The Friction Reducing Properties of Molybdenum Dialkyldithiocarbamate Additives: Part I — Factors Influencing Friction Reduction

REFERENCES

• Arai , K. , and Yamamoto , Y. ( 2000 ), “ Effect of Molybdenum Dithiocarbamate on Friction and Wear properties Between Aluminium Alloy and Steel ,” Trib. Trans. , 43 , 1 , pp 45 – 50
   Web of Science ®Google Scholar
• Bovington , C. , Anghel , V. and Spikes , H A. , ( 1996 ), “ Predicting sequence VI and VIA Fuel Economy from Laboratory Bench Tests ,” SAE Tech. Paper 961142.
   Google Scholar
• Braithwaite , E R. and Greene , A B. ( 1978 ), “ A Critical Analysis of the Performance of Molybdenum ,” Wear , 46 , pp 405 – 433
   Web of Science ®Google Scholar
• En-Caizheng and Quian , X. ( 1986 ), “ Tribological Properties and Lubrication Mechanisms of MoDTC and Calcium Compounds in Greases ,” Wear , 130 , pp 233 – 247
   Google Scholar
• Gondo , S. and Konishi , M. ( 1987 ), “ Organoamine and Organophosphate Molybdenum Complexes as Lubricant Additives ,” Wear , 120 , pp 51 – 60
   Web of Science ®Google Scholar
• Graham , J. , Jensen , R K. and Spikes , H A. ( 2001 ), “ The Friction Reducing properties of Molybdenum Dialkyldithiocarbamate Additives: Part 2 — Durability of Friction Reducing Capability ,” Trib. Trans. , 44 , 4 , pp 637 – 647
   Web of Science ®Google Scholar
• Graham , J C. H. ( 2001 ), The Behaviour of Molybdenum Dialkyldithiocarbamate Friction Modifier Additives , PhD Thesis , University of London.
   Google Scholar
• Greene , A B. and Risdon , T J. ( 1981 ), “ Effect of Mo-Containing Oil Soluble friction Modifiers on Engine Fuel Economy and Gear Oil Efficiency ,” SAE Tech. Paper 811187.
   Google Scholar
• Grossiord , C. , Varlot , K. , Martin , J M. , Le Mogne , T. , Esnouf , C. and Inoue , K. ( 1998 ), “ MoS2, Single Sheet Lubrication by Molydenum Dithiocarbamate ,” Trib. Int'l. , 31 , pp 737 – 743
   Web of Science ®Google Scholar
• Groissard , C. , Martin , J-M. , Le Mogne , T. , Inoue , K. and Igarashi , J. ( 1999 ), “ Friction-Reducing Mechanisms of Molybdenum Dithiocarbamate Zinc Dithiophosphate Combination: New Insights in MoS2 Genesis ,” Jour. Vacuum Sci. and Tech. A Vacuum Surfaces and Surface Films , 17 , pp 884 – 890
   Web of Science ®Google Scholar
• Isoyama , H. and Sakurai , T. ( 1974 ), “ The Lubricating Mechanism of Di-μ-thiodithio-bis (diethyldithiocarbamate) Dimolybdenum During Extreme Pressure Lubrication ,” Trib. Int'l. , 7 , pp 151 – 160
   Google Scholar
• Johnson , M D. , Jensen , R K. and Korcek , S. ( 1997 ), “ Base Oil Effects on Friction Reducing Capabilities of Molybdenum Dialkyldithiocarbamate-Containing Engine Oils ,” SAE Tech. Paper 972860.
   Google Scholar
• Kajdas , C. ( 1987 ), “ About an Anionic-radical Concept of the Lubrication Mechanism of Alcohols ,” Wear , 116 , pp 167 – 180
   Web of Science ®Google Scholar
• Kusrai , M. , Cutler , J N. , Gore , K. , Canning , G. and Bancroft , G M. ( 1998 ), “ The Chemistry of Antiwear Films Generated by the Combination of ZDDP and MoDTC Examined by X-Ray Absorption Spectroscopy ,” Trib. Trans. , 41 , 1 , pp 69 – 77
   Web of Science ®Google Scholar
• LaFountain , A R. , Spikes , H A. and Johnston , G J. ( 1998 ), “Shear Rheological Response of Base Fluid Blends,” in Proc. STLE Annual Meeting, Detroit, May 1998, submitted for publication in Trib. Trans.
