116
Views
4
CrossRef citations to date
0
Altmetric
Original Articles

Analyzing Elastic-Plastic Real Rough Surface Contact in Running-in

, &
Pages 428-436 | Published online: 25 Mar 2008

REFERENCES

  • Ai , X. , “ Effect of Three-Dimensional Random Surface Roughness on Fatigue Life of a Lubricated Contact ,” ASME Jour. of Trib. , 120 , pp 159 – 164 ( 1998 ).
  • Ai , X. and Sawamiphakdi , K. , “ Solving Elastic Contact Between Rough Surfaces as an Unconstrained Strain Energy Minimization by Using CGM and FFT Techniques ,” ASME Jour. of Trib. , 121 , pp 639 – 647 ( 1999 ).
  • Bailey , D. M. and Sayles , R. S. , “ Effect of Roughness and Sliding Friction on Contact Stresses ,” ASME Jour. of Trib. , 113 , pp 729 – 738 ( 1991 ).
  • Bhushan , B. , Tribology and Mechanics of Magnetic Storage Devices , Springer-Verlag , NY , ( 1990 ).
  • Chang , W. R. , Etsion , I. and Bogy , D. B. , “ An Elastic-Plastic Model for the Contact of Rough Surfaces ,” ASME Jour. of Trib. , 109 , pp 257 – 263 ( 1987 ).
  • Francis , H. A. , “ The Accuracy of Plane-Strain Models for the Elastic Contact of Three-Dimensional Rough Surfaces ,” Wear , 85 , pp 239 – 256 ( 1983 ).
  • Greenwood , J. A. and Williamson , J. B. P. , “ Contact of Nominally Flat Surface ,” in Proc. Roy. Soc. (London), Series A. , 295 , pp 300 – 319 ( 1966 ).
  • Johnson , K. L. , Contact Mechanics, 1st Ed. , Cambridge University Press , ( 1985 ).
  • Johnson , K. L. , “ Contact Mechanics and the Wear of Metals ,” Wear , 190 , pp 162 – 170 ( 1995 ).
  • Ju , Y. and Zheng , L. , “ A Full Numerical Solution for the Elastic Contact of Three-Dimensional Real Rough Surfaces ,” Wear , 157 , pp 151 – 161 ( 1992 ).
  • Kalker , J. J. and van Randen , Y. , “ A Minimum Principle for Frictionless Elastic Contact with Application to Non-Hertzian Half-Space Contact Problems ,” Jour. of Eng. Math. , 6 , pp 193 – 206 ( 1972 ).
  • Kalker , J. J. , Three-Dimensional Elastic Bodies in Rolling Contact , Kluwer , Dordrecht , ( 1990 ).
  • Kolmogorov , V. , “ Friction and Wear Model for a Heavily Loaded Sliding Pair: Pan I — Metal Damage and Fracture Model ,” Wear , 194 , pp 71 – 79 ( 1996 ).
  • Komvopoulos , K. , Saka , N. and Suh , N. P. , “ The Mechanism of Friction in Boundary Lubrication ,” ASME Jour. of Trib. , 107 , pp 452 – 462 ( 1985 ).
  • Leaver , R. H. , Sayles , R. S. and Thomas , T. R. , “ Mixed Lubrication and Surface Topography of Roll Contacts ,” in Proc. Instn. Mech. Engrs. , 188 , pp 461 – 469 ( 1974 ).
  • Lee , S. C. and Ren , N. , “ Behavior of Elastic-Plastic Rough Surface Contact Areas Affected by Surface Topography, Load and Material Hardness ,” Trib. Trans. , 39 , 1 , pp 67 – 74 ( 1996 ).
  • Love , A. E. H. , “ The Stress Produced in a Semi-infinite Solid by Pressure on Part of the Boundary ,” Phil. Trans. Roy. Soc. (London), Series A. , 228 , pp 377 – 420 ( 1929 ).
  • Merriman , T. and Kannel , J. , “ Analysis of the Role of Surface Roughness on Contact Stresses Between Elastic Cylinders With and Without Soft Surface Coatings ,” ASME Jour. of Trib. , 111 , pp 87 – 94 ( 1989 ).
  • Nogi , T. and Kato , T. , “ influence of a Hard Surface Layer on the Limit of Elastic Contact — Part I: Analysis Using a Real Surface Model ,” ASME Jour. of Trib. , 119 , pp 493 – 500 ( 1997 ).
  • Poon , C. Y. and Sayles , R. S. , “ Numerical Contact Model of a Smooth Ball on an Anisotropic Rough Surface ,” ASME Jour. of Trib. , 116 , pp 194 – 201 ( 1994 ).
  • Ren , N. and Lee , S. C. , “ The Effect of Surface Roughness and Topography on the Contact Behavior of Elastic Bodies ,” ASME Jour. of Trib. , 116 , pp 804 – 811 ( 1994 ).
  • Richards , T. H. , Energy Methods in Stress Analysis, Ellis Horwood Series in Engineering Science , ( 1977 ).
  • Sackfield , A. and Hills , D. A. , “ Some Useful Results in the Classical Hertz Contact Problem ,” Jour. of Strain Analysis , 18 , 2 , pp 101 – 105 ( 1983a ).
  • Sackfield , A. and Hills , D. A. , “ Some Useful Results in the Tangentially Loaded Hertz Contact Problem ,” Jour. of Strain Analysis , 18 , 2 , pp 107 – 110 ( 1983b ).
  • Snackfield , A. and Hills , D. , “ A Note on the Hertz Contact Problem: A Correlation of Standard Formulae ,” Jour. of Strain Analysis , 18 , 3 , pp 195 – 197 ( 1983c ).
  • Suh , N. P. , “ An Overview of the Delamination Theory of Wear ,” Wear , 44 , pp 1 – 16 ( 1977 ).
  • Suresh , S. , Fatigue of Materials , Cambridge University Press , ( 1992 ).
  • Tabor , D. , The Hardness of Metals , Oxford University Press , Oxford , ( 1951 ).
  • Thomas , T. K. , Roughness Surfaces , Imperial College Press , Second Edition , ( 1999 ).
  • Tian , X. and Bhushan , B. , “ A Numerical Three-Dimensional Model for the Contact of Rough Surfaces by Variational Principle ,” ASME Jour. of Trib. , 118 , pp 33 – 42 ( 1996 ).
  • Timshenko , S. P. and Goodier , J. N. , Theory of Elasticity , 3rd Ed. , McCraw-Hill , NY , ( 1970 ).
  • Webster , M. N. and Sayles , R. S. , “ A Numerical Model for the Elastic Frictionless Contact of Real Rough Surfaces ,” ASME Jour. of Trib. , 108 , pp 314 – 320 ( 1986 ).
  • Xian , L. and Zheng , L. , “ A Numerical Model for the Elastic Contact of Three-Dimensional Real Rough Surfaces ,” Wear , 148 , pp 91 – 100 ( 1991 ).
  • Zhou , K. S. , Cheng , H. S. , and Mura , T. , “ Micropitting in Rolling and Sliding Contact Under Mixed Lubrication ,” ASME Jour. of Trib. , 111 , pp 605 – 613 ( 1989 ).
  • Zum Gahr , K. H. , Microstructure and Wear of Materials , Elsevier , Amsterdam , p 101 , ( 1987 ).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.