A Study of Non-Recessed Hybrid Flexible Journal Bearing With Different Restrictors

REFERENCES

• Rowe , W. B. , Xu , S. X. , Chong , F. S. and Weston , W. , “ Hybrid Journal Bearings with Particular Reference to Hole-Entry Configurations ,” Trib. Int'l. , 15 , 6 pp 339 – 348 ( 1982 ).
   Google Scholar
• El Kayar , A. , Salem , E. A. , Khalil , M. F. and Hegazy , A. A. , “ Two-Dimensional Finite Difference Solution for Externally Journal Bearings of Finite Length ,” Wear , 84 , pp 1 – 13 ( 1983 ).
   Google Scholar
• Yoshimoto , S. , Rowe , W. B. and Ives , D. , “ A Theoretical Investigation of the Effect of Inlet Pocket Size on the Performance of Hole-Entry Journal Bearing Employing Capillary Restrictors ,” Wear , 127 , pp 307 – 318 ( 1988 ).
   Google Scholar
• Palzewicz , A. , “ Hydrostatic Journal Bearing without Pressure Chambers Between Bearing Surface ,” Wear , 159 , pp 31 – 38 ( 1982 ).
   Google Scholar
• Shangxian and Xu , “ Experimental Investigation of Hybrid Bearings ,” Trib. Trans. , 37 , 2 , pp 285 – 292 ( 1994 ).
   Google Scholar
• Sharma , S. C. , Sinhasan , R. and Jain , S. C. , “ An Elastohydrostatic Study of Hole-Entry Hybrid Flexible Journal Bearings with Capillary Restrictors ,” Trib. Int'l. , 26 , 2 , pp 93 – 107 ( 1993 ).
   Google Scholar
• Jain , S. C. , Sharma , S. C. and Nagraju , T. , “ Misaligned Journal Effects in Liquid Hydrostatic Non-recessed Journal Bearings ,” Wear , 210 , pp 67 – 75 ( 1997 ).
   Web of Science ®Google Scholar
• Shires , G. L. and Dee , C. W. , “ Pressurized Bearings with Inlet Slots,” in Proc. of the Southampton Univ. Gas Bearing Symp., Paper 7, U.K. , ( 1967 ).
   Google Scholar
• Dee , C. W. and Shires , G. L. , “ The Current State of the Art of Fluid Bearings with Discrete Slot Inlets ,” Trans. ASME. Jr. of Lubr. Tech. , 93 , 2 , pp 441 – 450 ( 1974 ).
   Google Scholar
• Stout , K. J. and Rowe , W. B. , “ Externally Pressurized Bearings - Design for Manufacture, Part 1- Journal Bearing Selection ,” Trib. Int'l. , 7 , 3 , pp 98 – 106 ( 1974 ).
   Google Scholar
• Stout , K. J. and Rowe , W. B. , “ Externally Pressurized Bearings - Design for Manufacture, Part 3- Design of Liquid Externally Pressurized Bearings for Manufacture Including Tolerencing Procedure ,” Trib., Int'l. , 4 , 5 , pp 195 – 212 ( 1974 ).
   Google Scholar
• Rowe , W. B. , Koshal , D. and Stout , K. J. , “ Slot-Entry Bearings for Hybrid Hydrodynamic and Hydrostatic Operation ,” Jour. of Mech. Eng. Science , 18 , 2 , pp 73 – 78 ( 1976 ).
   Google Scholar
• Rowe , W. B. , Kosha , D. and Stout , K. J. , “ Investigation of Recessed Hydrostatic and Slot-Entry, Journal Bearings for Hybrid Hydrodynamic and Hydrostatic Operation ,” Wear , 43 , pp 55 – 69 ( 1977 ).
   Web of Science ®Google Scholar
• Koshal , D. and Rowe , W. B. , “ Fluid Film Journal Bearings Operating in a Hybrid Mode, Part I - Theoretical Analysis and Design ,” Trans. ASME, Jour. of Lubr. Tech. , 103 , pp 558 – 568 ( 1981 ).
   Google Scholar
• Koshal , D. and Rowe , W. B. , “ Fluid Film Journal Bearings Operating in a Hybrid Mode, Part II - Experimental Investigation ,” Trans. ASME, Jour. of Lubr. Tech. , 103 , pp 566 – 572 ( 1981 ).
   Google Scholar
• Vermeulen , M. , “ Pressure Cut-Off Behavior of a Hybrid Slot-Entry Pivoting Pad,” in Proc. of IMechE, Tribology-Friction, Lubrication and Wear, C186 , pp 129 – 141 ( 1987 ).
   Google Scholar
• Ives , D. and Rowe , W. B. , “ The Effect of Multiple Sources on Performance of Heavily Loaded Pressurized High Speed Journal Bearings,” in Proc. IMechE Trib. Friction, Lubr. and Wear, C199 , pp 121 – 128 ( 1987 ).
   Google Scholar
• Ives , D. and Rowe , W. B. , “ The Performance of Hybrid Journal Bearings in the Superlaminar Flow Regimes ,” Trib. Trans. , 35 , 4 , pp 627 – 632 ( 1992 ).
   Web of Science ®Google Scholar
• Cheng , K. and Rowe , W. B. , “ A Selection Strategy for the Design of Externally Pressurized Journal Bearings ,” Trib., Int'l. , 28 , 7 , pp 465 – 474 ( 1995 ).
   Google Scholar
• Sharma , S. C. , Kumar , V. , Jain , S. C. , Sinhasan , R. and Subramanian , M. , “ A Study of Slot-Entry Hydrostatic/Hybrid Journal Bearing Using the Finite Element Method ,” Trib., Int'l. , 32 , 4 , pp 185 – 196 ( 1999 ).
   Google Scholar
• Rowe , W. B. , “ Hydrostatic and Hybrid Bearing Design ,” Butterworths , London ( 1983 ).
   Google Scholar