   Google Scholar
• McDevitt , N T. , Donley , M S. and Zabinski , J S. ( 1993 ), “ Utilization of Raman-Spectroscopy in Tribochemical Studies ,” Wear , 166 , pp 65 – 72
   Web of Science ®Google Scholar
• Michael , D. , Mingos , P. and Wales , D J. ( 1990 ), Introduction to Cluster Chemistry , 2nd Ed. , Publ. Prentice-Hall , Englewood Cliffs.
   Google Scholar
• Mitchell , P S. ( 1984 ), “ Oil-Soluble Mo-S Compounds as Lubricant Additives ,” Wear , 100 , pp 281 – 300
   Web of Science ®Google Scholar
• Muraki , M. , Yanagi , Y. and Sakaguchi , K. ( 1997 ), “ Synergistic Effect on Frictional Characteristics Under Rolling-Sliding Conditions Due to a Combination of Molybdenum Dialkyldithiocarbamate and Zinc Dithiophosphate ,” Trib. Int'l. , 30 , pp 69 – 75
   Web of Science ®Google Scholar
• Musha , K. , Ohashi , Y. , Yamazaki , S. , Toda , S. and Tanaka , S. ( 1983 ), “ Structural Analysis of Dinuclear Molybdenum (V) Dibutyldithiocarbamate Complexes and Crystal Structure of Di-u-sulphido-bis(oxo dibutyldithiocarbamato) Molybdenum (V) ,” Jour. of the Chem. Soc. of Japan , 5 , pp 636 – 658
   Google Scholar
• Sebnik , R F. ( 1993 ), “ Molybdenum Disulphide in Grease, Oil Dispersions, and Solid Films ,” NLGI Spokesman , 57 , pp 96 – 106
   Google Scholar
• Sorab , J. , Korcek , S. and Bovington , C. ( 1998 ), “ Friction Reduction in Lubricated Components Through Engine Oil Formulation ,” SAE Tech Paper 982640.
   Google Scholar
• Spikes , H A. , Bovington , C. , Caprotti , R. , Meyer , K. and Kreiger , K. ( 1995 ), “ Development of a Laboratory Test to Predict Lubricity Properties of Diesel Fuels and its Application to the Development of Highly Refined Diesel Fuels ,” Tribotest 2 , pp 93 – 112
   Google Scholar
• Tohyama , M. , Ohmori , T. , Shimura , Y. , Akiyama , K. , Ashida , T. and Kojima , N. ( 1996 ), “ Mechanism of Friction Reduction with Organo-Molybdenum Type Additives ,” in Proc. Int'l. Trib. Conf., Yokohama 1995 , pp 739 – 744 publ. JST, Tokyo.
   Google Scholar
• Topolovec-Miklozic , K. , Graham , J. and Spikes , H. , ( 2001 ), “ Chemical and Physical Analysis of Reaction Films Formed by Molybdenum Dialkyldithiocarbamate Friction Modifier Additive Using Raman and Atomic Force Microscopy ,” Tribology Letters , 11 , pp. 71–81.
   Web of Science ®Google Scholar
• Tripaldi , G. , Fattori , S. , Nodari , R. and Vettor , A. ( 1999 ), “An Investigation on the Antifriction Performance of Some Organomolybdenum Additives,” in Proc. Leeds/Lyon Symp., Lubrication at the Frontier, Lyon, Sept. (1998) , publ. Elsevier , Amsterdam 1999, Dowson , D. , Ed., et al.
   Google Scholar
• Willermet , P A. , Carter , R O. , Schmitz , P J. , Everson , M. , Scholl , D J. and Weber , W H. ( 1997 ), “ Formation, Structure and Properties of Lubricant-Derived Antiwear Films ,” Lubr. Science , 9 , pp 325 – 347
   Google Scholar
• Yamamoto , Y. and Gondo , S. ( 1989 ), “ Friction and Wear Characteristics of Molybdenum Dithiocarbamate and Molybdenum Dithiophosphate ,” Trib. Trans. , 32 , 1 pp 251 – 257
   Google Scholar
• Yamamoto , Y. and Gondo , S. ( 1994 ), “ Environmental Effects on the Composition of Surface Films by an Organo-Molybdenum Compound ,” Trib. Trans. , 37 , 1 , pp 182 – 188
   Web of Science ®Google Scholar
• Zabinski , J S. , Donely , M S. , Walck , S D. , Schneider , T R. , McDevitt , N T. ( 1995 ), “ The Effects of Dopants on the Chemistry and Tribology of Sputter-Deposited MoS2 Films ,” Trib. Trans. , 38 , 4 , pp 894 – 904
   Web of Science ®Google Scholar