REFERENCES
- Gardner , W. and Ulschmid , J. , “ Turbulence Effects in Two Journal Bearing Applications ,” ASME Paper No. 73-LubS-7 , ( 1973 ).
- DeChoudhury , P. and Barth , E. , “ A Comparison of Film Temperatures and Oil Discharge Temperature for a Tilting-Pad Journal Bearing ,” ASME Jour. of Lubr. Tech. , 103 , pp 115 – 119 ( 1981 ).
- Tripp , H. and Murphy , B. , “ Eccentricity Measurements on a Tilting-Pad Bearing ,” ASME Trans. , 28 , 2 , pp 2l7 – 224 ( 1984 ).
- Brockwell , K. and Kleinbub , D. , “ Measurements of the Steady-State Operating Characteristics of the Five Shoe Tilting Pad Journal Bearing ,” Trib. Trans. , 32 , 2 , pp 267 – 275 ( 1989 ).
- Harangozo , A. , Stolarski , T. and Gozdawa , R. , “ The Effect of Different Lubrication Methods on the Performance of a Tilting Pad Journal Bearing ,” Trib. Trans. , 34 , pp 529 – 536 ( 1991 ).
- Simmons , J. and Dixon , S. , “ Effect of Load Direction, Preload, Clearance Ratio, and Oil Flow on the Performance of a 200 mm Journal Pad Bearing ,” STLE Preprint No. 93-AM-2E-3 , ( 1993 ).
- Pettinato , B. and DeChoudhury , P. , “ Test Results of Key and Spherical Pivot Five-Shoe Tilt Pad Journal Bearings — Part I: Performance Measurements ,” Trib. Trans. , 42 , 3 , pp 541 – 547 ( 1999 ).
- Dmochowski , W. , Brockwell , K. and DeCamillo , S. , “ A Study of the Thermal Characteristics of the Leading Edge Groove and Conventional Tilting Pad Journal Bearings ,” ASME Jour. of Trib. , 115 , pp 219 – 226 ( 1993 ).
- Simmons , J. and Lawrence , C. , “ Performance Experiments with a 200 mm, Offset Pivot Journal Pad Bearing ,” STLE Preprint No. 96-AM-7B-4 , ( 1996 ).
- DeChoudhury , P. and Masters , D. , “ Performance Tests of Five-Shoe Tilting-Pad Journal Bearing ,” ASLE Trans. , 27 , 1 , pp 61 – 66 ( 1983 ).
- DeChoudhury , P. and Masters , D. , “ Slow Roll Tests on a Five Shoe Tilting-Pad Journal Bearing ,” STLE Preprint No. 84-AM-2D-1 , ( 1984 ).
- Brockwell , K. and Dmochowski , W. , “ Thermal Effects in the Tilting Pad Journal Bearing ,” Jour. Phys. D: Appl. Phys. , 25 , pp 384 – 392 ( 1992 ).
- Makino , T. and Taniguchi , S. , “ Thermohydrodynamic Performance of High Speed Journal Bearings ,” in Proc. Instn. Mech. Engrs. , 210 , pp 179 – 187 ( 1996 ).
- Brockwell , K. , Dmochowski , W. and DeCamillo , S. , “ Analysis and Testing of the Leading Edge Groove Tilting Pad Journal Bearing - A New Design for Increasing Load Capacity, Reducing Operating Temperatures and Conserving Energy,” in Proc. of the Texas A&M 23rd Turbomachinery Symp. , ( 1994 ).
- Nicholas , J. , “ Tilting Pad Bearing Design,” in Proc. of the Texas A&M 23rd Turbomachinery Symp. , ( 1994 ).