failure of Elastohydrodynamic Lubrication,” in Proc. Inst. Mech. Eng., London , 204 , pp 91 – 97 ( 1990 ).
   PubMed Web of Science ®Google Scholar
• Patching , M. J. , Kweh , C. C. , Evans , H. P. and Snidle , R. W. , “ Conditions for Scuffing Failure of Ground and Superfinished Steel Disks at High Sliding Speeds Using a Gas Turbine Engine Oil ,” Trans, of the ASME Jour, of Trib. , 117 , pp 482 – 489 ( 1995 ).
   Web of Science ®Google Scholar
• Chang , L. , Jackson , A. and Webster , M. N. , “ Effects of 3-D Surface Topography on the EHL Film Thickness and Film Breakdown ,” Trib. Trans. , 37 , pp 435 – 444 ( 1994 ).
   Web of Science ®Google Scholar
• Evans , H. P. and Snidle , R. W. , “ Film Thinning Factor for Rollers of Finite Width Under Elastohydrodynamic Conditions ,” Wear , 175 , pp 17 – 23 ( 1994 ).
   Web of Science ®Google Scholar
• Czichos , H. , “ Failure Modes of Sliding Lubricated Concentrated Contacts ,” Wear , 28 , pp 95 – 101 ( 1974 ).
   Web of Science ®Google Scholar
• Bailey , M. W. and Cameron , A. , “ The Effects of Temperature and Metal Pairs On Scuffing ,” ASLE Trans. , 16 , p 121 , ( 1973 ).
   Google Scholar
• Christensen , H. , “ Failure by Collapse of Hydrodynamic Oil Films ,” Wear , 22 , pp 359 – 366 ( 1972 ).
   Web of Science ®Google Scholar
• Cheng , H. S. and Sternlicht , B. , “ A Numerical Solution for the Pressure, Temperature, and Film Thickness Between Two Infinitely Long, Lubricated Rolling and Sliding Cylinders Under Heavy Loads ,” Trans, of the ASME Jour. of Basic Eng. , pp 695 – 707 ( 1965 ).
   Google Scholar
• Kim , K. H. and Sadeghi , F. , “ Non-Newtonian Elastohydrodynamic Lubrication of Point Contact ,” Trans, of the ASME Jour. of Trib. , 113 , pp 703 – 711 ( 1991 ).
   Web of Science ®Google Scholar
• Conry , T. F. , Wang , S. and Cusano , C. , “ A Reynolds-Eyring Equation for Elastohydrodynamic Lubrication in Line Contacts ,” Trans, of the ASME Jour. of Trib. , 109 , pp 648 – 658 ( 1987 ).
   Web of Science ®Google Scholar
• Lee , D. , Sanborn , D. M. and Winer , W. O. , “ Some Observations of the Relationship Between Film Thickness and Load in High Hertz Pressure Sliding Elastohydrodynamic Contacts ,” Trans, of the ASME Jour. of Lubr. Tech. , 95 , pp 386 – 390 ( 1973 ).
   Web of Science ®Google Scholar
• Jacobson , B. O. and Hamrock , B. J. , “ Non-Newtonian Fluid Model Incorporated Into Elastohydrodynamic Lubrication of Rectangular Contacts ,” Trans, of the ASME Jour. of Trib. , 106 , pp 275 – 283 ( 1984 ).
   Web of Science ®Google Scholar
• Shieh , J. and Hamrock , B. J. , “ Film Collapse in EHL and Micro-EHL ,” Trans. of the ASME Jour. of Trib. , 113 , pp 372 – 377 ( 1991 ).
   Web of Science ®Google Scholar
• Shizhu , W , and Zhang , Y. , “ Viscoplastic Behavior of Lubricant Film in EHL: Pari I — Film Slippage and Its Growth ,” to be published by Trans, of the ASME Jour. of Trib.
   Google Scholar
• Paul , G. R. and Cameron , A. , “ The Ultimate Shear Stress of Fluids at High Pressures Measured By a Modified Impact Microviscometer,” in Proc. Roy. Soc. London , A.365 , pp 31 – 41 ( 1979 ).
   Google Scholar
• Evans , C. R. and Johnson , K. L. , “ The Rheological Properties of Elastohydrodynamic Lubricants,” in Proc. Inst. Mech. Eng. , 200 , pp 303 – 312 ( 1986 ).
   Web of Science ®Google Scholar
• Jacobson , B. O. , “ On the Lubrication of Heavily Loaded Spherical Surfaces Considering Surface Deformations and Solidification of the Lubricant ,” Acta Polytechnica Scandinavica , Mech. Eng. Series No. 54 , ( 1970 ).
   Google Scholar
• Bair , S. and Winer , W. O. , “ Shear Strength Measurements of Lubricants at High Pressure ,” Trans. of the ASME Jour. of Lubr. Tech. , 101 , pp 251 – 257 ( 1979 ).
   Web of Science ®Google Scholar
• Bair , S. and Winer , W. O. , “ The High Shear Stress Rheology of Liquid Lubricants at Pressures of 2 to 200 MPa ,” Trans, of the ASME Jour. of Trib. , 112 , pp 246 – 253 ( 1990 ).
   Web of Science ®Google Scholar
• Johnson , K. L. and Tevaarwerk , J. L. , “ Shear Behavior of Elastohydrodynamic Oil Films,” in Proc. Roy. Soc. London , 356 , Ser. A, pp 215 – 236 ( 1977 ).
   Google Scholar
• Bair , S. and Winer , W. O. , “ A Rheological Model for Elastohydrodynamic Contacts Based on Primary Laboratory Data ,” Trans, of the ASME Jour. of Lubr. Tech. , 101 , pp 258 – 265 ( 1979 ).
   Web of Science ®Google Scholar
• Eyring , H. , “ Viscosity, Plasticity and Diffusion as Examples of Reaction Rates ,” Jour. Chem. Phys. , 4 , p 283 , ( 1936 ).
   Web of Science ®Google Scholar
• Smith , F. W. , “ Lubricant Behavior in Concentrated Contacts — Some Rheological Problems ,” ASLE Trans. , 3 , pp 18 – 25 ( 1960 ).
   Google Scholar
• Lee and Hamrock , B. J. , “ A Circular Non-Newtonian Fluid Model: Pari I — Used in EHL ,” Trans, of the ASME Jour. of Trib. , 112 , p 486 , ( 1990 ).
   Web of Science ®Google Scholar
• Chang , L. and Zhao , W. , “ Fundamental Differences Between Newtonian and Non-Newtonian Mirco-EHL Results ,” Trans, of the ASME Jour. of Trib. , 117 , pp 29 – 35 ( 1995 ).
   Web of Science ®Google Scholar
• Czichos , H. , “ Failure Criteria in Thin Film Lubrication: Investigation of the Different Stages of Film Failure ,” Wear , 36 , pp 13 – 17 ( 1976 ).
   Web of Science ®Google Scholar
• Johnson , K. L. and Higginson , J. G. , “ A Non-Newtonian Effect On Sliding In Micro EHL ,” Wear , 128 , pp 249 – 264 ( 1988 ).
   Web of Science ®Google Scholar
• Johnston , C. J. , Wayte , R. and Spikes , H. A. , “ The Measurement and Study of Very Thin Lubricant Film in Concentrated Contacts ,” Trib. Trans. , 34 , pp 187 – 194 ( 1991 ).
   Web of Science ®Google Scholar
• Feng , R. and Ramesh , K. T. , “ The Rheology of Lubricants at High Shear Rates ,” Trans, of the ASME Jour. of Trib. , 115 , pp 640 – 649 ( 1993 ).
   Web of Science ®Google Scholar